Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The Cleaning Nozzle is clogged

Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.

A steam mop uses hot water vapor to clean and sanitize hard floors, such as tile, linoleum, and hardwood floors, and other places and surfaces: walls, furniture, textile. It works by heating water in a tank, which is then released in the form of water vapor from the mop head onto the surface.
There is condensation in the stand steamer`s hose

To solve this, lift your stand steamer`s head to straighten the hose vertically and hold your steamer in an upright position: This will allow any condensation and steam to flow again. After this, your stand steamer should steam again.

Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe. For best results, sweep or vacuum your floors prior to cleaning with your steam mop. After use, unplug your steam mop and let it cool before removing the Dirt Grip pads.
Shark Pocket will not make steam

Check that your water tank is full, if you find it is empty, add water. Also check that the tank is free of any cracks or holes that could cause water to leak, and that the tank is properly seated in the device`s housing.

First, attach the mop pad to the mophead, then fill the reservoir with water using the filling flask. Once the steam mop is plugged in, it takes about 20 seconds for the steam to build up, and you`ll hear the mop hissing. During the first use, I found that I had to pump the handle a few times to prime the steam pump.
Description. The Shark® Steam Mop lets you deep-clean your sealed hard floors with no chemicals, providing 99.9% sanitization*. Designed with ease in mind, the Shark® Steam Mop is lightweight and maneuverable, allowing you to clean in tight spaces.
Our testing has found that all steam mops remove stains fairly well, with marginal differences, and are likely slightly better than a regular mop and bucket due to the heat and vapour produced by the steam.
You`ll get a deeper clean with a steam mop because the high temperature of the steam actually sanitizes your floors—something a traditional mop can`t do without the use of chemicals. The power of steam can help break up those stubborn stains that a mop can`t.
“Place the steamer at the top of the garment and gently work your way down,” recommends Sokolowski. For best results, pull down on the bottom of your garment when steaming, ensuring the fabric is taut. This way, as the fibers are steamed, they`re pulled straight and will dry into a smooth, wrinkle-free surface.
Tap the mop firmly on the floor a few times to get it steaming again. My mop is still not steaming. Try running a bit of vinegar through your mop. There may be a mineral build-up from your tap water.
The Shark Floor Steamer, also known as the Euro-Pro Shark Steam Mop, is a device for cleaning tile, wood and other hard surface floors that uses heat to lift off stains. It can also be used on carpet with an extra attachment.
If the device isn`t producing steam, please try the following: Check for any debris or blockages in the head and main body. Empty and refill the tank. Check for any limescale/debris in the tank itself and descale if necessary.
First, attach the mop pad to the mophead, then fill the reservoir with water using the filling flask. Once the steam mop is plugged in, it takes about 20 seconds for the steam to build up, and you`ll hear the mop hissing. During the first use, I found that I had to pump the handle a few times to prime the steam pump.
Tap the mop firmly on the floor a few times to get it steaming again. My mop is still not steaming. Try running a bit of vinegar through your mop. There may be a mineral build-up from your tap water.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of
ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER

Shark Steam Mop – Gray/ Purple Vacuum: shark steam mop has water, but there is no steam….
ANSWER : I tried running vinegar through as you would a coffee pot to get rid of hard water scales. This did not work. Then I noticed that the light behind the shark decal on the front of the machine was going off and on. And sure enough as I moved the cord around the light would come off and on. Looking closer I could see the the heat had melted thru some of the cord.I bought mine at Target before xmas last year, throwing away the sales slip after several months so I guess there is nothing I can do about it.

Shark Steam Mop – Gray/ Purple Vacuum: When washing the shark steam mop pads, can I use a…
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}....
..Hi,
..

Yes, ammonia should not hurt anything as all of the parts are plastic and there is nothing to corrode…
.
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.

Shark Steam Mop – Gray/ Purple Vacuum: I left water in the steam mop and now the steam is…
ANSWER : Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

k

Shark S3501 steam mop will not make steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : I posted this video showing how to clean the heater core of the S3501.

http://youtu.be/S4NglGXVv50

My shark steam mop se200 will not steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

The shark steam mop stopped steaming – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}.. ..Hi,
..
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.
.

My shark steam mop does not steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Try cleaning the heating elements of lime deposits or adding a small amount of salt to the water.