Shark steam mop wont steam anymore. just gets hot and drips all over the place.

Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The Cleaning Nozzle is clogged

Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.

First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.

Of all the parts to replace on the Shark Pro Steam Pocket Mop, the heating element is likely the trickiest to replace since it`s at the core of the mop. Nonetheless, this guide will make the process a breeze.

Not Plugged In

You will notice a blinking blue light on the front of the device when plugged in correctly. If the light fails to come on then try to plug into a different outlet.

check the cap of the water tank to make sure it is correctly and securely attached to the water tank. check your water tank to make sure it is securely and correctly fitted in to the body of the garment steamer – incorrect placement of the water tank can block water from feeding in to the body and boiler of the steamer.

We have had some customers who have had their steam cleaners for 5-8 years and are still going strong. For less expensive models like the steam mops or handhelds, you should probably expect more like 3-6 years of consistent use.

To prolong the life of your steam mop, we recommend using distilled water in the tank. Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe.

Fill the base with white household vinegar (5 %) so that the heating element is just covered. Put the steam accelerator in place. Close the appliance, connect it to the mains and set the time to 15 minutes. Should there still be a layer visible after the 15 minutes are over, repeat the procedure.

Using the Shark Steam Mop is pretty straightforward. First, attach the mop pad to the mophead, then fill the reservoir with water using the filling flask. Once the steam mop is plugged in, it takes about 20 seconds for the steam to build up, and you`ll hear the mop hissing.

Steam mops work by heating water in a reservoir or tank to about 250 degrees Fahrenheit. The hot steam travels to a microfiber pad through one or many jets that dampen the pad. The combination of steam and damp pad help moisten and break up dirt and dust from flooring.

Tap the mop firmly on the floor a few times to get it steaming again. My mop is still not steaming. Try running a bit of vinegar through your mop. There may be a mineral build-up from your tap water.

To prolong the life of your steam mop, we recommend using distilled water in the tank. Make sure you only add water to the tank – chemicals or cleaning solutions (including vinegar) may damage the steam mop and could be unsafe. For best results, sweep or vacuum your floors prior to cleaning with your steam mop.

Yes, you can use this mop with water only. It comes with a spray bottle of cleaning solution that you can use optionally.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of

ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Shark steam mop wont steam anymore. just gets hot and drips all over the place.

ANSWER : Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Brand new Shark steam mop out of box – plug in, gets hot but steam won’t come out. No steam, just hot mop – should we just give up and send it back?/

ANSWER : Hi,
Some types of water will not work, try bottled spring water…

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Shark steam mop gets hot but does not steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}....
..Hi,
..
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.
.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Shark Steam Mop – Gray/ Purple Vacuum: shark steam mop has water, but there is no steam….

ANSWER : I tried running vinegar through as you would a coffee pot to get rid of hard water scales. This did not work. Then I noticed that the light behind the shark decal on the front of the machine was going off and on. And sure enough as I moved the cord around the light would come off and on. Looking closer I could see the the heat had melted thru some of the cord.I bought mine at Target before xmas last year, throwing away the sales slip after several months so I guess there is nothing I can do about it.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

My euro steam mop is not getting steam to the head, it gets hot but no steam comes out. looks like an ongoing problem with these mops/ can you help?

ANSWER : Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Streaks on porcelein tile from shark steam mop

ANSWER : I have the same problem!!! its driving me nuts, i think its the microfibe pads that do it. I used the kenwood steam mop and it didnt have a microfibe cleaning pad on the bottom of it and it cleaned it perfectly, no streaks! because that blew up i have the monster mop and it streaks every time, i ended up wraping a bath towl around the base and mopping with that on it, dont know what else to do?

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

My Europro shark steam mop won’t steam, light on but no steam.

ANSWER : Hard water deposits. I ran some white vinegar through mine, like a coffee maker, and it worked for a while, but clogged again. So I unplugged it, let it cool and turned it over in the bathtub and squirted a small amount of Lime-Away into the hole where the steam comes out. Let it soak for 5- 10 minutes and it is working like is is brand new.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum