steam. I don’t want to hold trigger too long in case something blows. In past steam has been quick to come out as soon as red light goes off. Any ideas?
Domotec Vacuums

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
Heating Element. A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.
After you let your steam mop`s tank soak, plug it in, turn it on, and give it time to get hot. Once it builds up enough steam, pull the trigger and allow the device to spray with the vinegar in the tank. As the steam shoots out, it should help clear out a blocked nozzle while also removing any other buildup inside.
If the device isn`t producing steam, please try the following: Check for any debris or blockages in the head and main body. Empty and refill the tank. Check for any limescale/debris in the tank itself and descale if necessary.
What ultimately killed the Steam Machine was Valve`s insistence on only using Linux. With the vast majority of PC games running on Windows, this drastically limited the number of games you could play. Some manufacturers simply swapped out the OS and resold their Steam Machines without the branding.
Except when you are descaling a steam mop, do NOT put anything other than water in the tank. Not only does this defeat the primary purpose of steam cleaning (in avoiding chemical cleaners), but you can possibly damage your steam cleaner. For many steamers, you may also be voiding your warranty in the process.
Shark Pocket will not make steam

Check that your water tank is full, if you find it is empty, add water. Also check that the tank is free of any cracks or holes that could cause water to leak, and that the tank is properly seated in the device`s housing.

We get this question all the time, here`s why! Steam Temperature: Good residential units have boiler steam temperature between 240 and 298 degrees Fahrenheit. For serious cleaning avoid any steam cleaner that has a lower average steam temperature. Hotter steam means a quantum increase in cleaning effectiveness.
When you are blocked on Steam, you cannot access the profile or UGC of that character. If that character has blocked you, they will show you unavailable in your friends` list. However, if you go to the Friends tab within the user and he`s playing the game, you`ll notice that he`s online.
Descale your machine – it`s no secret that water contains minerals, which can be left behind (in the form of limescale) in your steam cleaner`s boiler tank and hinder the performance of the appliance.
Soap only lifts dirt and oil into water, making them suspend in water. Therefore, the more soap you use, the more your mop gets saturated with dirt. So, if you do not remove all the soapy water from the floor, the dirt remains, forming streaks on the floor.
Do Steam Cleaners Use Soap or Chemicals? These appliances use only clean, cold, tap water. No chemical or detergents can, or should, be used in these systems.
So if Steam dies, and if the software you want to run isn`t dependent upon some online mode created by the programmer, things would still run. It`d be an offline mode program, essentially. Any game that you own on the Steam library but have not downloaded, however, would not be there if the company goes away.
Fill the Tank With Vinegar

Fill the tank with distilled white vinegar or cleaning vinegar. Avoid using other types of vinegar because they may have sediment that interferes with the cleaning process.

We have had some customers who have had their steam cleaners for 5-8 years and are still going strong. For less expensive models like the steam mops or handhelds, you should probably expect more like 3-6 years of consistent use.
Handheld steamers typically work best (and fastest) on thinner fabrics like silk, polyester, and linen. If your wardrobe consists mainly of these delicate materials, you`ll rarely need to pull out the iron—in fact, you probably don`t want to iron anyway for fear of scorching them, Jackie says.
Cook just until shells pop open wide, that`s the best way to tell when they`re done. When steaming, keep liquid at a minimum so the mollusks aren`t boiled.
The first time you use your garment steamer, it might not produce steam right away as there is no water in the system yet. Don`t worry; this is normal and will only happen the first time you use it. Please press the steam trigger for one minute. This will promote water circulation and the production of steam.
Fill your steamer with cold water and plug it in. Let the device “cook” until it begins to emit steam. Working on the wrong side, pull the steamer over the surface of each garment from top to bottom. Turn the clothing right side out and drag the steamer down the fabric from top to bottom.
Typical steam cleaners can use anywhere from 1000 to 1800 watts. (For comparison sake, a typical lamp uses about 60 watts, while a typical computer uses about 365 watts).
You get the best results after eliminating dirt and dust from the surface of your carpet. If the carpet is not vacuumed before steam cleaning, your carpet will look clean on the surface but remain dirty underneath. The steam cleaner cannot get rid of loose soil that is embedded deep inside the carpet fibers.
Sometimes Steam doesn`t close properly, so when you are trying to start it, it won`t open because it already is open. To fix this, you just have to open your Task Manager and look for Steam in “Processes”. If you found it, just right-click it and select “end task”. Now you should be able to open Steam again.
Hiding Games in Your Steam Library

Right-click on the game that you want to hide, then click Manage > Hide this game to hide it. Your game will no longer appear in your library. It won`t be deleted, it just won`t be visible until you decide to restore it.

