Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum\015 Seems to be working Ok but seems to have gotten a lot louder than it used to be. A high piched whine.\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If the cleaner becomes noisy or starts vibrating, it may be because some debris has got tangled around the brush roll or agitator situated in the bottom of the cleaner.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
.Dusty smell
.Posted by chekle on May 23, 2008
.I buy loads of Hoovers and always same problem. When I Hoover its a dusty smell and it stays around bag not full and check filter the Hoover is ok f couple days then this happens.
.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Hoover F5881-900 Vacuum. It sounds to me that if you have a clean bag and filter, it sounds like you have dust in the motor section and it needs to be cleaned and or take a good blower and blow out the dirt or you may have a clog or dirt build up in the suction line and that might be causing the dusty smell. Please feel free to contact your local vacuum cleaner dealer in your area or call the Hoover factory and ask for tech support. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. – 7 p.m. EST
.Thanks, Don the Vac Man
Go Ahead. Use Us.
.
.42272172