Electrolux EL8602A Bagless Upright Vacuum\015 . It is only a fees months old. What happened!\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Check for a plugged hose:

Plugged vacuum hoses are sometimes the reason for a loss in suction. Hoses can get clogged with hair, dust bunnies, string, or anything else that can`t pass through the other end of the hose. Airways inside the machine should be looked at as well. Wherever there is an air passage, check it.

One of the easiest ways to increase vacuum cleaner suction is to empty the dust bag or container. Dust containers need to have enough space for airflow, otherwise, they could get clogged and have less suction power. Regularly check your dust compartment and empty or change it when it`s already 70-80% full.
Possible Causes: The brush roll is blocked. The cleaner might be overheated. The battery is empty (last LED blinks)
Clog located in the vacuum hose

Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.

All vacuum cleaners operate based on air flowing from the opening at the cleaning head or tool, through the vacuum cleaner and the bag and/or filter system and then out the exhaust port. This airflow is created by the vacuum motor, which also may be referred to as the suction motor.
The two main indicators to determine vacuum power performance are water lift and airflow. The water lift is measured in mmH2O, mbar or kPa. It represents the suction force and is the reference parameter for vacuuming liquids and heavy materials. The airflow is measured in m3/h or in l/s.
Check the hoses, filters, and rollers if you have a suction problem. A vacuum that loses suction is pretty useless, but the problem is often nothing more than a clogged roller, hose, or filter. To inspect these parts, unplug your vacuum, then turn it over and see if you can manually spin the roller.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
If your vacuum cleaner keeps turning off, this could be due to the following reasons: Blockages – check the hose and head for any obstructions. Filter – always check your filters, if these are clogged this could be causing the vacuum cleaner to work harder and lose suction power.
Air watts refer to the number of watts used by the vacuum cleaner to carry a unit of air through an opening or nozzle. The higher the air watts, the higher the suction power.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I cleaned out my brush in the bottom front, cleaned out the small tubing going into the canister, and the canister itself. I also changed the filter.I snapped everything back into place, but Since then, it doesn’t seem to have any suction and there seems to be a space between the canister and the bottom of the vacumm where the canister sits. At that area, you can feel air coming out when trying to vacumm and it just doesn’t pick up, it seems to be just blowing stuff around.
ANSWER : You need to really look at it some thing is out of line you shooed not have
.any spaces in the top or bottom
.pull the canister back out and look at the pins that you lined up with the
.top and the canister you might have missed arrows that need to be lined
.up so it fits tightly in its holder
.ive had the same problem with my hover mach5
.
.
.i hope this helps you
.bob

My electrolux oxygen cannister has the “bag change” light on when there is a new bag. The light stays on when the suction power is high (to pick up small particles) and it won’t pick up, but the ight goes off when the suction power is low (to pick up big objects). I changed the hepa filter, cleaned the motor filter and changed bags, but all that didn’t help.
ANSWER : You may have a clog in the hose, and/or the inlet by the brush roll. A clog will turn on that light as well as a full bag.

My filter queen just had the motor rebuilt last year and was basically a brand new unit when I got it back. It is not picking anything up now when I vacuum. The beater bar on the carpet attachment is turning fine and when I take all the attachments off the hose I can feel the suction being created like it should be picking up debris just fine. I have emptied the canister even when it did not have much in it; however, it still will not pick anything up off the carpet. It picks up debris tempo
ANSWER : It sounds as if you have a clog inside the “Power Nozzel”. They mention that there are “no user serviceable parts within the Majestic® Power Nozzle” My advice would be to see if you can see a clog with in reachable distance and try to remove the clog. One way to check for a clog which may work for you is to remove the attachment and shine a flashlight on one of of the attachment and look through the other side and see if you see light, if no light, most likely a clog. Past that you might void the warrenty if you try and open it up the Power Nozzel itself. You may want to ask a Phone service rep about clog removal.

Have ultra vision and have changed filter and foam filter, checked all hoses but still will not pick up. Belt is fine and brush is clean and spinning properly. dirt stays at top of filter instead of falling into canister.
ANSWER : My kids get mine stuck all the time 🙁

Take the vacuum outside then:
Remove the hose at the bottom and see if there is any obstructions. Also shake the hose to make sure there is nothing in there as well or take it out side and make sure you can see light through it.

