Sebo Automatic X1 Bagged Upright Vacuum\015 My husband visit Germany end of September 08 – I want a Sebo power brush machine. I am not sure what to call the machine but you need it after you covered your carpets with the Sebo powder (to clean the carpet). The machine you use to bruch (or work the powder) into the carpets – you leave until dry and thereafter you vacuum with a vacuum cleaner. I know you find Sebo vacuum cleaners but you also find those machines (got roller brushes) looks like a vacuumcleaner. Where can he find one for me he’s coming to hanover to the truck show. He will come to Germany regularly and I love to use Sebo products – it is the best. Please can you assist me. Regards Ina Greeff (email: [email protected])\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

SEBO Automatic X1/X1.

In 1991, SEBO began to branch into the domestic market with an upright cleaner known as “Automatic X1” upright and built from commercial components and low energy release motor.

Sebo vacuum cleaners blow away cheaper brands when it comes to suction power and cleaning ability. This makes them especially valuable to people who have pets as a Sebo vacuum will easily clean up any amount of hair from your floors, and with their superior filtration and bags, will keep your air clean while doing so.
In 1991 SEBO started in the retail market with the SEBO automatic X1 upright. This machine introduced sensor-controlled brush height adjustment for optimum cleaning performance which remains unique to SEBO.
Made In Germany, SEBO vacuum cleaners are Carpet Manufacturer recommended for the correct care and maintenance of soft floor products.
SEBO vacuum cleaners, made in Germany, world`s best vacuum cleaners. INCREDIBLE WARRANTIES! All SEBO models include standard warranty coverage of seven-years on motors and five-years on non-wear parts and labor charges.
Dyson no longer develops mains-powered vacuums. Sebo does. Sebo vacuums are, without doubt, more reliable and longer-lasting than Dyson. Sebo has a five-year guarantee; Dyson cordless machines have a two-year guarantee.
SEBO produces its products in Germany and is known for manufacturing the best pet vacuum cleaners on the market. Miele sells a more extensive range of appliances as well as vacuum cleaners. There are parallels and variations in the product selection of the two firms. For instance, both brands sell only bagged vacuums.
In 1996, Electrolux introduced the first robotic vacuum cleaner, the Electrolux Trilobite. It worked well but had frequent problems with colliding with objects and stopping short of walls and other objects, as well as leaving small areas not cleaned.
Magic VacĀ® PowerBrush can be used as a lightweight and powerful stick vacuum for quick pickups of messes across multiple surfaces, including carpet, area-rugs, and hard floors.
The typical life expectancy of vacuum motor brushes is around 800 to 900 hours of use; the bearings or the armature usually fails shortly after.
The SEBO is more expensive, heavier, and has a smaller dust bin capacity (by almost 2 liters). Both vacuums are relatively heavy, but Dyson is saved by the price, performance, and thorough filters. The SEBO has 9ft more cord, but little else to compete with Dyson`s model.
SEBO vacuum filters should be changed after every 10 to 20 bags, depending upon use time & the type of debris material collected by the vacuum. However please trust your visual inspection, if you see that a filter is excessively dirty or the bags appears to be quite full, do not hesitate to change it.
In 1996, Electrolux introduced the first robotic vacuum cleaner, the Electrolux Trilobite. It worked well but had frequent problems with colliding with objects and stopping short of walls and other objects, as well as leaving small areas not cleaned.
Beginning in 1910, Electrolux has been manufacturing quality vacuum cleaners. From the earliest model, the Model I, to the latest Ultra Collection series, each of these machines is extremely durable and very powerful. Until recently, locating replacement parts for these models was a difficult task.
SEBO created the first `modern` commercial upright vacuum cleaner in 1978. Indeed, they could be regarded as the template upon which most uprights are now based. SEBO introduced many features which are now common on vacuum cleaners, e.g. the integrated hose, direct-drive toothed belts and electrostatic micro filters.
Beginning in 1910, Electrolux has been manufacturing quality vacuum cleaners. From the earliest model, the Model I, to the latest Ultra Collection series, each of these machines is extremely durable and very powerful. Until recently, locating replacement parts for these models was a difficult task.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Electrolux vacuum brush not turning problem:

was vacuuming and rug got caught auto shut off kicked off power to brush. instead of hitting red button to restart brush I disconnected brush to vacuum some hair in Conner. after i reconnected the brush and hit the red button but no power to brush. Light won’t even switch on. Hope you can help

ANSWER : Under the vacuum, there is a guard..remove the guard , either by 2 screws or by 2 clips..there is a belt under the guard..that is connected to the brush..the belt need to be replaced.

