Electrolux Epic 6500 Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If the vacuum cleaner stops suddenly, the filters should be checked to make sure that they are not blocked or that they require changing. This applies to both bagged and bagless models. Also check if the nozzle or hose are blocked.
Canister vacuums separate the motor and dirt container from the handle and (power) head. A hose connects the handle and head to a canister which houses the motor and dirt container. The choice of canister vs. upright vacuums depends heavily upon your usage, personal preference, and budget.
Check for a plugged hose:

Plugged vacuum hoses are sometimes the reason for a loss in suction. Hoses can get clogged with hair, dust bunnies, string, or anything else that can`t pass through the other end of the hose. Airways inside the machine should be looked at as well. Wherever there is an air passage, check it.

Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
A canister vacuum consists of a wheeled body that is attached to a vacuum wand and power head via a flexible plastic hose. The canister portion of the vacuum contains the main motor, filter, and any dust bags; depending on the model, the power head may also contain a smaller motor.
To do this, remove the base of the unit with a twist or by unlatching, then dump the debris and put a plastic bag over the bottom and shake the center-weighted cloth filter. On top emptying models simply open the top and remove the bag.
The motor filter is located behind the Electrolux S Bag. To reach it, simply push the bag to the side. To open up the motor filter compartment, press downward to release the locking mechanism and pull forward to access the motor filter.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

Read Full Q/A … : Electrolux Epic 6500 Vacuum

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Read Full Q/A … : Electrolux Epic 6500 Vacuum

Electrolux Epic 6500 SR cord will not rewind – Electrolux Epic 6500 Vacuum
ANSWER : Unfortunately most cord reels cannot be repaired and must be replaced as a unit.
That Vac Guy

Read Full Q/A … : Electrolux Epic 6500 Vacuum

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Read Full Q/A … : Electrolux Epic 6500 Vacuum

Cord will not retract on epic 6500 sr – Electrolux Epic 6500 Vacuum
ANSWER : Try tipping it on its end,or nearly so. Then tug gently and release until it retracts. This has worked for me nearly every time I’d tried on various Electrolux vacuums.
.If this doesn’t work, the vacuum needs to be taken to an authorized Aerus Electrolux store for repairs.
.
.http://www.aerushome.com/storelocator/

Read Full Q/A … : Electrolux Epic 6500 Vacuum

Bag full vacuum shut off. Is there a reset – Electrolux Epic 6500 Vacuum
ANSWER : You didn’t mention the model, but with several Electrolux canister models, I’d say there’s probably a problem with the control valve assembly inside the canister. This would need to be repaired at an authorized Aerus Electrolux store. If unsure where the nearest store is, use this link to locate one:
.http://www.aerushome.com/storelocator/
.
.The tip on the following link covers other possible causes.
.
.http://www.fixya.com/support/r7367127-electrolux_epic_6500_trouble_shooting

Read Full Q/A … : Electrolux Epic 6500 Vacuum

I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci

Read Full Q/A … : Electrolux Epic 6500 Vacuum

How to re mantle vacuum hose at handle – Electrolux Epic 6500 Vacuum
ANSWER : It is explained in the manual. If you need manual, let me know, i can send the link for it.

Car Parts

Read Full Q/A … : Electrolux Epic 6500 Vacuum

Hi, my name is Mea Archer, owner of the vacuum cleaner blog, the niche website that I have developed to provide the most up-to-date news, reviews and the latest advice and information for all things vacuum cleaner related.