Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.
To prolong the life of your steam mop, we recommend using distilled water in the tank. Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe. For best results, sweep or vacuum your floors prior to cleaning with your steam mop.
Heating Element. A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
First, attach the mop pad to the mophead, then fill the reservoir with water using the filling flask. Once the steam mop is plugged in, it takes about 20 seconds for the steam to build up, and you`ll hear the mop hissing. During the first use, I found that I had to pump the handle a few times to prime the steam pump.
A steam mop uses hot water vapor to clean and sanitize hard floors, such as tile, linoleum, and hardwood floors, and other places and surfaces: walls, furniture, textile. It works by heating water in a tank, which is then released in the form of water vapor from the mop head onto the surface.
Yes. I only use water in the steam tank. The mop does come with a separate handle that attaches to the mop head so you can use the same head without any steam. There is a refillable spray bottle that comes with a cleaning solution to use on hard floors with the no steam version of the mop.
What Should I Use? Good quality tap water. If you don`t have issues with hard water stains and buildup, your tap water is good.
Fix 1: Clear Download Cache. Fix 2: Update the Date and Time on Your Computer. Fix 3: Update Device Graphics Driver. Fix 4: Check File System for Your Hard Drive.
Tap the mop firmly on the floor a few times to get it steaming again. My mop is still not steaming. Try running a bit of vinegar through your mop. There may be a mineral build-up from your tap water.
First, attach the mop pad to the mophead, then fill the reservoir with water using the filling flask. Once the steam mop is plugged in, it takes about 20 seconds for the steam to build up, and you`ll hear the mop hissing. During the first use, I found that I had to pump the handle a few times to prime the steam pump.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of
ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER

Shark Steam Mop – Gray/ Purple Vacuum: When washing the shark steam mop pads, can I use a…
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}....
..Hi,
..

Yes, ammonia should not hurt anything as all of the parts are plastic and there is nothing to corrode…
.
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.

Shark Steam Mop – Gray/ Purple Vacuum: shark steam mop has water, but there is no steam….
ANSWER : I tried running vinegar through as you would a coffee pot to get rid of hard water scales. This did not work. Then I noticed that the light behind the shark decal on the front of the machine was going off and on. And sure enough as I moved the cord around the light would come off and on. Looking closer I could see the the heat had melted thru some of the cord.I bought mine at Target before xmas last year, throwing away the sales slip after several months so I guess there is nothing I can do about it.

Kenwood Steam mop
ANSWER : The Manufacturer suggests you clean the hose by removing the water tank dammed if u can get it off though.

Shark S3501 steam mop will not make steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : I posted this video showing how to clean the heater core of the S3501.

http://youtu.be/S4NglGXVv50

When i attached the mop head and begin to mop, water comes leaking out of the unit. I have tried different mop heads and it is doing the same with all. is this a common problem with the shark? i’ve owned it less than a year.
ANSWER :

.
.
.

Hi,

Here.is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it.may not be getting steam to the head…

Euro-Pro.Shark Steam Mop Problem

Here.also is a link to get any of the Shark.Manuals.that you need.

heatman101

The shark steam mop stopped steaming – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}.. ..Hi,
..
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.
.

My shark steam mop does not steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Try cleaning the heating elements of lime deposits or adding a small amount of salt to the water.