Dyson DC25 Animal Bagless Upright Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

This genuine Dyson vacuum part is the reset switch for the Dyson DC24 and D25 uprights. This switch needs to be activated if you experience a power surge while vacuuming, and your vacuum turns off as a result.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on.
3 cleaning modes Power button Press the power button to start cleaning. Lean to clean Lean handle back to start a clean. Leave upright to direct suction to the wand.
Press and hold the power button on the machine for approximately 20 seconds. The WiFi light will flash both green and white in a rapid sequence of flashing lights, before switching itself off. Once this sequence has been completed, the machine will have been reset and you can release the power button.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on. Please note: In normal use, the Brush bar automatically turns off when the machine is upright and automatically turns on when the machine is in the vacuuming position.
Reset the machine without the app

Press and hold the `Standby ON/OFF` button on the purifier for longer than 20 seconds. The WiFi symbol will flash alternately between white and green to indicate that your network setting shave been removed.

It`s called the Dyson Gen5detect vacuum. This has the single button power option.
If your Dyson vacuum refuses to turn on, its battery might not be charged. Charge the vacuum`s battery for at least two hours. After the battery is fully charged, power on the vacuum and try using it again.
The most common cause of no power is the machine overheating and cutting out. In this case once the vacuum cleaner loses power leave it for at least half an hour and then try turning it back on again. If it comes back on again after an hour then clean your filters and check for blockages.
Plug your machine into a working plug socket and press the yellow `Test` button. Once the red `Reset` button has popped out, unplug your machine from the plug socket. While unplugged, press the red `Reset` button. Plug your machine back into a working plug socket and test the power again.
Sadly, most Dyson cleaners do not feature a reset switch. So the best way to resolve the problem is to unplug the machine and let it rest and cool down for a minimum of one hour. This automatically resets the appliance and makes it ready for use.
Important: Reset your filter Press and hold the Night mode button on the remote control. The LCD screen on your machine will count down from five, finishing with the default screen. The filter level will be reset and your machine is ready to use.
Over time, all batteries are subject to degradation. So if your run time has declined when the machine is not in Max / Boost mode, it might be time to buy a new battery.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
Hold the red trigger down with one hand and with the other, firmly push the MAX power button in.
Resetting your carbon filter life Press and hold the Oscillation button on your remote control. The display on your machine will countdown from five, the filter life will be reset and your machine is ready to use.
Press the standby button on the appliance to turn ON/OFF. Press and hold the standby button on the appliance to adjust the target temperature. The target temperature will increase to a maximum before decreasing.
Standby on/off Press the Standby on/off button on your Dyson purifying fan heater or remote control to stop your machine. It will continue to monitor the air quality. Continuous monitoring Continuous monitoring is turned off by default. Once turned on, it will always be active until you turn it off again.
If it keeps flashing after being washed, dried thoroughly and reattached, the filter needs to be replaced.
How Vacuum Switches Work. Once the switch registers a change in the negative pressure based on the preset sensitivity of the setpoint, the diaphragm of the switch will open or close the attached circuit, turning off or powering on a device. Vacuum switches can be used with NO and NC states.
What is a Vacuum Switch? Vacuum pressure switches are designed for sensing pressure changes in a vacuum. A pre-set point will be determined, and once this is reached or surpassed, the vacuum switch will either open or close the electrical connection.
What`s the switch on the cleaner head for? You can use the switch on the High Torque cleaner head to further adjust the suction. Slide it towards the `+` for maximum suction for ground-in dirt and large debris on durable floor coverings.
A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, please charge the battery. A flashing amber light indicates that there is no power or a temporary fault (e.g. too hot/cold).
What`s the switch on the cleaner head for? You can use the switch on the High Torque cleaner head to further adjust the suction. Slide it towards the `+` for maximum suction for ground-in dirt and large debris on durable floor coverings.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Reset switch on the DC25 dyson vacuum – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

Your DC25 is equipped with a sensor which shuts off the brushbar if something jams it. After you’ve checked the cleaner head for obstructions, and removed any threads or hair from around the brushbar, you should be able to reset the machine. For guidance in doing this, please follow the steps shown in the video below.

Please note, the brushbar will never rotate when the machine is standing upright, so make sure you’ve reclined the machine it into the vacuuming position before testing it.

I’m confident this will resolve the issue, but if you’d like any further assistance or advice, please call us on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com/
.

Dyson animal will not stand upright – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

I’m sorry to hear you’re having difficulty standing your DC25 Animal upright. It sounds as if the stabiliser needs realigning. This is simple to do – please follow the steps shown in the video below.

If you’d like any further assistance or advice, please give our customer Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Dyson dc25 power switch will not stay on – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : I called Dyson because I had a similar problem. When I pushed the red button down on my dc25, but it would not stay down. The vacuum would turn on when the button was pushed down, but of course when I let go of it the vacuum would shut off. The helpful telephone tech. Recognized the symptom right away and told me to push down on the button fully and let It flick up like a lighter. I about fell off my chair when that worked right away! Anyways for what it’s worth, she said sometimes the mechanism in the buttons gets consnarlitated (my tern, not hers!) and this resets the spring.

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

Dyson dc25 power switch wont stay on – Dyson DC25 All Floors Bagless Upright Vacuum
ANSWER : Hi Chett,

I’m sorry to hear you’re having difficulty with your DC25. If the switch doesn’t seem to be working correctly, I’d encourage you to get in touch with us directly as we’d appreciate the opportunity to provide further assistance.

You can reach us on 0800 298 0298 (UK), or 1-866-693-9766 (US). Please have the machine to hand when you call, so one of our advisors can run through some troubleshooting with you.

We’ll look forward to hearing from you.

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Dyson reset button – Dyson DC25 Animal Bagless Upright Vacuum
ANSWER : Hi there,

DC25 doesn’t have a reset button – if the brushbar isn’t rotating, please follow the steps shown in the video below to check the cleaner head and brushbar for obstructions, then reset the machine.

Please note, the brushbar will never rotate when the machine is standing upright, so make sure you recline your DC25 into the vacuuming position before testing it.

You may also want to refer to our online Support guide:

http://www.dyson.co.uk/support/dc25/dc25-multi-floor/my-machine-is-not-working/my-brushbar-is-not-rotating/stabiliser-check

This should resolve the issue, but if you’d like any further assistance or advice, please give our customer Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

DOES THE DYSON ANIMAL HAVE A RESET BUTTON. – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Normal. 0. . . false. false. false. . . . . . . . . MicrosoftInternetExplorer4. .. . ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0cm 5.4pt 0cm 5.4pt;.\011mso-para-margin:0cm;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;.\011mso-fareast-font-family:”Times New Roman”;.\011mso-ansi-language:#0400;.\011mso-fareast-language:#0400;.\011mso-bidi-language:#0400;}....Most Dyson cleaners have a thermal cut-out to protect.the motor from overheating in the event of a restriction to the airflow. So, if anything causes it to overheat, it will.switch off. If this happens, leave the cleaner switched off for at least two.hours, as it will not start again until it has cooled down.
..
..The most common cause of a.cut-out is that the cleaner has a blockage or the filter needs washing. A high room temperature may also trigger.it. Before you continue vacuuming,.ensure the filter is clean and there are no blockages. You can download the user guide at www.dyson.co.uk/support/. Just click on ‘Get Expert Help’ then ‘Using my Dyson product’ then ‘User Guide’.


Hope that this information is useful to you.


Kind regards
Darran
Dyson Customer Service

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.