Kirby Vacuums\015 I took apart wheel and axle and can’t get it back together, don’t know where the little spring goes exactly. just thought of taking off the wheel itself to put it back on, that’ll probably work, but still don’t know exactly how it fits on properly.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

All Kirby vacuums use the same size belt for the brush roller. This vac belt will fit every Kirby vacuum model roller brush, including: Avalir 2. Avalir.
On/Off Brushroll: turn brushroll `on` for carpeted surfaces and `off` for hard floor cleaning. 10″ Nozzle: provides a path for quick clean-ups. Lightweight Design: easy transportation from room-to-room and up-and-down stairs.
For more than 100 years, every Kirby has been handcrafted in the United States from die-cast aluminum.
If you demand the absolute best in your vacuum cleaner, you can`t go wrong with the Kirby Avalir 2. This trusted solution is built to last, so it will deliver years of deep cleaning. You`ll never regret investing in a high-quality vacuum that makes your life easier.
Kirby vacuum prices are higher than many vacuums found at big-box stores, but that`s because Kirby vacuums are made of durable materials that will last for years. Why replace an inexpensive vacuum over and over again when you can purchase a Kirby vacuum? This complete home cleaning system that will last for a lifetime.
VACUUMING. Q: What is the N/D pedal on the back of the Kirby for? A: This is your Neutral/Drive pedal. When you are vacuuming or using the carpet shampooer in the upright position, push down the Drive (D) pedal.
Sucking up small items like rubber bands, beads, small Lego`s, etc. will wreak havoc on a vacuum belt. These items can also cause clogs in the inner vacuum hose.
You should replace the belts on your vacuum at least every three to six months if the vacuum is regularly used. This is very important for proper cleaning.
A vacuum cleaner`s brush roller also called the beater bar assists in cleaning your carpets and depending on your vacuum model, a variety of floors. The brush roller is usually located under the vacuum cleaner and some in the attachment tool.
Vacuum Cleaner: Why doesn`t my vacuum cleaner`s brush roll spin? A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped brush roll motor overload, failed brush roll motor or a wiring failure in the wand or nozzle can prevent the brush roll from spinning.
The brush roll or its bearings may be clogged with hair, threads or dirt. Make sure they are clean and the roll spins. The belt may also have slipped because it was loose. Check the fit of the new belt when it is installed.
The roller brush makes it possible to get dirt out of carpets. The roller brush is the combination of a belt, a roller, and sometimes a small vacuum head motor. The roller spins, and the bristles attached to it sweep up debris that then gets sucked into the dirt container of the vacuum.
A turbo brush contains a rotating brush to lift and beat your carpet or fabric as you vacuum. The rotating brush in a turbo brush is air-driven and relies on the suction power of the vacuum to keep rotating. The more powerful your vacuum the faster and more effective the turbo brush.
Beater Bars

Many vacuums feature a rotating brush, known as a beater bar, which is designed to agitate the carpet fibers to help loosen soil deep in the pile. This feature is helpful in many cut-pile carpets but can be damaging to certain styles.

The Dyson vs. Kirby vacuum cleaners debate can be complicated, as these brands are so different. If it comes down to price or size, Dyson will probably get the upper hand — but for all other vacuuming considerations, Kirby is the way to go.
Kirby vacuum cleaners are made of die cast aluminum where most other vacuums are made of plastic. This makes the Kirby vacuum more durable than other model on the market. This is why the average lifespan of a Kirby is over 30 years.
Manufacturing Date: 1990 – 1993

The G3 model introduced a new look and feel to the overall Kirby!

Perhaps one of the most well-known copy abilities in the Kirby series, Hammer is considered one of the strongest abilities for its power and utility.
In 1935, the company introduced the Kirby Model C, the first product to carry Jim Kirby`s name. One of the key features is the amount of suction the motor generates.
Kirby vacuum systems are engineered to get the dirt that others leave behind. Our HEPA filtration vacuum bags trap dirt and debris preventing allergens from getting back into your home.
Kirby (Japanese: カービィ, Hepburn: Kābī, Japanese pronunciation: [kaːbiː]) is a fictional character and the main protagonist of the Kirby series of video games owned by Nintendo and HAL Laboratory.
The price of vintage Kirby vacuum cleaners can vary widely, depending on their age and condition. The least expensive ones are probably worth about $100 and high-end models might sell for $2,000 or more. But if you`re looking to buy one that hasn`t been refurbished, expect to spend several hundred dollars.
Jim Kirby created the first Kirby vacuum cleaner in 1906, and ever since, The Kirby Company has continuously improved its American-made, hand-crafted Kirby Home Cleaning System design to ensure best-in-class performance.
One of the easiest ways to increase vacuum cleaner suction is to empty the dust bag or container. Dust containers need to have enough space for airflow, otherwise, they could get clogged and have less suction power. Regularly check your dust compartment and empty or change it when it`s already 70-80% full.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Read Full Q/A … : Kirby Vacuums

Replace wheel axle on my kirby g3 vacuum. have a
ANSWER : The spring goes inside that pedal that you step on to advance the height. Place that spring in that pedal and then place the pedal into its’ groove, then put the axile and wheel assembly over the pedal and put your screws back into the mounting sections.

Read Full Q/A … : Kirby Vacuums

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)

Read Full Q/A … : Kirby Vacuums

The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
ANSWER : The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.

Read Full Q/A … : Kirby Vacuums

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Read Full Q/A … : Kirby Vacuums

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby’s are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,
ANSWER : You can get better prices from Goodvac.com

Read Full Q/A … : Kirby Vacuums

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci

Read Full Q/A … : Kirby Vacuums

Kirby vacuum I have a G 6 kirby vacuum. The power cord has been checked and has continutity and replaced the power switch and the vacuum will still not run
ANSWER : There are 2 safety switchs, one on the front that the nozzle activates, and one on the side that the bag asembly activates. The motor brushes and/or armature maybe bad.

Read Full Q/A … : Kirby Vacuums