Dyson DC25 All Floors Bagless Upright Vacuum\015 I Cleaned all parts, hose etc, However when I push vaccumme forwaard, it sucks up, but when I pull it backwards everything i just vaccumed comes back out, in a trail/stream of stuff.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If your vacuum is leaving dirt behind, or even spitting dirt back out while cleaning, it`s usually due to a blockage. It sounds like you`re experiencing this from the base of your machine, so we would suggest having a look at this video here, on removing blockage from the cleanerhead.
The cause of this is the carbon dust. The carbon dust eventually becomes too much for the airflow so it gets blocked and the powerful motor is blowing it`s exhaust really powerfully, so the air must go somewhere. The sealed filter is doing well but it becomes too much so it just pops the filter out.
If you find that your machine is turning off intermittently, the filter in your vacuum is most likely full and covering the ventilation system. Remove the filter, then empty and wash it. Allow the filter to dry for at least 24 hours, or until it is completely dry.
Why is the vacuum is blowing dusty air out of the back? Simple: the bag or canister is full and the vacuum has nowhere to store the dust it is collecting. Empty the canister or bag. If that doesn`t fix it, the vacuum filter needs to be cleaned or changed.
Firstly take it outside, as far away from the door and path as you can, or near or into the wheelie bin. Empty the contents into a plastic bag. Dispose in the outside bin. Use a soft brush of any kind and clean the cylinder casing inside and out.
This genuine Dyson vacuum part is the reset switch for the Dyson DC24 and D25 uprights. This switch needs to be activated if you experience a power surge while vacuuming, and your vacuum turns off as a result.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
If all you hear from the vacuum unit is a click at the when you try to start the vacuum motor from inside the house, then the motor in the unit is dead and has to be replaced. A strong odor from the shellac, which coats the copper coil windings, is an indicator that the motor is about to or has burnt out.
The suction control slider is located at the front of the cleaner head. The ball located between the bin and the cleaner head.
The most common cause of loss of suction is that the filters have become blocked. They may require cleaning or replacing. Another cause could be that the vacuum cleaner hose is blocked.
Clog located in the vacuum hose

Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.

If the machine will no longer efficiently pick items up, the filter might be dirty. If after cleaning the filter your vacuum is still not sucking things up, turn your vacuum around and pull the red tab at the bottom of your Dyson out.
Rather than waiting for the canister to fill up all the way, the Vacuum Experts suggest you empty it after every use. If that`s not feasible, “empty the vacuum once it reaches half to two-thirds of the way full as a matter of habit,” the Vacuum Experts blog post recommends.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on.
Reset the machine without the app

The machine allows you to clear your WiFi settings, restoring the machine to the factory default. Press and hold the `Standby ON/OFF` button on the purifier for longer than 20 seconds.

Eventually, the filters will be clogged and the air flow going through the machine will be dramatically reduced. If no more air is going through the product, the air won`t be cleaned anymore.
We recommend replacing your air purifier filter every 12 months. That`s because over time, filters can get clogged with pollutants, and even let unpleasant odors back into the room.
I would not use with filter off. This must be a feature of the newer models. This one blows air even with the filter removed. The suction is reduced by a considerable amount.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
If your Dyson vacuum is pulsing even after cleaning the filter, it may be because the filter is not set correctly or is clogged with debris. To fix this issue, try reseating the filter and cleaning it thoroughly to remove any blockages.
One of the first things to do when your Dyson vacuum cleaner keeps starting and stopping is to empty the bin. It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
One of the first things to do when your Dyson vacuum cleaner keeps starting and stopping is to empty the bin. It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I removed the handle of my Dyson DC24 to vaccum in high areas and now when i try to put the back piece back, it doesn’t click. So when try to vaccum on the floor the handle just comes off.
ANSWER : Hi there,

I’m sorry to hear you’re having difficulty with your DC24. The wand handle should reattach easily to the machine, locking into place with an audible ‘click’. If it doesn’t seem to be doing this, you may want to check you have the handle facing the correct way round, with the red release catch at the front. You may also want to check the wand and hose for any blockages – for guidance on doing this, please follow the steps shown in our Support guide:

http://www.dyson.co.uk/support/dc24/dc24-multi-floor/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/how-to-wash-filters/no/check-wand-and-hose-step-1

This should resolve the issue, but if you’d like any further assistance or advice, please give us a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Dyson curved piece at bottom keeps falling off how to reinstall?
ANSWER : Call me, doug in Riverside cali, pretty handy just rebuilt my stage 3 on my animal. I am incredibly gifted. 951-316-7071

This dyson dc15 is pulling to one side not sure what it could be, also the wheels at the back dont seem to be staying down the are flipping back up when trying to stand it up, can anybody advise what
ANSWER : Look at the guide

Bisell clearview compact dual cyclonic leaves dirty streak trails on the carpet.How do I fix it?
ANSWER : Check this video out

Vacuum picks up some dirt and debris but not all, and spits some back out?
ANSWER : Some blockage at the pickup or in the hose if it uses one—dirt etc being kicked back out is a clear sign of this—-if it has a tube check that first, and if a head with turning brush do not miss looking for a blockage there.

How do I buy a Dyson DC25 manual – Dyson DC25 All Floors Bagless Upright Vacuum

Dyson dc25 power switch wont stay on – Dyson DC25 All Floors Bagless Upright Vacuum
ANSWER : Hi Chett,

I’m sorry to hear you’re having difficulty with your DC25. If the switch doesn’t seem to be working correctly, I’d encourage you to get in touch with us directly as we’d appreciate the opportunity to provide further assistance.

You can reach us on 0800 298 0298 (UK), or 1-866-693-9766 (US). Please have the machine to hand when you call, so one of our advisors can run through some troubleshooting with you.

We’ll look forward to hearing from you.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Poor Suction Heya! So I just picked up a used Dyson, but when I vacuum with it, the suction is pretty weak and it spits all kinds of stuff out the back and into my feet. When I pull the hose I have good suction, but in regular mode it hardly picks up anything. The brushes are spinning, and it eventually will clean an area if I go over it again and again. Maybe a clog somewhere? Please tell me that Dysons have better suction than my $50 Dirt Devil! Thanks!
ANSWER : I recently bought a second hand Dyson DC07. Its suction was poor. I removed all the un-clipable pipe bits and to remove any blockage but it all looked clear. The Final Sponge and hepper filter did have a lot of dust in it and the rotating brush was full of hair but nothing bad.
.
.I eventual gave in to curiosity and removed the three screws in the top or the yellow removable dust collection tube and cyclone bit to see what was in there. The mechanism to release the flap at the bottom of the collection tube does not allow you to remove the lid completely but it does open far enough to get inside. I found the whole top section of the yellow plastic bit blocked by a big plug of compacted dust and a champagne cork. If you are willing to take the risk and have a torx 15 screwdriver handy it that part may be blocked. It did get a bit messy.
.
.If I was going to attempt the same procedure I’d remove the dust collection unit from the vacuum cleaner as I did before, but leave the clear tube attached and the emptying flap firmly closed to reduce the mess from the dust falling out the bottom while cleaning the top part.