Vacuums\015 Does anyone out there have experience of a commercial carpet cleaner called the Chemspec 5-way soil extractor? We have received two of these (model 1012) for service and repair, but have no information whatsoever about them. Any information would be welcome. Owners Manual and exploded diagrams would be perfect!\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
The first step before starting to vacuum should always be to check the filters and recovery bag. If the bag is anywhere near full, it should be changed before starting your job. A typical vacuum with a bag that is over 50% full can lose up to 80% of its vacuuming performance.
One of the most common reasons for carpets remaining dirty after being cleaned is mold in the padding. Mold can cause staining and odors that are difficult to remove.
For synthetic carpets: Mix ¼ teaspoon of a translucent liquid dishwashing detergent, such as Dawn or Joy, into one cup of lukewarm water. For natural fiber carpets: Mix one teaspoon of translucent liquid dishwashing detergent, such as Dawn or Joy, into 1 cup of lukewarm water.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.I hope this helped
.Generic problem for all Vacuums
.I own a self-propelled Hoover
.Posted by gohornsgo on July 17, 2008
.I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the HEPA filter on this model (*this model uses a vacuum cleaner bag also).
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to clean the HEPA filter is to take it outside and use a blower over the trash can and blow off the dust and dirt, or use things like an old paint brush and brush it off, or you can vacuum it off with another canister vacuum or shop vac if you have an extra one. For the best filtration is to replace it, there fore the air flow will catch most of the dust and dirt and then you would have to watch how fast it gets dirty and then do the maintenance.
.So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. – 7 p.m. EST
.Thanks, Don the Vac Man
Go Ahead. Use Us.
I would be glad to send that. But, you never Mention the Model Number and there are Various Models introduced by Hoover.
Let me know the Manual and within Few Minutes, i would be able to send you one more email which would have the Manual Details.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ‘ Fixya ‘ and have a nice day!!