Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 Bissell Proheat 7901 carpet shampooer has continual leakage from the spray heads after the trigger has been released. In disassembling the machine, the tubes to (before) the switch (in the handle) are charged, but all tubing between the switch and the spray heads is empty. Is there something about the switch that would be allowing air into the line? Or the tubing at the switch? Or. . . ?\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

– Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 I dis-assembled the floor unit housing on my Bissell 7901 steam cleaner in order to replace a part and on reassembly I can not get the Smartmix rotary switch to line up with the fluid plunger. Any ideas?\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 I am cleaning my bissel and in order to thoroughly clean it, and replace the small belt which is broken, I need to know how.Thanks\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 Where can i get a new manual?\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 When I removed the pump to this unit to go buy a replacement I wrote discriptions of where the disconnected hoses went. Apparently my descriptions were poor. Now after switching the hoses all around I am not sure where they go. How can I find out where they are supposed to be connected?\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

– Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

– Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 Where does the water and cleaner get put in? together or separate?\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

\015 Trying to find a manual that will give step by step intructions for replacing the power brush belt on a bissell proheat 1699, 7901, 8910 series steam cleaner\015 – Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum