My Oreck vacuum cleane won't turn on

Oreck XL2200 Bagged Upright Vacuum\015 My Oreck vacuum cleaner won’t turn on . It was working fine one day and the next I went to turn it on and it won’t do anything. I checked the outlet and that isn’t the problem.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The Oreck family sold their vacuum cleaner business to private equity investors in 2003, initially American Securities Capital Partners. Ten years later, following Chapter 11 bankruptcy it was purchased by Techtronic Industries.

– Some vacuums have an in-line thermal fuse (often located between the switch lead and the motor coil). If the fuse is blown it will need to be replaced. – Check your home circuit breaker – it may have tripped. – Some vacuums have a brushroll on/off control.

They just won`t hold up and require a lot of maintenance to keep going. Oreck, on the other hand, tends to last folks for decades, and models such as the Forever Oreck are warrantied/guaranteed for life. If you are looking for the best lightweight vacuum that will last Oreck is a great option.

With nearly 50 years as an industry leader in the home cleaning business, Oreck Corporation has earned its reputation for making clean easy. Headquartered in Glenwillow, Ohio, Oreck is also the first and only major vacuum brand to bring customers a limited lifetime warranty.

Oreck XL21 & XL7 Series Exhaust Filter EF4PK 77022-01

This motor filter is located at the back of the powerhead in the Oreck…

Clog located in the vacuum hose

Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.

A strong odor from the shellac that coats the copper coil windings is an indicator that the motor is about to or has burnt out. If the motor is still running, even if it turns on and off by itself as it is heating and cooling, you can still run the motor until it gives up for good.

the vacuum system may be dirty, the pumping line may be restricted or too small in diameter, the pump may be dirty or with too little capacity, the pumping speed may be restricted due to other causes.

VOLTAGE TYPES (VAC / VDC)

This means the fuse can be used in a circuit he voltage maximum operating at this voltage . For example; if your fuse was rated at 250VAC, it could be used in a 250VAC circuit or in a or less lower voltage circuit such as 12VAC, but it must not be used in a circuit operating above 250VAC ie.

Alternatively called the reset switch, the reset button allows devices that utilize it, such as a computer or peripheral to be rebooted. Usually, the button is on the front of the device, next to or near the power button.

If your Roomba® i Series Robot Vacuum is not turning on or is not able to charge, rebooting your robot tends to solve most related issues. To reboot your Roomba: Press and hold the CLEAN button for 20 seconds. After you release the button, the light ring will show a white clockwise swirl while it reboots.

Rinse the filter

Any fine dust remaining in the filter can usually be removed with a gentle rinse under a cold tap – hold the filter under the running water until the water runs clear. You shouldn`t need to use any detergent – just water.

The vacuum cleaner you use to clean your home also needs a regular cleaning. Keeping the filters, hose, attachments, canister and other vacuum parts free of dust and dirt can help your vacuum run more efficiently, so it lasts longer and picks up more debris with every pass over the floor.

The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.

Most pleated filters have a replacement schedule and are considered disposable by manufacturers. Paper filters should never be soaked or rinsed in water. However, some filters are made from a non-woven synthetic material (similar to a dryer sheet) that can be rinsed with water a few times to remove dust.

Besides getting jammed with dirt and debris, the major problem that cordless vacuums face is a weak battery or failing recharger. Some cordless vacuum batteries are easily replaced while others are not and require that the entire unit be replaced.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Infinity Vaccum by Shark, model number NV31COS, will not start. The vacuum was running just fine until it grabbed the edge of a curtain. Turned it off to release the suction. Turned it back on and was working fine. About a minute later the vacuum was making an odd noise. Every 2 seconds or so it would “heave” (lack of a better word) then go away, then come back and so on. Turned the vacuum off and checked for blockage, none that could be seen or felt, and now the vacuum won’t turn. Any suggestio

ANSWER : Carpet brush won’t turn when vac on

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage

ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

My Oreck vacuum cleane won’t turn on

ANSWER : I have an Oreck vacuum. My son used it just earlier today and it worked just fine, then just a little while ago a tried to turn it on to vacuum our bedroom and suddenly it won’t turn on! I tried plugging it into other outlets but it was no use. My husband takes a look at it and first thinks that the switch is out in it. He takes the handle apart and quickly realizes that it is not the switch that is causing the problem. Then he took the base of the vacuum apart, removes the spin brush part and cleans it off, puts it back together, and suddenly it works! He said that when those brushes get real dirty the motor gets clogged, then it just won’t turn on. I’m just happy I married someone who can figure these things out, because even if I knew the problem I’m still no good with a screwdriver, taking things apart and putting them back together again. Hope this works for your Oreck too and it’s running again for you soon.

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

The beater bar on my Dyson won’t turn. The vacuum runs and suctions but the bar won’t turn and the belt is not broke. The beater bar did get a carpet fiber caught and wrapped around it which stopped the bar and I removed the bar to cut the fiber loose and replaced it and now it won’t turn

ANSWER : The belt doesn’t have to be broken to make the vacuum not work correctly. If the belt is stretched the vacuum won’t operate the way it is supposed to. You can get replacement Dyson Belts here:

Dyson Replacement Belts

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

Roomba Discovery My Roomba turns on and moves but the brushes won’t turn. Someone told me that I had forgotten to put in the yellow and black end bearings, but I did. Help, I miss my Roomba
I have a Roomba 530, I have had it for 2 weeks and really loved it. I have followed all the cleaning instructions etc.. Then the Roomba wanted it’s brushes cleaning “please clean Roombas brushes” So thinking that something was stuck I removed and cleaned the brushes, (yellow tabs on and in place by the way)

ANSWER : I read somewhere that you need to clear the software in case there is a glitch. To do this, take the battery out and then, simultaneously hold down the “spot” and “clean” buttons for 30 seconds. Replace battery. This has worked for my Discovery model.

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

The brushes on the Hoover All Terrain Steamvac won’t turn. However, when I try to turn them manually they will turn. So, why won’t they turn when the machine is turned on?

ANSWER : Some vaccums have a belt on the brushes. might need a new one if it does have the belt

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This

ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums

ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Read Full Q/A … : Oreck XL2200 Bagged Upright Vacuum