Bissell 12005 Spot Bot Handheld Vacuum\015 My spot bot will not spray water from the machine. It will spray from the hose. What is wrong with it?\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Unplug device, remove tanks and flip it over. Check the clear plastic floor nozzles for debris. If they are dirty, unscrew the two screws next to them to remove the nozzle and clean with warm water. Check the suction holes where the nozzles were for any debris and clean them out.
Remove the Tough Stain Brush from the back of the unit, then attach it onto the grip of the hose. Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area. Release the trigger to suck up the dirty solution. Work in small sections until the area is clean.
If you still have reduced or no spray it might mean the pump has lost its prime. To fix this, turn the power off and then back on. Wait for one minute, then depress the trigger.
Your dirty water tank may not be secured tightly. Check the rubber tab on the dirty water tank and press firmly on all edges to secure it tightly. The accessory hose door also needs to be closed securely. Check the door and make sure it is locked in place.
BISSELL steam cleaners use just tap or distilled water for a chemical-free clean.
If you want to clean up a spill right away, but you don`t have any cleaning solution for the Bissell SpotCleaner, then you should try hot tap water. Hot tap water is pretty good at cleaning up fresh spills and most of your easy to clean light dirt and stains.
With just the push of a button, the BISSELL® SpotBot® Portable Spot Cleaner with Antibacterial Formula delivers hands-free spot and stain removal on carpets and area rugs.
To maximize your results, we recommend that you always use only BISSELL carpet cleaning formulas.
Check your hose for any cracks or holes that can cause loss of suction. You may also have a clog in the lower hose. Pull down and at an angle to disconnect. A clog in the main hose could also be the problem.
Add 2 oz of BISSELL 2X Formula to the tank Measure 4 oz (2 capfuls) and pour into tank. Fill the clean water/solution tank with hot (not boiling) tap water to the WATER fill line Add formula to the indicated fill line (approximately 0.5 oz) on the solution tank.
The BISSELL portable and handheld carpet washer are wet extraction models only. Please do not use as a dry vacuum.
If you`re wondering whether you can use the Bissell Crosswave without water, the answer is yes!
Removing the stain for good is easy with a BISSELL enzyme-action product such as Pet Stain Pretreat for Carpet & Upholstery (22 oz). With enzyme-action, enzymes get down into your stain so you don`t have to!
For maximum cleaning results, BISSELL does not recommend using cleaning products other than BISSELL specified in the Big Green. BISSELL formulas are specially formulated with more “active” ingredients, contain no dyes and are designed for use in the BISSELL Big Green.
So, you`ve decided to buy a Bissell Power Steam Pro Carpet Cleaner and are wondering what other cleaning solutions you can use in it. Well, you can use Baking soda, Vinegar, Castile soap, or even Warm Water.
Make a cleaning solution of 1-2 teaspoons Figgy & Co. Home cleaning castile soap with 1L tap water. This is your cleaning solution to use in your Bissell. You don`t need to use more than this amount of soap.
Be prepared for unexpected messes with the convenience of the BISSELL SpotClean. Quickly removes most spots and stains from fibres in carpets, rugs, upholstery, and cars. BONUS Hydro Rinse Tool now included. Be prepared for unexpected messes with the convenience of the BISSELL SpotClean.
Laundry Detergents aren`t Formulated for Carpet Cleaning

Of course not! Cleaning solutions are specifically formulated to clean and not damage the machines they`re used in and the material they`re treating. Laundry soap is designed to be used in washing machines to clean clothing.

Vinegar and baking soda are still the best solutions when it comes to a carpet stain or odours. All you have to do is combine the two substances with warm water and you have a highly effective homemade remedy for carpet cleaning.
All machines function the same fundamentally – they will remove most spots, stains, embedded dirt/grime and odours from carpets, rugs, fabric upholstery, car interiors, and mattresses. It`s mostly the attachment set, and warranty that differs.
Besides getting jammed with dirt and debris, the major problem that cordless vacuums face is a weak battery or failing recharger. Some cordless vacuum batteries are easily replaced while others are not and require that the entire unit be replaced.
This appliance is designed for use on a nominal 120-volt circuit, and has a grounding attachment plug that looks like the plug in the illustration. Make certain that the appliance is connected to an outlet having the same configuration as the plug. No plug adapter should be used with this appliance.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Spot Bot wont spray
ANSWER : Not having the machine spray when you need it is frustrating.
Here’s a quick link to troubleshooting steps to assist you.

My Kirby G3 paint attachment isn’t spraying the paint. I have everything hooked up according to the manual, and it sprays a continuous stream of air, but isn’t sucking up the paint to spray. Sometimes I can get short spurt when I point the unit directly down, but i can’t get a continuous spray.
ANSWER : Mcdevito75 here, Sounds like it”s cogged with paint, the paint is not being sucked up into the Spray gun itself, the air flows thru thr spray gun thru the trigger assembly. Follow the makers cleaning of the spray section of the spray gun. Try running paint thinner thru the spray system. Hpope this helps.

Wont spray i have a bissell pro steam 2x and it wont spray the water out, i have cleaned everything and nothing seems to be working …please help

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems


Need bissell spot bot oners manual – Bissell 12005 Spot Bot Handheld Vacuum
ANSWER : BISSELL User’s Guides can be downloaded at
.On the front page under Customer Service click on User’s Guides and enter the model number of your unit.
.User Guide will be displayed as a PDF file.

