How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
We have brought the Bernina in, set it up, oiled it as specified in the manual, with the original sewing machine oil. We have correctly threaded the machine and the bobbin thread is up.
When we press on the pedal to sew, the machine gets electricity and buzzes
From what you describe there can be only 2 causes…Either the machine is still stuck ..and the motor buzzes cause it can not spin it ..and in this case it needs to be oiled more..and be spun by hand until it moves well and free…and after that it will work ..or during the storage ..from condense or so ..the motor is stuck ..and needs to be checked…In this second case ..it probably need to be oiled too (the motor ) ..and the coils changed..
Have a nice day ..!
Sorry about the catagory…but you do not have sewing machine on list.
.I have this machine. I use it for my heavy sewing, as it will go through anything. I would be happy to copy the manual and send it to you for copy costs. Just let me know. I would love to know what knowledge you have gained about this machine. It does not appear to be an easy machine to find info on, may not have produced a lot? I had no idea it was not a European produced machine.
1st: Sewed one inch OK; moved fabric and it stopped sewing, motor made thudding noise. When push-button (NOT pedal) is used, gives error E6,
consistent with motor noise.
2d: In order to check threading had to manually PULL bobbin case toward me or it was UNDER needle plate. Cleaned a fair amount of dust out. Reinstalled bobbin, etc., per manual, rethreaded.
3rd: Will sew 2-3 stitches, then packs up again just like in 1st instance above. Have st
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
You don’t say what kind of machine or how old it might be. Many of the newer manufacturers tell the user to NOT oil their machine of if it is permissible such as on Janome, the only place to oil is in the bobbin race. Even then only one drop of oil.
If you don’t know when the last time *********** had the machine serviced, I would spend a few dollars and have it cleaned, lubed and checked by a professional, especially if the machine has been sitting for some time.
On old school machines (black and gold types) there were several oil ports but even then only one drop was needed.