Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum\015 I just got my shark steam & vac and it says to stick the unit down onto the magnets for the steam option….well mine wont stay on the unit I don’t think that is how it is suppose to be?\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Check if the mop is properly plugged into the outlet and turned on. If it is on and still not functioning, try resetting the mop by plugging it into a different outlet. Add water to the tank if it is empty then try selecting the `STEAM` setting once more.
First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
check the cap of the water tank to make sure it is correctly and securely attached to the water tank. check your water tank to make sure it is securely and correctly fitted in to the body of the garment steamer – incorrect placement of the water tank can block water from feeding in to the body and boiler of the steamer.
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
The spray tip may be clogged. Use a paperclip and insert it into the spray tip to remove a clog. Now plug back in, making sure you are using a working outlet. You will know, as the Ready light will begin to blink when plugged in.
Fill the Tank With Vinegar: Fill the water tank with distilled white vinegar or cleaning vinegar. Allow the vinegar to sit in the tank for at least 30 minutes (up to two hours is best) to help break apart the limescale and mineral deposits. Expel the Vinegar: Turn on the steamer and choose the highest heat setting.
Manually turn your shark robot upside, find and press the power button for about 10 seconds, give it some 10 – 15 seconds, then turn it back on. Your shark robot will reboot and reset in the process. You can also use the Shark Clean app to factory reset your shark robot.
Many people think you need to mop with boiling water to thoroughly clean your floors. This, however, is a myth – rather than always giving you a better clean, the temperature of the water can actually have a negative effect.
For best cleaning results, we recommend replacing your Dirt Grip pads every 3 to 4 months following normal use. As with any fabric, dirt particles, grease friction and repeated washing can cause the fibres to break down.
If your garment steamers hose is forming a U shape, condensation may not be able to flow into the water tank. This will cause the base to leak. If this is the case, please re-position the hose, making sure it is straight, and lift up the head so condensation can flow back into the tank.
There may be a Steam process running already that won`t let a new instance of Steam run properly. Right-click an empty space on your Windows Task Bar and select Task Manager, you can also use Ctrl + Shift + Esc. Check for the Steam Client Bootstrapper and Steam Client Service.
If you checked your brush roll, floor setting, and belt but your brush roll is still not spinning, that means you probably need a Shark micro switch replacement. This small switch tells the vacuums brush when to start spinning.
That depends greatly on the vacuum itself and what you`re using it for. A Shark vacuum that spends its days cleaning pet hair and other everyday messes might last as long as a decade. Investing in the best portable steam cleaner can last for a long time as well if they`re well taken care of.
Mix your purchased descaler or mix 1 1/2 oz. of baking soda with one quart of clean water. Fill the empty tank with this mix. Seal the unit and turn the steam cleaner on so that it begins heating.
What Should I Use? Good quality tap water. If you don`t have issues with hard water stains and buildup, your tap water is good.
Descale your machine – it`s no secret that water contains minerals, which can be left behind (in the form of limescale) in your steam cleaner`s boiler tank and hinder the performance of the appliance.
When you are blocked on Steam, you cannot access the profile or UGC of that character. If that character has blocked you, they will show you unavailable in your friends` list. However, if you go to the Friends tab within the user and he`s playing the game, you`ll notice that he`s online.
Filtered Water
Of course, not all chemicals and unwanted materials are filtered out because the process isn`t the same or effective as the one that distilled water goes through. Because of this, you should avoid putting filtered water in your steamer. The same goes for bottled water, as it is also filtered water.
Sticky floors after steam mopping are often the result of residue from cleaning products that had been used on the floor. Using a dirty mop pad also can cause sticky floors.
So, where does the dirt go when you steam clean? Actually, it doesn`t go anywhere. Instead, the heat and vapour of steam cleaning ensure that all the unwanted substances or stains are fully broken down and easy to get rid of.
The Shark Floor Steamer, also known as the Euro-Pro Shark Steam Mop, is a device for cleaning tile, wood and other hard surface floors that uses heat to lift off stains. It can also be used on carpet with an extra attachment.
Unfortunately, no. Laminate flooring is sensitive to heat and moisture, so the humidity from your steam mop can cause harm. It won`t cause as much damage as a wet mop, but could eventually cause your floor to warp, loosen or peel.
The Cleaning Nozzle is clogged
Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.
