Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

There could be several factors as to why your BISSELL PowerFresh steam mop is not producing steam. First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank.
There could be several factors as to why your BISSELL PowerFresh steam mop is not producing steam. First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Smart mix what is the trick to connecting the smart mix?
ANSWER : Glad you did.

Bissell proheat pro tech model 7901-3 smart mix dial and valve assembly
ANSWER : Turn the knob to the water only, put the piston on the bottom of the knob then turn it slightly so it doesn’t fall off, Start to put the cover on, when it is straight, turn the knob to the water only selection and push the top all the way down. The piston should have gone into the hole and the knob should turn easily.

Replacing Smart Mix knob
ANSWER : The knob itself will only go in one way, What I was talking about is when you put the top cover back on, the knob should be in the water only position. This way the piston (on the bottom of the knob) will go into the slot correctly.

Top tube connection on water pump for Bissell PowerSteamer 1698
ANSWER : It appears to be the tubeing for which you speak of.

The solution in my smart mix will not mix with water and the button just keeps going round and clicks and will not stop on either water or solution.
ANSWER : The smart mix knob is connected to a piston that slides up and down into the automix assembly. This piston has come off of the smartmix knob and left the unit on water only setting. Sometimes the smart mix knob breaks on the bottom side letting loose the piston.
.
.This can be a difficult repair. You have to unscrew the flow indicator window and remove the fan and screen(pay attention to how they come out, most people want to put the pointed end of the white screen down. It goes up.) Place a piece of 2X4, a book, something underneath the machine, between the rear wheels. This will lift the wheels into the air, and keep everything in place when you remove the hood. Take the 6 screws out that hold the hood and lens. As you remove the hood try to do it slowly and pay special attention to any hoses that might try to pull off with it. If you don’t get those hoses back into the right place, the machine will not work. The piston will probably be stuck into the automix assembly when you get the hood off. It is a three inch black cylinder with an O ring on it. If you hold the hood upside down and place the cornered side of the piston into the corner of the housing between the knob and the solution chamber, you should be able to hook the winding on the knob with the piston and then turn the knob to screw the piston down into the windings. It won’t lock into place, but hold it there well enough to put the machine back together correctly.
.
.If you feel like you’re forcing something when putting the hood back on, you probably are, so stop and check to make sure all the hoses are where they are supposed to be.
.
.Good Luck

Ok so, here’s my problem. I have a nintendo DSi and I’m trying to connect it to the internet. I’ve been searching on google on how to connect it. They said that i need wi-fi and some say I don’t need wi-fi and some are saying i need a wirelerr router and some are saying that I don’t need a wireless router. I’m wondering how I should connect my DSi without a wireless router and without wi-fi.
ANSWER : Http://www.nintendodsi.com/meet-dsi-xl.jsp

I think you are trying to do the impossible but try this site.

Rainbow shampooer The soap dispenser on my Rainbow is not dispensing soap when I flip the switch to ‘soap’ mode. All connections are intact. All plastic hoses are intact. What do you think is going on? The soap bottle connects to a little straw that appears to be free of obstruction, however, it connects into a sealed casing on the hose.
ANSWER : The little “wash/rinse” switch on some of the Aquamate units shuts off the soap flow by kinking the tube inside the housing. If you leave the switch in the rinse position (therefore, kinked) when you’re done using it, it may dry in the kinked position. Taking apart the top part of the handle where all this mechanism is and cleaning out the tube by soaking it in some warm water for a while and reshaping the kinked part before you reassemble it may help solve this problem.

Power to power carpet head
ANSWER : Once again remove the electrical connections and clean it and also blow the dirt and then fit it tightly and carefully.if anything broken inside replace it.