Dyson DC25 Animal Bagless Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The brush bar button is on the left next to the power button.
Introduction. The Dyson brushbar power button is located in between the handle and the dust bin on the front of the vacuum.
This genuine Dyson vacuum part is the reset switch for the Dyson DC24 and D25 uprights. This switch needs to be activated if you experience a power surge while vacuuming, and your vacuum turns off as a result.
One of the first things to do when your Dyson vacuum cleaner keeps starting and stopping is to empty the bin. It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening.
Yes you do still have to hold the trigger down. I am sure this is an energy management thing to make the battery last longer by not running constantly.
Press the Airflow speed button to increase and decrease the airflow speed. Press the Airflow direction button to change the direction of airflow from front to back. Change the airflow direction for your personal comfort. Select the Airflow direction to Fan mode for airflow from the front for purifying and cooling.
this is not an official Dyson part you simply Slide the trigger lock onto your Dyson after which you can click it on so it stays. on. so a trigger button is there for a reason it ensures that you lose longer with your battery. and it`s safer.
A flashing light indicates that there is something wrong with your device and this may lead your vacuum to turn off. To fix this please refer to the “Machine Displays an LED Light” section with or call Dyson for additional help: 1 (844) 679-1647.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
If your dyson vacuum isn`t turning on, don`t panic – there are a couple possible causes. It could simply be that the vacuum overheated and shut itself off. If that is the case, wait 24 hours and turn it back on. However, another problem with dysons are failed power switches.
Check For Clogs or Blocks In The Vacuum

Check the hoses, the filters, and throughout the vacuum, and clean out any blockages or clogs. Vacuums will likely also have a recommended cooldown time to ensure that the vacuum won`t overheat. You will need to wait for that time before you turn the vacuum back on.

If your vacuum cleaner keeps turning off, this could be due to the following reasons: Blockages – check the hose and head for any obstructions. Filter – always check your filters, if these are clogged this could be causing the vacuum cleaner to work harder and lose suction power.
Dyson DC50 Brushbar On/Off Switch.
There are many reasons why your Dyson Airwrap may be overheating and shutting off. This could include excessive use, a clogged filter, or blocked air vents. Fixing this issue is relatively straightforward. First, make sure to give your device a break in between uses.
The LED light on the end of the handle will pulse with a blue LED light when charging, and the light will go out when fully charged. It can take up to four hours to fully charge your battery.
Press the Airflow speed button to increase and decrease the airflow speed. Press the Airflow direction button to change the direction of airflow from front to back. Change the airflow direction for your personal comfort.
you have to hold a trigger down in order for the motor to run. it doesn`t take much effort and doesn`t bother me or cause fatigue. this feature is to save battery power when you are not vacuuming. we really like the vacuum so far but have only owned it about a month.
The most common cause of no power is the machine overheating and cutting out. In this case once the vacuum cleaner loses power leave it for at least half an hour and then try turning it back on again. If it comes back on again after an hour then clean your filters and check for blockages.
To operate, point the remote control toward the front of the base. Press the Power ON/OFF button on the appliance or remote control to stop the purifier. The appliance will continue to monitor the air quality. Press the Airflow speed button to increase and decrease the airflow speed.
Press the blue cooling mode button to enter cooling mode. The power button light will change from red to blue to indicate that you have entered cooling mode.
If the vacuum is not plugged into its power outlet correctly, it will not turn on. Check to make sure that the vacuum`s electrical cord is completely plugged into the outlet. Additionally, the power outlet could be a problem.
Most cases of a jammed or stuck brush bar are quick and easy to fix, simply pulling the debris gently from the brush bar. Alternatively, if you need to clear a problematic blockage, you can take the brush bar out of the housing easily, for quick maintenance.
The Dyson V6 is designed so that you can store the unit on the charger. Storing the Dyson on the charger will not harm the battery and it is not necessary to use the unit until the battery is depleted.
MAX mode provides 6 minutes of the highest suction power for tackling really stubborn tasks, including trodden-in grit or clinging pet hair. To select MAX mode, first hold down the red on/off trigger so the machine is running, then press and release the MAX button on the rear of the machine.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Dyson dc25 power switch will not stay on – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : I called Dyson because I had a similar problem. When I pushed the red button down on my dc25, but it would not stay down. The vacuum would turn on when the button was pushed down, but of course when I let go of it the vacuum would shut off. The helpful telephone tech. Recognized the symptom right away and told me to push down on the button fully and let It flick up like a lighter. I about fell off my chair when that worked right away! Anyways for what it’s worth, she said sometimes the mechanism in the buttons gets consnarlitated (my tern, not hers!) and this resets the spring.

