iRobot 5800 Scooba Vacuum\015 I purchased a Scooba from someone brand new, never out of the box. It worked about four times and did a great job! After about a week it just would not turn on. It shows that it is charging and then fully charged but when I unplug the charger and push power I get nothing. No light, no beep, nothing. I tried contacting iRobot for help but received no response. I finally figured it was the battery (dated 2005) and purchased a new battery. It arrived last night, I installed it and pushed power. It came on right away which confirmed to me that the other one was just dead. Well, I go to put the Scooba on this morning and again, nothing. Nada. No power. Anyone? Thanks so much!\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If your Roomba® i Series Robot Vacuum is not turning on or is not able to charge, rebooting your robot tends to solve most related issues. To reboot your Roomba: Press and hold the CLEAN button for 20 seconds. After you release the button, the light ring will show a white clockwise swirl while it reboots.
You may want to reset your robots charging system by removing the battery and then pressing the power button for at least 15 seconds. Then reinserting the battery and charging it for 72 hours. This refresh charge may help your robot.
Reset the Scooba 450 by pressing and holding down “i” (info) and “Room size” buttons for 10 seconds.
If your roller is not spinning, the first step is to remove the roller and free any debris. Refer to your model`s user manual on how to remove the roller from your vacuum head. Debris can also be left on the vacuum head it is important to also clean this area including the sides where the roller brush connects.
Charging error twenty (20) means your robot`s battery was not initialized upon charging. Remove and re-install your battery to resolve the issue. If the error persists, contact iRobot Customer Care for additional assistance.
The most common problem with a vacuum cleaner is also the easiest to remedy: clogs in the hose or attachments. Also the electrical cord, motor, switch, fan, brushes, and motor bearings can all need repair or replacement. The drive belt may need replacing; and the attachments, hoses, and filters may need unclogging.
What should I do if the remote control doesn`t work? – Replace the batteries in the remote control. – Make sure the main power switch on the bottom of RoboVac is in the “I” position. – Make sure RoboVac is fully charged.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
The brushes on the Hoover All Terrain Steamvac won’t turn. However, when I try to turn them manually they will turn. So, why won’t they turn when the machine is turned on?
ANSWER : Some vaccums have a belt on the brushes. might need a new one if it does have the belt
The beater bar on my Dyson won’t turn. The vacuum runs and suctions but the bar won’t turn and the belt is not broke. The beater bar did get a carpet fiber caught and wrapped around it which stopped the bar and I removed the bar to cut the fiber loose and replaced it and now it won’t turn
ANSWER : The belt doesn’t have to be broken to make the vacuum not work correctly. If the belt is stretched the vacuum won’t operate the way it is supposed to. You can get replacement Dyson Belts here:
Dyson Replacement Belts
I have the smaller oreck portable hand vaccuum & it won’t turn on. It was working fine in the one bathroom & I moved to the other & bathroom & it won’t work or turn on at all?
ANSWER : Check the wall outlet has poser and make sure the plug is fully inserted.
My Fein won’t turn on without rapping it on the floor ! I turn the switch on and it won’t run until I tap or rap it and will shut off during operation. I’m sure there’s something loose , but should I attempt it or take it back for repairs . Last time I tried it , it woudn’t turn on at all . My wife purchased it earlier this year from a TV infomercial .
ANSWER : ELECTRIC FIELD (and all the push contacts are most of the time the problem the cause by this machines , dirt in the switch (the switch is made to disassemble to clean it sometimes .little screwdriver neccesary .
Won’t turn on, red triangular warning light turns on. It worked a few days ago and now nothing happens when I press the button to turn the motor on. I have a Meile Champagne canister vaccum that won’t run.
ANSWER : Hi
The bad news is 99.9% the motor is gone
Infinity Vaccum by Shark, model number NV31COS, will not start. The vacuum was running just fine until it grabbed the edge of a curtain. Turned it off to release the suction. Turned it back on and was working fine. About a minute later the vacuum was making an odd noise. Every 2 seconds or so it would “heave” (lack of a better word) then go away, then come back and so on. Turned the vacuum off and checked for blockage, none that could be seen or felt, and now the vacuum won’t turn. Any suggestio
ANSWER : Carpet brush won’t turn when vac on
My Dyson DC07 will not turn on. I was just using it and moved to a new area and plugged it in and it turned on for a split second and then it turned off and now it won’t turn on at all. Any suggestions?
ANSWER : Loose wire, bad switch, or thermal cut-out. In any event, you will have to use a voltmeter to troubleshoot the problem, there is no way of knowing the problem otherwise
Why won’t the brushes turn when on the carpet? They will turn if I lift it up off carpet. I have adjusted the height and everything and they won’t turn.