Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum\015 I have a brand new bissell proheat. Used it today for the first time. Everything seemed to work however after I spray dn go back over the carpet to pick up the dirty water I am seeing wet pet hair back on the carpet in clumps. Also turned it off and placed it on the kitchen floor to troubleshoot and dirty water was coming out. This is a new proheat, why is it not picking up the dirty water and not letting it remain in the machine?\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
1-8 of 8 Answers. No. It uses the solution to clean but does not suck it up.
Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process. HeatWave Technology means that the heat that is generated by the motor gets redirected to underneath the water tank.
The BISSELL ProHeat 2X Revolution Pet Pro Carpet Cleaner is a powerful, lightweight and easy to manoeuvre carpet cleaner that achieves professional results and the powerful suction helps carpets dry in 30 minutes.
Additionally, the ProHeat 2X® Revolution® Pet Pro Plus carpet cleaner comes with 3 different cleaning modes; MAX Clean Mode to remove embedded dirt, stains and allergens, Deep Clean Mode for tough stains and spills, and Express Clean Mode to dry your carpets in about 30 minutes.
This machine uses HeatWave Technology™ which helps maintain consistent water temperature throughout the cleaning process by redirecting the heat of the motor to help maintain the temperature of the water.
Hot water loosens and softens dirt more quickly, making it easier to remove, and it also helps to kill bacteria. That`s why we recommend filling up your carpet cleaner`s tank with warm water. Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process.
To start, first make sure your machine is off and unplugged. Next, remove your dirty water tank by pressing down on the colored tank handle. To empty the tank pull up on the rubber tab and pour out the dirty water. Fill the dirty tank with clean water and shake gently to rinse the inside.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.
Pet hair and dirty water back on carpet
If you have followed the instructions.And your not happy i would return it.Get a repacement.
The cleaner/water solution dispenses into the carpet, cleans it, pulls out the pet hair, but no dirty water goes into the dirty water reservoir! is all this dirty water going into my carpet?
The pet hair may be clogging the water return inlet I suugest you clean the bushes and inlet as well
My carpet cleaner (bissell proheat plus) is not steaming, dispensing cleaner. Seems like there’s a little thingy that should be spinning or turning….. When I work a small area of carpet, it just leaves behind dry blobs of carpet gunk like pet hair. I had to use a carpet sweeper to clean up. FYI – I filled the cleaning fluid container and after trying to clean the carpet, it did empty out but the carpet isn’t wet. Any tips? The manual doesn’t help.
I have a Bissel 9300-C 0714 BC Carpet Shampooer. It was working great and all of a sudden it stopped working. It still sucks up dirty water but it does not spray water onto the carpet. I can get it to spray water through the smallest hand attatchment but not through the large hand held piece on the base of the machine. I really hope you can help me, I am a dog groomer and I really need my machine to work properly. I can get it to spray water out of the smallest hand attatchment but
that’s all t
The spray jet has become clogged from the soap…. just clean it out. same thing happened to my attachment.
DIRTY WATER THE FRESH WATER AND SOLUTION COMES OUTON TO THE CARPET, BUT NO DIRTY WATER IS COMING INTO THE CANISTER.
Remove the dirty water tank and see if the front nozzle is fitted correctly, also see if the filter is clean on the dirty water tank
My carpet was dirty in spots. after using my pro heat , the whole carpet is dirty. some of the dirty water came out at the sides and left blotches of dirt every where I pushed it. I am so disgusted. I’ve only used it 3 times and it’s never been satisfactory.
Dont fill water tank so full and change water more often. Home units are made for smaller jobs thats why rug doctors and others unit can be rented. Different systems altogether.
I HAVE A BISSELL PROHEAT CARPET CLEANER 7920 I DISSEMBLY IT TO CLEAN IT. I DON’T KNOW IF I PUT THE HOSES BACK IN THE RIGHT LOCATION BECAUSE AFTER I PUT IT BACK TOGETHER IT’S LEAKING WATER ALL OVER THE FLOOR BUT IT WILL RECOVER THE WATER FROM THE FLOOR AND THE SOLUTION WON’T SPARY OUT I THINK THE HOSES ARE NOT IN THEIR RIGHT LOCATION TO STOP THE FLOW WHEN IT’S NOT SUPPOSE TO BE COMING OUT CONSTANTLY HELP PLEASE IS THEIR A HOSE DIAGRAM FOR THE HOSES INSIDE THE CARPET CLEANER