Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Hold the plug when rewinding onto cable reel. Do not allow the plug to whip when rewinding. To retract the cable, press the button firmly until it clicks and the cable rewinds.
This 17-pound canister from Dyson is bagless and has suction control, micro-filtration, a brush on/off switch and a 21-foot retractable cord.
The simplest place to start: empty your dirt container. Debris in the main cyclone passage will cut suction rapidly. If the container was really full, you should also check the filters because they can get loaded with dust if the Dirt container is too full. Test the vacuum, and see if the suction is back.
In many cases, you probably can repair a Dyson yourself, especially when it comes to common issues (see below). However, even if your machine needs some extra TLC by a Dyson expert, it can be worth getting it repaired.
They use a spring mechanism to provide the retraction force. As the cord is uncoiled and pulled out for use, tension builds up on the steel torsion spring. Once the electrical power is no longer needed, the stored energy in the torsion spring is released, retracting the cord back to the reel.
The company is going to focus on its smaller, battery powered models, it said. It made the announcement as it revealed its new Cyclone V10 cordless vacuum, which it says is “why we`ve stopped developing corded vacuums”.
Dyson to stop making wired vacuum cleaners after cordless Cyclone V10 launch. Dyson has unveiled its newest cordless vacuum cleaner, which the firm says is the reason it will no longer make wired vacuums.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
As a general rule, if the repair is going to cost less than half the cost of a new vacuum cleaner, it`s best to go ahead and get it repaired. When the service tops half the price of a new machine, it`s probably best to invest in a newer model.
Dyson invested £2.5 billion in research and development.

While you might feel that this is the reason their products are expensive, you`re highly mistaken. This investment was mainly to accommodate a centre for their 1,200 employees, 22 laboratories, prototyping space, and areas for collaborative work.

Twisted Cord – Oftentimes we see that the rubber exterior of a cord is very twisted and disfigured by one of the ends of the vacuum. This is caused by the user either winding the cord from the plug to the machine or from the machine side to the plug with the plug still in the outlet.
The battery is designed to be left on charge permanently, and this will ensure that the vacuum is fully charged when it`s next used. Once the battery is fully charged, your cordless vacuum won`t use any more electricity. All batteries differ and may vary during their lifetime.
Dyson sold its first cord-free vacuum, the handheld DC16 machine, in 2006.
Cord Rewind: 25FT cord automatically retracts with the touch of a button. Multi-Floor Performance: 5-level height adjustment for various hard floors and carpet types. Multipurpose Attachments: Tools for corners, crevices, stairs, furniture and more. WindTunnel Suction Technology: Enjoy powerful, long-lasting suction.
The Retractable Cord Reel provides a handy and durable power cord storage solution that gives you convenient temporary access to power and ultra-clean storage capabilities. The cord can easily be extended off the reel to exactly where it`s needed, then easily retracted when done.
Dyson was designed and patented by a British, had it made in Malaysia (Johor Bahru), – as it is cheaper to make here.
Dyson cordless chargers are NOT all the same. It is imperative you know your model number before ordering. These are NOT suitable for Dyson cordless models not listed above. That means these chargers DO NOT fit DC34, V10, V11, etc.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
A strong odor from the shellac that coats the copper coil windings is an indicator that the motor is about to or has burnt out. If the motor is still running, even if it turns on and off by itself as it is heating and cooling, you can still run the motor until it gives up for good.
Sometimes your vacuum pulsates on and off or keeps dying when using the extra powerful `Max Mode`, which can be related to the charge of your battery. Try turning this function off by pressing the Max button on your vacuum.
If you`re looking for a complete rebuild, you can expect to pay $100 or more. However, you may be able to get your Dyson repaired for free if the service is covered by the product`s warranty. According to Dyson, cordless vacuums have a two-year warranty while corded models have a five-year warranty.
A little bit of water can do wonders for boosting a suction cup`s grip. Using warm water, rinse the whole cup so it softens it up. Shake the drops of water off the cup quickly and then put it up on the wall. That can often do the trick.
There are varying degrees of quality and value when it comes to vacuums; if you paid a lot for the appliance, repairs are likely worth it, but we recommend that you don`t spend more than half of the original price for any repairs.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I had the vacuum cleaner question about the canister and the wand/powerhead… the Kenmore Progressive Vacuum canister model 116.25812 and the canister not powering off without unplugging the vacuum. The solution I received that they both run on their own switch so it is normal makes sense. However, is there a power switch on the canister anywhere? The only way for the canister to be turned off is by unplugging it. Any ideas? One would think there would be a switch. I am new to fixya and hope
ANSWER : Hi. On some models, one switch controls all of the power. Your issue, which is no working switch is almost certainly a blown triac on the circuit board in the canister – kenmore part number KC86WBZRZ000

Looks like a common fault with this particular model judging by the number of complaints on the web.
.
.Take it to your local vacuum repair shop and they should be able to fix it for a nominal fee.

