My dyson dc24 has started spraying dust from the ball.

Dyson Ball DC24 Bagless Upright Vacuum\015 Dyson say I must have been hoovering small dust and that voids the warranty.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If the machine will no longer efficiently pick items up, the filter might be dirty. If after cleaning the filter your vacuum is still not sucking things up, turn your vacuum around and pull the red tab at the bottom of your Dyson out.

Clean the right way

It`s essential to remove all the dust and dirt from your floors before moppng to achieve a barefoot and genuinely clean floor. Dyson vacuums are engineered to provide up to 230AW of powerful suction to remove all the dust in your homes.

The DC24 All Floors is compact and maneuverable, and best suited for small spaces and wood floors. The DC24 All Floors is a good cleaner for a small apartment or office, but it doesn`t have the power to handle a larger space or big areas of carpeting.

Our machines are engineered with six layers of advanced whole machine filtration, which means that we capture 99.97% of microns as small as 0.3 microns. Our fully sealed system keeps dust in the machine, drawing the airflow through all six layers of filtration, expelling cleaner air into your home.

Why is the vacuum is blowing dusty air out of the back? Simple: the bag or canister is full and the vacuum has nowhere to store the dust it is collecting. Empty the canister or bag. If that doesn`t fix it, the vacuum filter needs to be cleaned or changed.

If your Dyson Ball Animal vacuum no longer sucks up dirt, dust, and debris when using the nozzle and its attachments, there may be a clog in the vacuum`s nozzle. Unplug the vacuum and use the Dyson Ball Animal Hose Replacement Guide to remove the vacuum`s hose and check for clogs at the base of the hose.

Dyson invested £2.5 billion in research and development.

While you might feel that this is the reason their products are expensive, you`re highly mistaken. This investment was mainly to accommodate a centre for their 1,200 employees, 22 laboratories, prototyping space, and areas for collaborative work.

The state-of-the-art Robot Cyclone technology in the Dyson vacuum cleaner circulates air at a high speed, resulting in powerful suction. Dirt is collected in the clear plastic basket container; so the suction power remains even if the container is full.

We recommend dusting before vacuuming, this is because dust particles usually get moved around the room when you dust, meaning all your hard work will go to waste. A top tip is to wait at least 2 hours after dusting to get the vacuum out.

Suction power: Air watts are key to picking up as much of the visible and invisible dust from surfaces. Dyson vacuums are powered with a Hyperdymium™ motor, increasing that suction power efficiently.

The filters for Dyson DC24 Multi Floor vacuum are washable and reusable without deformation occurs. You can rinse with clean water and let it completely air dry before reusing them.

We recommend replacing your air purifier filter every 12 months. That`s because over time, filters can get clogged with pollutants, and even let unpleasant odors back into the room.

If you`ve recently remodeled, don`t vacuum up sanding residue or other tiny particles — you`ll need to use a more durable machine (like a shop vac) instead. “Fine dust will clog the filters or bag right away,” says Forte, and then the machine might begin spewing dust back into the air.

To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on. Please note: In normal use, the Brush bar automatically turns off when the machine is upright and automatically turns on when the machine is in the vacuuming position.

Clog located in the vacuum hose

Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.

Depending on your Dyson model, you may be surprised by the amount of dust and debris you`ll find inside it. So, `detach the hose from the wand, then clean its insides using a cloth pushed inside with the help of a broomstick or anything similar. `

Hold the handle of your appliance firmly and gently rotate the filter cage anti-clockwise. Pull down and away from the appliance. Wash the filter cage under a warm, running tap. Leave the filter cage to soak in warm soapy water for 30 minutes.

There`s an additional model category sold by Dyson labeled “Outsize.” This is the most expensive kind of Dyson vacuum, with a price tag of $800 or more. Dyson`s Outsize vacuums offer a bit more suction power and a larger dust bin.

No matter how many people claim that the Dyson Airwrap does not damage hair, the tool is still a heat styling tool. And every time you put heat directly on your hair, there`s a chance that your hair could react badly, especially if it`s already chronically dry or otherwise compromised.

Any claim that a hot tool doesn`t damage hair is a lie. Thankfully, Dyson isn`t lying and claiming the Airwrap won`t damage your hair, but the brand does claim it is less damaging than comparable hot tools. The Airwrap was designed to “measure airflow temperature over 40 times a second.

Counterfeit Dyson machines are very difficult to spot: They appear nearly exactly the same as the genuine Dyson machine: from the logos on the machines to the packaging they are delivered in. Counterfeit Dyson machines even include copies of Dyson`s serial number stickers and Dyson warranty cards.

The cleaner head housing is not washable and should only be wiped over with a damp lint-free cloth. To maintain optimum performance, check and wash your brush bar regularly. Make sure your machine is disconnected from the charger and take care not to touch the trigger.

24dc is a dual purpose battery (this battery can be used for both starting and deep cycling) & the 24dcc is a deep cycle (this battery is just used for deep cycle.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My dyson dc24 has started spraying dust from the ball.