Use as a descaler

Limescale can be easily dissolved using a mild acid solution, such as diluted white vinegar. For example, when descaling a kettle, simply fill the kettle with equal parts vinegar and water and leave for an hour before boiling and then letting stand for another 20 minutes.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of
ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER

Read Full Q/A … : Domotec Vacuums

I purchased a Euro-Pro Steamer Mop 9 months ago and the Mop had just quit steaming. The green light is on and it makes a steaming sound but it is not getting hot and does not shoot out any steam like it should. Does it have an element or something that has gone bad in such a short time???
ANSWER : Hi,
Yeah, element is bad…

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Read Full Q/A … : Domotec Vacuums

Hi, this is our third Dyson DC-16.. the Trigger was shorting out on the first two.. Now we have the third one for about a year.. on charge when not using it.. don’t use it every day, but for quick pickups only.. Just how long should the battery last? I was sent a new charger, didn’t help.. it just won’t hold the charge even tho two green lights are solid, but one red light does show up..
ANSWER : How are you charging your battery? Every battery has a memory. If you dont let it die the first come times then charge to full the battery will assume 40% is 100%.

Read Full Q/A … : Domotec Vacuums

Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don’t know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use
ANSWER : If the green light is off, then its time to replace the band. This video shows you how.

Read Full Q/A … : Domotec Vacuums

A friend who bought a multimaster less than a year ago has had his start a loud ‘clattering’, dry, noise, and the gearbox started to get hot.
The output shaft now has about the same amount of slop as the total movement should be. It is one of the quick attach type.
I bought one of the allen key attach type, and have found in the past with various ‘name brand’ tools, drills, angle grinders etc that they usually use a ‘dry’ type grease which soon throws off the necessary parts and they run dry u
ANSWER : Fein is an excellent tool and has an excellent warranty that will be void the moment you open the gearbox. I do not recommend this action. Fein is quick and responsive, especially for a less than one year issue..Farmerbear at FixYa.com

Read Full Q/A … : Domotec Vacuums

We have the water hooked up at the back of machine. there is a spout for the water to come in and fill the ice tray.but is does not. If we turn the water on it fills up the space under the ice basket. I keep getting red light and then the two smal llight one ice and one water come on. We can hear the motor trying to fill the ice try and then lights come on. Please help me this so I can use this product. It did not come with a manual.
ANSWER : The water inlet valve on the back of unit opens when the ice maker needs water. If the valve doesn’t seal good because of sediment or wear it will continue to drip and when the water reaches the ice maker supply tube it will freeze blocking the fill tube.. You can take the water line off the valve and watch to see if it drips.
With the fill tube blocked with ice the water can drip down the back wall or drip into the ice bin or just stop up. You can use a hairdryer to thaw the tube out.

Read Full Q/A … : Domotec Vacuums

Steam doesn’t come out anymore when I pull the trigger. I think the water in the tank is getting hot, but when I pull the trigger, only a little water comes out. No steam
ANSWER : Try putting some white vinegar in the tank to dissolve any hard water deposits. You should use only distilled water in this machine. Don’t try to clean anything with the vinegar in it, but take it outside to run the vinegar through.

Read Full Q/A … : Domotec Vacuums

When you turn on the machine the light goes green,I then switch the lever over on the top to red for a hot drink,the machine makes the noise and you think its going to make your drink but no water comes out,My son brought it for xmas last year and didn’t think to keep the reciept.
thanks lisa
ANSWER : Turn off

Read Full Q/A … : Domotec Vacuums