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

No suction on my Dyson canister vacuum. – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hey,
I see this problem is more frequent..
I’m guessing your dyson ‘sounds’ blocked.
See my solution:
http://www.fixya.com/support/t4547920-loss_suction
This fixed mine right up.
It was not working well at ALL, so i opened it up, cleaned it all, and now it’s sucking like it was new.

GL!

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Loss of suction in dyson dc08 – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi there,

If your DC08 doesn’t seem to be picking up as well as usual, there may be a blockage in the machine. The filter may also need a wash.

The easiest way to locate and remove any blockages is to follow the steps shown in our online support guide:

http://support.dyson.co.uk/support/dc08/dc08-standard/my-machine-is-not-working/machine-not-sucking-picking-up-as-well-as-usual/check-the-floor-tool

In normal use, the filter needs to be washed at least once every 3-6 months, as shown in the video below. Use cold water without detergent, and allow at least 12 hours for the filter to dry completely before replacing it.

This should resolve the issue, but if you’d like any further assistance or advice, please call us on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How do I open my dyson cylinder – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi its Darran at Dyson.

If you are referring to the cyclone top and bin assembly, once removed from the machine, there is a button at the base of the handle that has Dyson written on it that you press and pull the cyclone top and bin apart to empty it.

If you need any further help or advice, please try the Support section on our website at www.dyson.com.

Kind regards
Darran
Dyson Customer Service

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

How do i clean all the dyson dc08 – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi its Darran at Dyson.

A full blockage procedure can be found in your user guide or on our website at www.dyson.co.uk/support.

I hope that you find this useful and should you require any further assistance with your DC08, please contact our Helpline on 0800 298 0298.

Kind regards
Darran
Dyson Customer Service

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Retractable power cord
ANSWER : JUST LIFT OFF THE TOP HALF. CAREFULLY REACH IN FROM THE LEFT SIDE AND DISCONNECT THE CLEAR PLASTIC HOSE THAT IS ATTACHED TO THE “DIAL” ON TOP OF THE MACHINE. THEN LAY THE TOP HALF OF THE MACHINE TO THE RIGHT. DON’T DISCONNECT ANY WIRES. YOU’LL HAVE TO HAVE A NEW CORD WINDER (LOOK ON E-BAY). THE MOTOR AND CORD WINDER ARE ATTACHED TO EACH OTHER BY WIRES AND CAN BE LIFTED OUT OF THE CANISTER.EVERYTHING YOU DO JUST REMEMBER THAT ALL OF THESE PARTS ARE ATTACHED TO EACH OTHER BY WIRES. THE ONLY WIRES YOU’LL NEED TO DISCONNECT ARE THE ONES ATTACHED TO THE CORD WINDER ASSEMBLY. THEY JUST PULL OFF, NO TOOLS ARE NEEDED.
.QUITE FRANKLY THIS IS A ROYAL PAIN AND YOU’LL PROBABLY WISH YOU TOOK IT TO A REPAIR (AERUS/ELECTROLUX) SHOP. IF YOU DECIDE TO DO IT YOUR SELF TAKE PICTURES OF EVERY STEP…’CAUSE YA GOTTA PUT IT ALL BACK TOGETHER.
.GOOD LUCK!

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Dyson brush replacement – Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum
ANSWER : Hi there,

I’m not sure which brush you’re referring to, but you can order replacement parts and additional accessories for your DC08 directly from our online store:

http://www.dyson.co.uk/store/spares.asp

If you’d prefer to place an order over the phone, or to consult with one of our advisors before making a purchase, please call us free on 0800 298 0298. Our Helpline is available from 7am until 10pm, 7 days a week.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #’s anywhere online, not even partsdirect.com. any help would be great. thanks, david
ANSWER : Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est

Read Full Q/A … : Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Hi, my name is Mea Archer, owner of the vacuum cleaner blog, the niche website that I have developed to provide the most up-to-date news, reviews and the latest advice and information for all things vacuum cleaner related.