ANSWER : Load of rubbish how come in this video it shows them hoovering powder up with no probs i think there a fault on it like a seal not working properly tell them you wont your money back or you will take them to court..

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball dc24 the brush bar is not turning – Dyson Ball DC24 Bagless Upright Vacuum

ANSWER : Hi its Darran at Dyson.

With the machine switched off, press the re-set switch on the side of the head, making sure you push the button in as far as you can. When you switch the machine back on and lower it into the vacuuming position, the brush bar should start turning.

If this doesn’t rsolve the problem, please contact our Helpline on 0800 298 0298, between the hours of 7am – 10pm, 7 days a week.

Kind regards
Darran
Dyson Customer Service

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

Dyson ball dc24 brush will not rotate – Dyson Ball DC24 Bagless Upright Vacuum

ANSWER : Hi there,

Your DC24 is equipped with a sensor which shuts off the brushbar if something jams it. Once you’ve checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the machine as shown in the video below.

You may also want to refer to our online Support guide:

http://www.dyson.co.uk/support/dc24/dc24-multi-floor/my-machine-is-not-working/my-brushbar-is-not-rotating/stabiliser-check

This should resolve the issue, but if you’d like any further assistance or advice, please call our customer Helpline on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

Dust….dust….dust Hello, I recently bought a house with an older Electrolux Central Vac system. I’m unfamiliar with them, so I’m not sure how to deal with this: I cleaned up some mortar dust with it, and noticed not too long after that when I went into the garage, there was a fog of dust. The hose from the unit is venting into the garage. Is this normal? I have since used it for everyday household cleaning and each time I go back to the garage to a cloud of dust. Is there anything I can

ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=113662&thid=662824
.Dust….dust….dust
.Posted by Kitkatman on Jun 11, 2008
.Hello,
I recently bought a house with an older Electrolux Central Vac system. I’m unfamiliar with them, so I’m not sure how to deal with this: I cleaned up some mortar dust with it, and noticed not too long after that when I went into the garage, there was a fog of dust. The hose from the unit is venting into the garage. Is this normal? I have since used it for everyday household cleaning and each time I go back to the garage to a cloud of dust. Is there anything I can do? Thanks
.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. It sounds to me that the unit you have may have to be vented outside as I am not familiar with this particular unit, or it could very well be that it is missing a filter or the filter you have inside already is shot and is in need of replacement or on some central vacs there are paper filter that go over the cloth type filter. Again, I am not familiar with this older unit but feel free to contact the Electrolux Factory or Manufacturer and give them the model # and the serial # for the unit and they will have a breakdown of if it should be vented and what type of filtration it should be using. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://electrolux.com/ Customer Service 1-800-896-9756
.Electrolux Home Care Products – North America
.P.O. Box 3900 Peoria, IL 61612
.Thanks, Don the Vac Man
Go Ahead. Use Us.
.

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

While using my Dyson a rug got caught and that ratcheting sound started. I removed all signs of strings, etc until the brushes rotated fine but when I started the Dyson the ratcheting started again. I have the DC 14 Animal.

ANSWER : The rattly sound means the drive belt has snapped or the protective clutch has slipped. This needs repair by someone who knows how to repair Dysons officially. Sadly its the kind of model that can’t be done by the owner.

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

HOW TO GET BRUSH OUT OF dYSON DC24 – Dyson Ball DC24 Bagless Upright Vacuum

ANSWER : Hi there,

To remove the brush bar from your DC24, please follow the steps shown in the video below. Any threads, hair or other debris can be removed with scissors, but please take care not to damage any of the bristle tufts.

I hope this helps – if you’d like any further assistance or advice, please give us a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

My dyson seems to have lost its suction therefore is not picking up anything yet i have found that when my dyson is standing upright it has a little more suction but nothing like how it use to work. This has only happend in the last 2 weeks. I sanded a floor & though the sander picked up majority of the dust i did use the dyson to pick up the excess and it is since then that my dyson has not been working to its full potential.

ANSWER : Hi there,
.
.Sorry to hear you’re having a problem with your DC07. You should be able to resolve the issue by following these simple steps: http://www.dyson.co.uk/support/help.asp?article=1940&product=DC07-SY
.
.If you’re still experiencing difficulties, please get in touch with us, free, on 08002980298 (UK), or 1866MYDYSON (US), so we can run through some checks over the phone.
.
.Kind regards,
.
.Jack
.Dyson Customer Service

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum

How to remove the beater bar on a dyson ball – Dyson Ball DC24 Bagless Upright Vacuum

ANSWER : Hi there,

To remove, clean and replace your DC24’s brush bar, please follow the steps shown in the video below.

I hope this helps – if you need any further assistance or advice, please visit www.dyson.com and click ‘Support’, or call our customer Helpline on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Read Full Q/A … : Dyson Ball DC24 Bagless Upright Vacuum