Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If you are still having problems with the suction on your Dyson vacuum after cleaning the filters then make sure the bin is empty remove your filters and quickly test the suction from the handle it should take no more than 5 seconds of running to do this. Removing the filters rules out any problems with the filters.
Within the 3.5kg machine is 262AW suction power1, to ensure no loss of suction. HEPA filtration traps 99.99% of particles down to 0.1 microns in size2, for scientific proof of a deep clean. Our latest vacuum also includes a single-button power control – removing the need to hold a trigger as you clean.
Dyson Cinetic Big Ball Absolute vacuum

No loss of suction. No bags to buy. Ball™ technology for easy steering.

The DC08 was a new cylinder revision, released in 2002, incorporating the Dyson Root Cyclone technology found on the DC07. The DC08 was the replacement for the DC05.
The suction control slider is located at the front of the cleaner head. The ball located between the bin and the cleaner head.
What is a Good Suction Power for a Vacuum Cleaner? An upright cordless vacuum cleaner should have at least 100 air watts to effectively clean a variety of floor surfaces, with the best Samsung vacuum cleaner reaching up to 210W*.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
Dyson was designed and patented by a British, had it made in Malaysia (Johor Bahru), – as it is cheaper to make here.
You`ll find it on your machine, on a label that looks like this. Example: 123-CA-A12345 or AB1-CA-A123456. First two fields are required. Example: 123-CA-A12345 or AB1-CA-A123456.
Gravity and friction are the two main forces that make vacuum suction work. While gravity pulls molecules in the air toward the earth, creating an atmospheric pressure, the suction cup and vacuum pump cause a pressure difference, attaching both surfaces.
It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening. Make sure there`s no dirt lodged in the top part of the bin.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening. Make sure there`s no dirt lodged in the top part of the bin.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

No suction on my Dyson canister vacuum. – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hey,
I see this problem is more frequent..
I’m guessing your dyson ‘sounds’ blocked.
See my solution:
http://www.fixya.com/support/t4547920-loss_suction
This fixed mine right up.
It was not working well at ALL, so i opened it up, cleaned it all, and now it’s sucking like it was new.

GL!

Loss of suction in dyson dc08 – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi there,

If your DC08 doesn’t seem to be picking up as well as usual, there may be a blockage in the machine. The filter may also need a wash.

The easiest way to locate and remove any blockages is to follow the steps shown in our online support guide:

http://support.dyson.co.uk/support/dc08/dc08-standard/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/check-the-floor-tool

In normal use, the filter needs to be washed at least once every 3-6 months, as shown in the video below. Use cold water without detergent, and allow at least 12 hours for the filter to dry completely before replacing it.

This should resolve the issue, but if you’d like any further assistance or advice, please call us on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

How do I open my dyson cylinder – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi its Darran at Dyson.

If you are referring to the cyclone top and bin assembly, once removed from the machine, there is a button at the base of the handle that has Dyson written on it that you press and pull the cyclone top and bin apart to empty it.

If you need any further help or advice, please try the Support section on our website at www.dyson.com.

Kind regards
Darran
Dyson Customer Service

How do i clean all the dyson dc08 – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi its Darran at Dyson.

A full blockage procedure can be found in your user guide or on our website at www.dyson.co.uk/support.

I hope that you find this useful and should you require any further assistance with your DC08, please contact our Helpline on 0800 298 0298.

Kind regards
Darran
Dyson Customer Service

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Dyson vacuum suction loss – Dyson DC11 All Floors Bagless Canister Cyclonic Vacuum
ANSWER : Clean it out
check all the filters
I think it has a foam filter as well as the filterless design
clean and lubricate the motor

make sure it is not leaking and sucking in air from somewhere else

I had the vacuum cleaner question about the canister and the wand/powerhead… the Kenmore Progressive Vacuum canister model 116.25812 and the canister not powering off without unplugging the vacuum. The solution I received that they both run on their own switch so it is normal makes sense. However, is there a power switch on the canister anywhere? The only way for the canister to be turned off is by unplugging it. Any ideas? One would think there would be a switch. I am new to fixya and hope
ANSWER : Hi. On some models, one switch controls all of the power. Your issue, which is no working switch is almost certainly a blown triac on the circuit board in the canister – kenmore part number KC86WBZRZ000

Looks like a common fault with this particular model judging by the number of complaints on the web.
.
.Take it to your local vacuum repair shop and they should be able to fix it for a nominal fee.

Dyson brush replacement – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi there,

I’m not sure which brush you’re referring to, but you can order replacement parts and additional accessories for your DC08 directly from our online store:

http://www.dyson.co.uk/store/spares.asp

If you’d prefer to place an order over the phone, or to consult with one of our advisors before making a purchase, please call us free on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com