Dyson dc25 power switch wont stay on – Dyson DC25 All Floors Bagless Upright Vacuum
ANSWER : Hi Chett,

I’m sorry to hear you’re having difficulty with your DC25. If the switch doesn’t seem to be working correctly, I’d encourage you to get in touch with us directly as we’d appreciate the opportunity to provide further assistance.

You can reach us on 0800 298 0298 (UK), or 1-866-693-9766 (US). Please have the machine to hand when you call, so one of our advisors can run through some troubleshooting with you.

We’ll look forward to hearing from you.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Reset switch on the DC25 dyson vacuum – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. After you’ve checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the machine. For guidance in doing this, please follow the steps shown in the video below.

Please note, the brushbar will never rotate when the machine is standing upright, so make sure you’ve reclined the machine it into the vacuuming position before testing it.

I’m confident this will resolve the issue, but if you’d like any further assistance or advice, please call us on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com/
.

Power button won't stay down. – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

Sorry to hear you’re experiencing a problem with the power button on your DC25.

In case you haven’t tried this, give the button a firm push all the way down. If this doesn’t resolve the issue, please get in touch with us, free, on 08002980298 (UK), or 1866MYDYSON (US) so we can help.

Kind regards,

Jack
Dyson Customer Service

Dyson animal will not stand upright – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

I’m sorry to hear you’re having difficulty standing your DC25 Animal upright. It sounds as if the stabiliser needs realigning. This is simple to do – please follow the steps shown in the video below.

If you’d like any further assistance or advice, please give our customer Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Dyson reset button – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

DC25 doesn’t have a reset button – if the brushbar isn’t rotating, please follow the steps shown in the video below to check the cleaner head and brushbar for obstructions, then reset the machine.

Please note, the brushbar will never rotate when the machine is standing upright, so make sure you recline your DC25 into the vacuuming position before testing it.

You may also want to refer to our online Support guide:

http://www.dyson.co.uk/support/dc25/dc25-multi-floor/my-machine-is-not-working/my-brushbar-is-not-rotating/stabiliser-check

This should resolve the issue, but if you’d like any further assistance or advice, please give our customer Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Dyson Animal is not powering up – Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
ANSWER : It might be the eletrical inside the machine.or even the power cord.

DOES THE DYSON ANIMAL HAVE A RESET BUTTON. – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Normal. 0. . . false. false. false. . . . . . . . . MicrosoftInternetExplorer4. .. . ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0cm 5.4pt 0cm 5.4pt;.\011mso-para-margin:0cm;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;.\011mso-fareast-font-family:”Times New Roman”;.\011mso-ansi-language:#0400;.\011mso-fareast-language:#0400;.\011mso-bidi-language:#0400;}....Most Dyson cleaners have a thermal cut-out to protect.the motor from overheating in the event of a restriction to the airflow. So, if anything causes it to overheat, it will.switch off. If this happens, leave the cleaner switched off for at least two.hours, as it will not start again until it has cooled down.
..
..The most common cause of a.cut-out is that the cleaner has a blockage or the filter needs washing. A high room temperature may also trigger.it. Before you continue vacuuming,.ensure the filter is clean and there are no blockages. You can download the user guide at www.dyson.co.uk/support/. Just click on ‘Get Expert Help’ then ‘Using my Dyson product’ then ‘User Guide’.


Hope that this information is useful to you.


Kind regards
Darran
Dyson Customer Service