Wont spray i have the machine connected correctly but it wont spray water?
ANSWER : Did you press the trigger? If so, does it make any noise or does it not respond at all? If it does make noise, but won’t spray, it could be a clog. Go to the vac shop to have it removed if you don’t know how to take it apart yourself (I wouldn’t risk it)

Spot Bot My spot bot leaks water when it is vacuuming up the cleaning product. Where can I get in fixed? I live in Bedford Texas,near Fort Worth. Zip 76021
ANSWER : Their customer service # is 1-800-237-7691 and they can tell who to call for service. You can also go to, there is a link for service centers, just put in your zip code and a list will come up.
...BISSELL Service Center Locator..Please enter your ZIP Code: . ....CANTRELL SUPPLY INC. ....2918 SOUTH COOPER F-2.ARLINGTON TX, 76015 .(817)465-9121.11.1 miles ..BRANCH VACUUM & JANITORIAL ...SUPPLIES, L.P..12895 JOSEY LANE #122.FARMERS BRANCH TX, 75234 .(972)247-5838.15.7 miles ..FORT WORTH SHAVER & APPLIANCE ....1900 MONTGOMERY STREET.FORT WORTH TX, 76107 .(817)335-9970.16.3 miles ..AMERICAN VACUUM CO. ....5545 W. LOVERS LANE.DALLAS TX, 75209 .(214)357-8419.18.2 miles ..KIRBY CO. OF DALLAS ....4118 MAPLE AVE.DALLAS TX, 75219 .(214)526-7951.19.0 miles ..BRUNER KIRBY CO., INC. ....5608 MC CART AVE..FT. WORTH TX, 76133 .(817)292-8421.19.4 miles ..VACUUM DEPOT ....5359 WEDGEWOOD.FT WORTH TX, 76133 .(817)292-4472.19.4 miles ..MODERN AMERICAN MAINTENANCE ....8545 CAMP BOWIE WEST.FORT WORTH TX, 76116 .(817)244-0919.19.9 miles ..ALL VAC, INC ....4451 LOVERS LANE.DALLAS TX, 75225 .(214)521-2558.20.2 miles ..KIRBY CO. OF DESOTO ....104 N. HAMPTON ROAD.DESOTO TX, 75115 .(972)223-4029.23.8 miles ..AAA VACUUM CLEANER CO. ....9845 WALNUT HILL LANE.DALLAS TX, 75238 .(214)348-1620.25.0 miles ..BROADWAY VACUUUM ....4401 BROADWAY BLVD.GARLAND TX, 75043 .(972)240-7971.31.1 miles ..THE VACUUM DOCTOR ....500 NORTH GALLAWAY – STE. 10.MESQUITE TX, 75149 .(972)329-1104.31.4 miles ..CHAMPION VACUUM, INC. ....8809 LAKEVIEW PARKWAY #128.ROWLETT TX, 75088 .(972)463-2755.34.3 miles ..VACUUM & SEWING DR. OF TERRELL ....811 WEST MOORE, SUITE E.TERRELL TX, 75160 .(972)563-0330.49.8 miles . . var prm = Sys.WebForms.PageRequestManager.getInstance();. prm.add_initializeRequest(resizectl00_ctl00_cphAllContent_cphContent_pcaMain_ctl02_ctl00_pnlActivity);. prm = null;. function resizectl00_ctl00_cphAllContent_cphContent_pcaMain_ctl02_ctl00_pnlActivity() {. var elAct = $get(‘ctl00_ctl00_cphAllContent_cphContent_pcaMain_ctl02_ctl00_pnlActivity’);. var bounds = Sys.UI.DomElement.getBounds($get(‘ctl00_ctl00_cphAllContent_cphContent_pcaMain_ctl02_upServiceCenter’));. = bounds.width + ‘px’;. = bounds.height + ‘px’;. Sys.UI.DomElement.setLocation (elAct, bounds.x, bounds.y);. }. .......Locating Stores… .progressbar.gif

Bissell 9500 proheat 2x wont spray liquid to the floor

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems


My carpet cleaner will not spray. Maybe a little thru the tool but not enough pressure to SPRAY
ANSWER : Thanks to many others who have posted on similar problems — water.and/or solution sprays through the handheld tools, but not through the.main machine.

As others have suggested, I removed the water.reservoir, which exposes the 2 main water sprays mounted above the.rollers. Using, pliers, I carefully slid the clips back. Gently but.firmly removed the two red nozzles.

Elsewhere I have read.suggestions to just do one nozzle at a time. However, I found out that.if you remove both red nozzles, you can then blow through one side will come out the other. In my case, that dislodged a nice.collection of crystal-like chunks (guessing it may be crystallized.residue from the cleaning solution).

There was also a bit of.blockage in one of the red nozzles, which I cleaned out. Make sure you.can blow through both of them with little resistance.

Reassemble:.Push red nozzles back into hoses. Using pliers, reposition sprung clip.back over the red nozzle. Snap nozzles back into place. Refill tanks.and power it up.

In my case, that resolved the problem of no sprays from the main machine. Sprays like new now. Hope yours does too!!

p.s. Make sure you do give it about a minute after you turn it on before you try spraying. If the pump is not allowed sufficient time to prime, you may not get proper flow.