Kirby Generation 3 Bagged Upright Vacuum\015 My kirby generation 3 wont power on\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
Unlock the Handle Tilt Latch Lever before pulling backwards. Failure to follow this notice could result in damage to the floor. For carrying: Move the Handle Tilt Latch Lever away from the bag to lock the base in place when the unit is lifted off the floor.
Manufacturing Date: 1990 – 1993. The G3 model introduced a new look and feel to the overall Kirby!
– Some vacuums have an in-line thermal fuse (often located between the switch lead and the motor coil). If the fuse is blown it will need to be replaced. – Check your home circuit breaker – it may have tripped. – Some vacuums have a brushroll on/off control.
Vacuum cleaners are fairly simple machines. They need power to be transmitted to the vacuum to create a suction force that lifts debris. So, the usual areas that cause suction loss include the wrong height setting, stuck rollers, a faulty gasket, a broken vacuum belt, a filled bag, or a clogged hose.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
His age is never directly stated, although he is referred to as a “little boy” in the English manual for Kirby`s Dream Land (1992), described as a baby with a projected 200 years until adulthood in the anime, and was referred to as being a “jolly fellow” in Kirby Super Star. Kirby is cheerful and innocent.
Kirby`s Dream Land, released in 1992 for the Game Boy, was the first game in the series.
Kirby vacuum prices are higher than many vacuums found at big-box stores, but that`s because Kirby vacuums are made of durable materials that will last for years. Why replace an inexpensive vacuum over and over again when you can purchase a Kirby vacuum? This complete home cleaning system that will last for a lifetime.
A damaged vacuum hose, clogged motor air filter or bad suction motor can cause the vacuum cleaner to shut off during use. A tripped overload on the vacuum suction motor can shut off the vacuum cleaner during use. If your vacuum has a reset button, push it; if the vacuum seems hot, let it cool off first.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
Besides getting jammed with dirt and debris, the major problem that cordless vacuums face is a weak battery or failing recharger. Some cordless vacuum batteries are easily replaced while others are not and require that the entire unit be replaced.
The problem may lie in your vacuum cleaner`s adapter, charging dock, or battery and the electrical outlet. Try plugging your vacuum cleaner in to another outlet. If it is now working, the problem was in the first outlet that you have used. You should contact a certified electrician if you need to fix that outlet.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

My kirby generation 3 wont come on
ANSWER : Make sure cord is not damaged. Check to see nothing is blocking hose or carpet nozzle(where beater brush is or brush roll). Plug unit in to a receptacle that you know has power going to it. (Lamp you know works when plugged into same. Using hose on front, make sure bag bottom completely attached to exhaust, the hose has a little arm like thing that will depress the safety switch on the front of the unit, and turn on using foot switch at the back of the unit. If these do not work, it could be one of two safety switches, dirt may have fouled or switch may need to be replaced. Authorized Kirby Dealer in your area: Replacement parts, Kirby Distributor, call:....1-800-437-7170.\011\011\011\011\011\011\011\011\011\011\011\011\011\011.United States and Canada

I need a manual for a kirby vac gen #3 – Kirby Generation 3 Bagged Upright Vacuum
ANSWER : Click the link below for the manual It’s a very large .pdf file, so just be patient while it loads;
http://kirby.110mb.com/docs/kirby_sentria_manual.pdf

Kirby Generation 3 Model G3D
ANSWER : Look through THIS article. If you cannot twist the know – you need to take it apart and lubricate.

Rocky

Kirby wont come back on checked outlet its ok
ANSWER : If you are refitting the shampoo tank, you havent turned it far enough. There is a safety switch that must lock

Kirby generation 3 fan
ANSWER : You have to take off the top cover, then the handle pivot. Look down at the back of the armature you will see that it has a flat spot, you use a small vise grips or pliers to hold it, turn the belt pulley to the right if I remember right and turn the pulley off. If it won’t come free, use a couple of flat blade screwdrivers and pry up to pop the fan off. Then put it all back together.

How do I replace the belt on kirby generation 3?
ANSWER : The instruction is HERE with plenty of pictures.

Good luck

Kirby generation 3 won’t vacuum. It runs and
ANSWER : You may have suction but if the belt is worn the roller brush won’t spin and therefore won’t pick up anything. You can get a replacement belt here:

http://vacbelts.xps.convina.com/kirby-301291-belt.htm

Kirby Generation 3 no power…
ANSWER : I don’t believe there are any service manuals online, as Kirby has service centers around the country. There are 3 things in the power string–on/off foot switch, the power cord, and the power assembly that the cord plugs into underneath the bag in the main part of the body. One of the problems the G3 had was where the cord plugged into the body–the assembly was a very thin plastic piece supporting the 2-prong electrical connection. This plastic piece was known for breaking, and was actually recalled back in the 90’s. You can take the cord connection off and look to see if that piece is broken, then you’ll have to take it in, or buy a “switch” as it’s called on ebay or somewhere and replace.