Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If you suspect that the motor is damaged, you should not continue to use the vacuum cleaner! The cause of motor damage is usually wear and tear or damage caused by prolonged improper use (e.g. overheating). In most cases, it is not worth repairing.
If the pressure is too high, it can cause a head gasket to be pushed out, can cause cylinder head hardware to break or in some cases, will cause detonation inside the engine.
To recycle your old cords, e-waste facilities are your best option. Many communities now have dedicated e-waste recycling facilities, either run by private companies or by the local government. Best Buy is another popular e-waste recycler, and power cords are just one type of item they accept.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
.
.http://www.dysonmedic.com/DC07%20Folder/DC07%20Motor%20change.html
.
.Reassemble by reversing dissassembly instructions.
I suspect the belt you are to refering to is the one from the clutch to the brush bar. Unfortuenately the other belt is hidden under a plastic cover, so you cant see if it is okay or not without some dismantling. This cover is not easy to remove and requires a Torx driver to under the securing screws.
Have a look at www.dysonmedic.com, but unless you have access to such a tool, probably time to call Dyson or a Vacuum repairer.
Remove the bin and cyclone assembyl by pressing the release button above the word Dyson on the carrying handle towards the machine.
Then hold the bin and cyclone assembly over a dustbin and pull the trigger located underneath the carrying handle which will release the bin base to empty the dust and debris from the bin.
I hope this information is useful to you and should you need any further help or advice, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US).
Kind regards
Darran
Dyson Customer Service
http://www.vacuumcleanersparesuk.co.uk/acatalog/DYSON_DC07.html
Once you have the main body housing cover off, then you can access the 2 screws atop of each trunnion cover that holds the motor assembly cover halves together. If you’ve made it this far, then gently pry apart the motor halves keeping even as yo do. Now you can see all the wiring necessary to cut and splice. Happy cord replacing! As for me, I am headed for the store, as I am not so sure I can remember how to get the darn thing put back together. But it was fun taking it apart!
If you are experiencing a drop in performance, please follow the full diagnostics outlined in the support section on our website at www.dyson.com.
If this does not resolve the issue, please contact our Helpline on 0800 298 0298 (UK) or 1866MYDYSON (US).
Kind regards
Darran
Dyson Customer Service