Nilfisk Family Vac Bagged Canister Vacuum\015 Our new nilfisk quickstar vacuumes keep bursting bags . The gd1010 series we use take the same bags with no problem, eliminating the posibility of a bad batch of bags.\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
A benefit of vacuum cleaner bags is that there is minimal contact with the dust and allergens. Just slip out the old bag and throw it away. No-fuss and no mess. Bagged vacuum cleaners also tend to hold a couple of pounds of dirt and debris and tend to better at deep cleaning.
No need to worry about keeping bags on hand or where to find more. There is no extra expense for buying bags. If your bagless vacuum has a clear cylinder or tray, it`s cool to actually see all of the dust and dirt particles swirling around in the dust cylinder under high pressure.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)
.Detach the hose, turn vacuum on. If it runs, place palm of hand against inport hole. If it shuts off the problem is with either the control valve setting or the control valve assembly itself.
.For cvs, turn dial on top of vacuum all the way to the largest dot, and try above test again. If that doesn’t work, then it’s the CVA. It needs to be cleaned or replaced, which is an in shop job. Fro repair, take it to the nearest Aerus Electrolux store. I recommend a full clean and service to remove any dust/dirt from the motor, fan assembly, and other internal parts.
.Another problem, which relates to the dial setting, is that fine dust will quickly clog the pores of the bag, resulting in the machine “thinking” the bag is full. Turning the dial to the proper setting helps get the bag fuller. The middle setting is the normal setting, and is for areas without fine dust and sand.
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
.Disconnect hose. Turn machine on and place hand over intake. If it shuts off immediately, first try turning dial on top of machine so largest dot matches up with arrow. Turn on and place hand over intake again. If it still shuts off immediately, the “control valve assembly” is worn or broken and needs replaced. Don’t try this yourself.
.Take your complete machine to the nearest authorized Aerus Electrolux shop, or call and ask someone to pick it up. There’s no extra fee for this, or delivery upon repair.
.The repair/replacement should include a complete cleaning of your vacuum in the labor, but ask the service manager to be sure.
.The shop nearest you can be found by typing your zip code into the indicated space on the site listed below.