Let me know if this has helped or if I can help you with anything else,
Thanks

Our problem with our Rainbow E Series is that it has sucked water up and blown it out through the lower part of the hepa filter, making the filter wet and dirty. This had happened before and the repair shop did not see any problems with the machine, so we replaced the filter and were very carful not to overfill the tank and to change the water often. Now it has happened again and ruined another filter. Do you know what could be causing this issue? Can the filter be cleaned or will a new one be
ANSWER :

Thank you for allowing.us to help, please respond with further questions and concerns
..

Spanish speaking.available for all problems
..

Before you leave.feedback, ensure that your concerns and problems are addressed completely with.me.
..

PLEASE do not forget to.award/PROVIDE “POSITIVE” FEEDBACK
.



.

Hello, thank you for sharing your problem with us, I would personally be happy to provide the most accurate and up to date information for you.
.



.

1. There is no reason to waste money on an EXPENSIVE replacement. While some people may like the fact that something that may be brand new may work better, this is not always the case.
.

2. You can easily set the filter out to try as long as there is NO WET ELECTRICAL COMPONENTS, if so, you will be facing electrical damage
.

3. Once you have performed a natural or sun dry on the old filter, ensure to check your unit for anything that may have caused the back clog.
.

4. Back clogs for your model are often times associated with a BUILD UP of dirt and HAIR. YOU may always use pressure air for example at a gas station to flush out the build up.
.

5. Other occasions, users accidently build the vac WRONG causing continual backup and water going where it is NOT suppose to go.
.

6. Please visit me again if your problem persists.
.



.

.


..

Thank you for allowing.us to help, please respond with further questions and concerns
..

Spanish speaking.available for all problems
..

Before you leave.feedback, ensure that your concerns and problems are addressed completely with.me.
..

PLEASE do not forget to.award/PROVIDE “POSITIVE” FEEDBACK

Isn’t picking up lint. Will pick up other things like flecks of paper but will not get any fuzz or fibrous material off any rug no matter what the setting. This is a recent problem. Have owned the vacuum for awhile and never seen this issue before. Is it an easy fix? I’ve cleaned the brush, cleaned out the filters, cleaned the dirt tank. Nothing changed.
ANSWER : Is the brush turning on the bottom of the machine ? If not It could be cloged
up with stuff or the belt could be worn on it and it will turn but as soon as it contacts the floor it will stop turning. The belt is easy to replace by removing screws on the bottom of machine and a plate will come off . The belt can be pulled off and a new one installed by stretching it over the shaft on the motor and one on the brush assembly some may have a cogged wheel. JUST MAKE SURE IT IS UNPLUGED BEFORE DOING THIS

Electrolux twin clean vacuum cleaner. After 5 minutes it keeps of thinking the filters need cleaning (and they don’t). I re charge the
power, and all seems fine and then it goes back to
wanting the filters cleaned. The suction is also
not working to full capacity.
ANSWER : Because the suction is not working fully it feels that the bags must be full and the air cannot be pulled through the bags. It could be due to 1) bags not being of correct quality. The air has to pass through them to allow all the dust to reach there. 2) There being real low suction due to a blockage somewhere. Check and remove he blockage.

HEPA Filter My vacuum came with a sponge over the filter and the directions said I could wash the filter. Do the directions mean to wash the black sponge or the actual filter? Is the sponge part of the filter or is it trash? Filter F27 Dirt Devil Purpose Cleaner for Pets Upright Bagless Vacuum Model #1LY2108-000
ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=618630&thid=730623
.HEPA Filter
.Posted by jenski66 on Jul 02, 2008
.My vacuum came with a sponge over the filter and the directions said I could wash the filter. Do the directions mean to wash the black sponge or the actual filter? Is the sponge part of the filter or is it trash?
Filter F27
Dirt Devil Purpose Cleaner for Pets
Upright Bagless Vacuum
Model #1LY2108-000

.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Typically the top filter of which is the sponge is washable but the HEPA filter is not, it can be brushed off and vacuum off with another vacuum, but the best filtration is to replace the HEPA filter and to wash the sponge filter, if the sponge filter get to bad then replace the sponge filter as well. Or, you can check with your local vacuum cleaner dealer in your area or to contact the manufacturer’s website and or phone #. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

.http://royalvacuums.com/ Customer Service 1-800-321-1134
.Hours are: 8:00 AM to 7:00 PM (EST)
.Thanks, Don the Vac Man
Go Ahead. Use Us.