Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne\015 Belt on my electrolux 2 in 1 stick vaccuum is lose and will not turn the brushes. Can not find a belt anywhere.\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Inside of the Electrolux Ergorapido vacuum is a 10.8V lithium ion battery. Although this is at the lower end of the Ergorapido line, the battery is able to charge fully in about 4 hours and offers a run time up to 21 minutes.
Electrolux Ergorapido Stick Cleaner Lightweight Cordless Vacuum with LED Nozzle Lights and Turbo Battery Power, for Carpets and Hard Floors, in, Satin White.
The device is not correctly positioned in the charging station. The charging plug is not connected. Incorrect suction cup connected or no suction cup connected (some models) To protect the battery and electronics, the charging function is deactivated if the ambient temperature is below 5 ° C or above 35 ° C.
The problem may lie in your vacuum cleaner`s adapter, charging dock, or battery and the electrical outlet. Try plugging your vacuum cleaner in to another outlet. If it is now working, the problem was in the first outlet that you have used. You should contact a certified electrician if you need to fix that outlet.
All cordless vacuums have limited battery life and need to be recharged. On average, you can expect a cordless vacuums` battery to last between 15 to 40 minutes, which is hopefully all it takes to clean your floors or furniture. Once the battery dies, expect to charge it anywhere from 2 to 16 hours.
Their batteries typically last 30 to 40 minutes on a full charge, enough to clean a room or two but unlikely to tackle your whole home top to bottom. Cordless stick vacuums also have a shorter life expectancy than good plug-in vacuums. For most people, a cordless stick vac should be a sidekick to a plug-in vacuum.
Founded in Sweden in 1919 by entrepreneur Axel Wenner-Gren, Electrolux has shaped living for the better for 100 years by reinventing what great taste, care and wellbeing experiences for our consumers.
If the vacuum cleaner stops suddenly, the filters should be checked to make sure that they are not blocked or that they require changing. This applies to both bagged and bagless models. Also check if the nozzle or hose are blocked.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
Loose connections will cause your vacuum cleaner to lose suction. Make sure that the dust container, the hose, the tube and the brush are all attached properly. If the problem continues, your vacuum cleaner might have a technical problem. If you suspect this to be the case, contact an authorised service agent.
Cordless vacuums, as the name suggests, rely on a battery for power instead of plugging into the wall. Typically, they charge via a dock or plug-in system.
Besides getting jammed with dirt and debris, the major problem that cordless vacuums face is a weak battery or failing recharger. Some cordless vacuum batteries are easily replaced while others are not and require that the entire unit be replaced.
If it is a lithium ion battery then yes it can stay plugged in all the time. But if it is a nickel metal hydride then it should be run down, charged fully and then unplugged. Lithium batteries do not get a memory so they can be charged no matter what the state of charge is.
Rather than waiting for the canister to fill up all the way, the Vacuum Experts suggest you empty it after every use. If that`s not feasible, “empty the vacuum once it reaches half to two-thirds of the way full as a matter of habit,” the Vacuum Experts blog post recommends.
The BMS doesn`t only consist of the actual battery but also the circuitry and other components; together, they ensure the right range of voltage and current reaches the battery for a duration of time. So, in that respect, you can`t overcharge your handphone or vacuum cleaner.
A vacuum cleaner can run continuously for 30 – 60 min each time. The vacuum cleaner has no suction power. For example, a hair cannot be sucked up.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
Made with careful craftsmanship and upgraded performance modeled after luxury appliances, Electrolux appliances offer a similar experience to high-end appliances without the high-cost markup.
Professional test companies regularly rank Electrolux as a top brand for laundry care; that is, they consider it the brand with the best cleaning ability with a gentle-on-clothes wash cycle. You can get a stackable washer and dryer from Samsung or Electrolux.
Avoid Flammable Materials
When using the vacuum cleaner, avoid cleaning flammable or toxic materials. As vacuum cleaner runs on electricity, cleaning flammable or toxic material is likely to cause a fire. Before you start vacuuming, make sure you check the area to avoid accidents.
If your vacuum cleaner keeps turning off, this could be due to the following reasons: Blockages – check the hose and head for any obstructions. Filter – always check your filters, if these are clogged this could be causing the vacuum cleaner to work harder and lose suction power.
Possible Failures and Troubleshooting
Other reasons can be a faulty timer or start switch, a defective motor, or a problem with the main control board which may have shorted. If your Electrolux washing machine is not spinning this could be related to a kinked or damaged drain hose or the drain hose connection.
If all you hear from the vacuum unit is a click at the when you try to start the vacuum motor from inside the house, then the motor in the unit is dead and has to be replaced. A strong odor from the shellac, which coats the copper coil windings, is an indicator that the motor is about to or has burnt out.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
ANSWER : The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
Need a belt for Pronto 2 in 1 stick vacuum.