My model F5906-900 — problem is the brushes have stoped working… I pulled the brush assembly out by holding the two tabs, and all seems clean and the brush assembly rotates easly… onced the brush assembly is removed. What I did notice is the female driver slot (found in the main assembly unit) that drives the brushes seems stuck..Is that normal when the machine is not hooked up to power? How can I get the brushed going??? it is a good machine, but the brush options is important too it’s ab
ANSWER : (1) Assure the Brush Control on the hood is NOT set to the OFF position.
.(2) Remove the brush assembly by pulling/unlatching it from base on each side.
.(3) Does one of the brushes have the drive pin present? It should be about ¼ inch square, and two inches long. It attaches the brushes to the drive mechanism.
.(4) Remove and clean the intake filter. One the base of the cleaner, behind the brushes, squeeze the two red abs together and pull the panel down to access the screen. Clean the hair/debris off the screen and reassemble.

The power brush floor rug attachment on my Eureka 6997 A Oxygen Canister Vacuum goes on an off as I use it. I replaced the The power cord from the handle has 2 plug in connections:
1 at the handle / upper wand
1 at the lower wand top of the power brush attachment

I replaced the entire wand assembly and it worked great for a year or so and now it’s doing the same thing again. I was told to keep the power switch on the handle set to off when connecting the power brush attachment or it will bu

ANSWER : This is from the prongs not making a good connection causing an arch inside the plugg causing what looks like rust on the plugg. I would try snugging up the connection by squeezing the female section to get a better connection on the prongs when it is plugged in together.

When vacuuming carpet with the electric power brush it will ocassionly , go to zero suction mode and shut off the brush. I have tried to cause it to happen by playing with the joint areas ( handle to tube and tube to power brush) without sucess.
When the problem does occur I just turn the suction back on and power up the brush again at the handle controls.
ANSWER : You gave a good start to giving us good information to help you with solving this problem– But I need a little more information:

It sounds like you have the Electric Motor driven Power nozzle/ Floor attachment– am I correct? (Not the type that has a little vacuum motor down at the floor attachment– Not one that depends upon air flowing thru the unit to power the brush, — am I correct?)

You can control the motor with a switch at the handle– correct?

So here is the question: – when you say “the electric power brush — goes to zero suction” — what tells you that it ‘went to zero suction’?– the little red flag on the vacuum?– or what?

I am suspecting something might be caught up in the floor wand– or at the power nozzle itself– or even in the flexible hose. Do you know how to take the hose off, and place the hand-held end, in the opening in the Miele Vacuum? Can you do that, and clear out the hose first– and then the hose with the want connected?

If they are all clear– we may need to open the floor plate on the floor nozzle, and check for something caught in the air passageway–

Tell us more

Mack B

SEBO POWER BRUSH MACHING
ANSWER : Greetings from GoVacuum,
.
.I wanted to show you where you are able to purchase this great product. I do sell this exact product on our website. If you haven’t purchased the unit yet, let me know, I can offer you free shipping.
.
.The product you are asking about is sold here;
.http://www.govacuum.com/seducacl.html
.
.This is an excellent machine, I personally have this machine, and I have been extremely pleased with
.the way my carpets look after using it.
.
.GoVacuum.com

Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #’s anywhere online, not even partsdirect.com. any help would be great. thanks, david
ANSWER : Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est

Just purchased this Dyson dc24 today. brush doesn’t spin after gettin tangled in a cord. removed the cord from the brush OK.
I have several times:
removed the brush and replaced it OK.
pushed the red button by the brush.
pressed the brush power switch.
ANSWER : When you removed the brush roller dod you examine the end of the actual roller that is opposite from the removal opening. There is a gear that the roller fits over that may have gotten stripped when it became tangled. Check that the gear has not rounded off and look inside the roller bar to see if the area where the gear fits into may have gotten stripped as well. You might try to operate the vacuum without the roller brush installed for a few seconds just to see if the gear turns. When I say gear, it is actually a somall “post” about 1-2″ long that the roller brush fits over. Hope this helps!

SEBO Power Brush
ANSWER : Hi.
.
.Hold A straight edge over brush head EG ruler.
.Now rotate brushes slowly by hant they should just touch the ruler, If there is a gap then brushes need replacing.
.
.http://dysonmanuals.llc.nu/index.htm
.
.Chris.