Do: Wipe up excess dirt before steaming. Steam mops essentially employ steam to loosen grime, which the mop head then clears away, but there`s no suction element in this appliance. This means that surface dirt will need to be vacuumed or swept up before you begin or you`ll only succeed in pushing dirt across the house.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My Europro shark steam mop won’t steam, light on but no steam.
ANSWER : Hard water deposits. I ran some white vinegar through mine, like a coffee maker, and it worked for a while, but clogged again. So I unplugged it, let it cool and turned it over in the bathtub and squirted a small amount of Lime-Away into the hole where the steam comes out. Let it soak for 5- 10 minutes and it is working like is is brand new.
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of
ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
Shark Steam Mop – Gray/ Purple Vacuum: shark steam mop has water, but there is no steam….
ANSWER : I tried running vinegar through as you would a coffee pot to get rid of hard water scales. This did not work. Then I noticed that the light behind the shark decal on the front of the machine was going off and on. And sure enough as I moved the cord around the light would come off and on. Looking closer I could see the the heat had melted thru some of the cord.I bought mine at Target before xmas last year, throwing away the sales slip after several months so I guess there is nothing I can do about it.
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
Turbine Hi I found out through your site that my turbin is bad on my steam vac and I found some information as well on how to disasemble the steam vac to get to the turbine but still was wondering if there were some more detailed instructions on how to remove the turbin. I am a sigle mom and doing the work on the steam vac myself and need a little more detailed instructions. Please help asap and have a bless day.
ANSWER : There are some screws on the bottom that have to come out so you can remove the top housing. Take the brush block out, there are 2 screws above where it sits. The turbine sits near the front, and in the mid section, 2 screws on the front of it and 2 long screws from underneath, if you already haven’t removed them. Unhook the hoses to it thenpick it out and replace with the new one. ( Some models near the back of the housing, is a catch on each side that you have to unhook to release the top).
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
Shark Steam Mop Won’t Steam
ANSWER : Hi,
Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…
Euro-Pro Shark Steam Mop Problem
Here also is a link to get any of the Shark Manuals that you need.
heatman101
e
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
My shark steam mop heats up but won’t steam. help
ANSWER : Problem: mineral dleposits. Just fixed mine…. DO THIS OUTDOORS. Add 1/2 c CLR to the tank, let sit for an hour, turn on, allow to heat and pump. May have to refill with CLR and repeat. Be persistent, and eventually you’ll blow out a wad of dissovled minerals followed, happily, by billows of steam. Again, do this outdoors and keep the mop pointed away from people, plants and things. (I aimed mine into a cardboard box.) Follow up with a couple of tanks of water and pump until empty to clean out any residual CLR and loosened deposits. (I continued to get some black precipitate through the first water cleaning.) I will add that I began this process first with white vinegar, then with Lime Away..no luck put perhaps I was not sufficiently persistent. Or perhaps it was the sequence of attempts. (Also, do not take off the mop head…the part to which you attach the pads…it’s tough to get off, does not allow access to parts that need cleaning (thought it would, not not so), and practically impossible to get back on.)
.Alternatively, call Shark…they’ll offer to repair for $18 plus $10+/- shipping, or may offer you a new one at “preferred customer” rate of $39.95 plus shipping. Good luck, and please remember to try the CLR outside.
.Alternatively, call Shark…they’ll offer to repair for $18 plus $10+/- shipping, or may offer you a new one at “preferred customer” rate of $39.95 plus shipping. Good luck, and please remember to try the CLR outside.
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
Shark S3501 steam mop will not make steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : I posted this video showing how to clean the heater core of the S3501.
http://youtu.be/S4NglGXVv50
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
Hoover steam vac, brushes won’t rotate, have cleaned filter by brushes, removed brushes and they rotate okay when off steam vac, tried to ajust level for carpet cleaning and brushes still don’t move
ANSWER : There are three things to check when experiencing ‘no spin’ on the cleaning brushes. 1) Check the small pull out filter screen under the machine. It must stay clean for air to pass to the turbine which powers the brushes. 2) Check that the long shaft on the brush assembly is not broken off. This shaft inserts into the turbine motor and powers the brushes. If you’re handy you can replace just the long shaft brush rather than replacing the whole brush assembly. Look for the brush on Ebay 3) If you’re handy you can dissemble the machine and inspect the turbine motor which powers the brushes. In all cases the bearings seize in the turbine. You can often free them up and re-lube them to get more service from them or simply replace the turbine assembly. Don’t throw your Steam Vac out because the brushes no longer turn…you can fix it!
Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