ANSWER : Your not gonna find a belt because the belts on these units are not designed to be replaced by the consumer and would need to go to a service station
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
Windtunnel belt I have a new Hoover Windtunnel canister. The belt keeps coming off. It happened a couple weeks ago (several times after putting the belt back on) so I assumed I might need a new belt as it might have dried out at the store. I ordered new belts and today I used it for about an hour and the belt came off again, twice. There doesn’t seem to be anything to hold the belt on the stem as it seems to slip off. I have tried it centered, to the left and to the right….can you help. I am v
ANSWER : I’ve successfully used a compatible belt – Royal 104425001 .It’s still new, but for the time being at least – it works.
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
Hoover WindTunnel Self-Propelled V Belt
ANSWER : I had this same problem with the V belt on my Hoover Vaccuum..
.There are three (3) basic things that will cause the brush roll not to spin..
.1. When handle is upright, brush roll is OFF..2. When switch is set for HARD surface, brush roll is OFF..3. Broken/worn FLAT belt or V Belt, brush roll will not spin.
.
.I noticed that the brush roll was not spinning when my vacuum was set for CARPET. After removing the cover I noticed that the V belt was loose, I thought the belt was worn so I purchased a correct replacement belt and installed it, but the new belt was also loose and when I turned the large flat belt pulley it did not turn the V belt pulley at the same time..
.I double checked the surface setting and I had the vacuum switch set for carpet, but still when I released the handle out of the upright position the brush roll would still not spin..
.My aggravation finally led me to this posting on FixYa’s website..
.The first thing I did was checked the screw to the left of the V belt as suggested by ejmjr5 and this did nothing to solve the problem or create more tension on the V belt, even when the upright handle was not in the upright position..
.After playing around with the surface setting control switch/nob I notice that when I moved the switch out of the HARD surface setting and over to CARPET, I had thought that the switch was set for CARPET as it visually appeared, but I was not pushing the switch over hard enough to click it into the CARPET setting mode..
.VOILA, the brush roll now spins correctly even though the V belt seams to be too loose for the pulley..
.You really have to force the switch into the CARPET setting. Be sure that you hear the switch/nob click into place..
.Now you can effectively clean up after that hangover of a party!.
.Burp!
.There are three (3) basic things that will cause the brush roll not to spin..
.1. When handle is upright, brush roll is OFF..2. When switch is set for HARD surface, brush roll is OFF..3. Broken/worn FLAT belt or V Belt, brush roll will not spin.
.
.I noticed that the brush roll was not spinning when my vacuum was set for CARPET. After removing the cover I noticed that the V belt was loose, I thought the belt was worn so I purchased a correct replacement belt and installed it, but the new belt was also loose and when I turned the large flat belt pulley it did not turn the V belt pulley at the same time..
.I double checked the surface setting and I had the vacuum switch set for carpet, but still when I released the handle out of the upright position the brush roll would still not spin..
.My aggravation finally led me to this posting on FixYa’s website..
.The first thing I did was checked the screw to the left of the V belt as suggested by ejmjr5 and this did nothing to solve the problem or create more tension on the V belt, even when the upright handle was not in the upright position..
.After playing around with the surface setting control switch/nob I notice that when I moved the switch out of the HARD surface setting and over to CARPET, I had thought that the switch was set for CARPET as it visually appeared, but I was not pushing the switch over hard enough to click it into the CARPET setting mode..
.VOILA, the brush roll now spins correctly even though the V belt seams to be too loose for the pulley..
.You really have to force the switch into the CARPET setting. Be sure that you hear the switch/nob click into place..
.Now you can effectively clean up after that hangover of a party!.
.Burp!
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
OUR DYSON 07 SWEEPER HAS VERY LITTLE Vacuum, have cleaned all filters and hoses, on line troubleshooting has said to check soleplate being on correctly, we have done this, still does not have good vacuum, belts are covered by a housing, the video that shows the changing of the belt is not the same, I need to know how to remove the cover to check both belts and any help in gaining the vacuum
ANSWER : This video shows you everything you need to know
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
Clogged vacuum Rather stupidly, my boyfriend 1) were vacuuming without a bag and 2) vacuumed up a big piece of cotton from a sofa cushion. And now it’s making a horrible noise and I see it vibrating where the tube connects to the machine. When you look inside there’s a white thing sticking out but it looks like it’s part of the vacuum. If it’s a clog, how do you fix it? I tried unscrewing the tray the bag sits in but it won’t budge.
ANSWER : You can start by taking off the bottom plate or top cover, which ever comes off, that is where the inlet starts going in and hopefully the clog is there. Could be in the hose also. But without the complete model number I can’t look it up to see a picture of it.
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Read Full Q/A … : Electrolux Pronto 2-In-1 Stick/Hand Vacuum – Cayenne
