Oreck Super-Deluxe BB870AD Bagged Canister Vacuum\015 The plug on the vaccum is all freyed and we need to replace it with a\302\240 new plug. How do I get the old one out and how do I put the new one in?\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Canister vacuums separate the motor and dirt container from the handle and (power) head. A hose connects the handle and head to a canister which houses the motor and dirt container. The choice of canister vs. upright vacuums depends heavily upon your usage, personal preference, and budget.
A canister vacuum consists of a wheeled body that is attached to a vacuum wand and power head via a flexible plastic hose. The canister portion of the vacuum contains the main motor, filter, and any dust bags; depending on the model, the power head may also contain a smaller motor.
Oreck Vacuum bags available for all Oreck upright and canister vacuums. Oreck XL is one of the most popular Oreck vacuum cleaners but there are two different types of bags that fit XL models (with bag dock or without bag dock) so it is important to use your model number to determine the correct bags for your machine.
The better the filtration, the fewer allergens escape back into your home. Bagged vacuums often have HEPA-rated bags, replaceable exhaust filters or both. Bagless canisters usually have permanent, washable filters, some with HEPA ratings.
Vacuum cleaners use an electric motor that spins a fan, sucking in air – and any small particles caught up in it – and pushing it out the other side, into a bag or a canister, to create the negative pressure.
Auto vacuum pumps for brakes and car vacuum canisters are a great way to add needed vacuum to power your vehicle`s accessories such as a brake booster, headlight doors, wipers, and HVAC systems in older vehicles.
Canister vacuums tend to have more powerful suction. They can be extended to any length, which makes them ideal for reaching up high or below furniture. They`re generally lighter than upright vacuums, but they`re also more difficult to store due to the way they`re designed.
canister (n.)

late 15c., “basket,” from Latin canistrum “wicker basket” for bread, fruit, flowers, etc., from Greek kanystron “basket made from reed,” from kanna (see cane (n.)). It came to mean “small metal receptacle” (1711) through influence of unrelated can (n.).

They just won`t hold up and require a lot of maintenance to keep going. Oreck, on the other hand, tends to last folks for decades, and models such as the Forever Oreck are warrantied/guaranteed for life. If you are looking for the best lightweight vacuum that will last Oreck is a great option.
Description. The Oreck HEPA air purifier reduces VOCs from the air that passes through the filter.
“You don`t need a HEPA filter to stop dust mite, and pollen particles, as they are relatively huge. Any good vacuum cleaner should stop cat hair and dander.” Animal hair will be picked up by conventional vacuums, even without a HEPA filter.
Compared to an upright vacuum, canisters have these other advantages: They are typically lighter in weight and easier to use. Canisters tend to be quieter than upright models. The housing is mounted on wheels that is easy to pull across floors.
Compared to an upright vacuum, canisters have these other advantages: They are typically lighter in weight and easier to use. Canisters tend to be quieter than upright models. The housing is mounted on wheels that is easy to pull across floors.
The Benefits of Canister Vacuums

The hose makes it easy to clean areas like stairs, underneath furniture and on higher areas likes blinds, drapes, and upholstery. In cramped areas, they are ideal because you can clean by just moving the wand instead of the entire machine.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I had the vacuum cleaner question about the canister and the wand/powerhead… the Kenmore Progressive Vacuum canister model 116.25812 and the canister not powering off without unplugging the vacuum. The solution I received that they both run on their own switch so it is normal makes sense. However, is there a power switch on the canister anywhere? The only way for the canister to be turned off is by unplugging it. Any ideas? One would think there would be a switch. I am new to fixya and hope
ANSWER : Hi. On some models, one switch controls all of the power. Your issue, which is no working switch is almost certainly a blown triac on the circuit board in the canister – kenmore part number KC86WBZRZ000

Looks like a common fault with this particular model judging by the number of complaints on the web.
.
.Take it to your local vacuum repair shop and they should be able to fix it for a nominal fee.

When we turn on the vacuum, the canister falls open. The clips holding the canister in place do not seem to hold the canister tightly which I’m sure that it did in the past. The clips do not look bent, but every time we turn on the vacuum the intense pressure blows the canister open only remaining attached the the rest of the vacuum by one clip
ANSWER : Check filter and make sure it is kept clean at regular intervals. Possibly worn out clip retainers on cannister side due to excessive pressure build up. Do not force closure unless pressure is back to normal. May crack cannister or damage unit beyond repair.

I cleaned out my brush in the bottom front, cleaned out the small tubing going into the canister, and the canister itself. I also changed the filter.I snapped everything back into place, but Since then, it doesn’t seem to have any suction and there seems to be a space between the canister and the bottom of the vacumm where the canister sits. At that area, you can feel air coming out when trying to vacumm and it just doesn’t pick up, it seems to be just blowing stuff around.
ANSWER : You need to really look at it some thing is out of line you shooed not have
.any spaces in the top or bottom
.pull the canister back out and look at the pins that you lined up with the
.top and the canister you might have missed arrows that need to be lined
.up so it fits tightly in its holder
.ive had the same problem with my hover mach5
.
.
.i hope this helps you
.bob

Hoover Uh30010com the hose on the canister does not stay lock (it keeps poping out). I heard great reviews on this vacuum but I am so dispointed with the canister I am ready to return it to the store, I think it is a waste of money if you can’t use the canister… I cannot believe I did not find reviews on the canister.
ANSWER : You can take it back. they will return it they know this happens all the time. If you like canistar vacs you should get a tristar. they are the best! call me for more info 866-635-9254 John

Kenmore progressive canister bad connection from hose to canister
ANSWER : It could be, the female part of the connector is stretched open. You can usually insert something, like a dart, between the sleeve and the holder, to tighten it. If you paid with Pay Pal, see about getting your money back.

My kenmore progressive canister vacuum turns on only if the hose is attached to the floorwand. It seems that the canister motor is not working because I can’t hear anything coming from the caniste
ANSWER : If the floor wand is powered, there may be an electrical connection that is broken when the wand is disconnected. This is part of the design, not necessarily a fault

Oreck canister bb280d
ANSWER : If the plug is “frayed” that’s one thing. If it’s “freyed” or fried or fired, you got me!

How to clean out an oreck canister vacuum from bedbugs
ANSWER : You can buy a spray for killing fleas in carpets, either from hardware store or vet. I suggest you try spraying inside vacuum.