Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If your dyson vacuum isn`t turning on, don`t panic – there are a couple possible causes. It could simply be that the vacuum overheated and shut itself off. If that is the case, wait 24 hours and turn it back on. However, another problem with dysons are failed power switches.
Check for a clogged hose or filter; unclog the hose and replace the filter. Wait 45 minutes for the vacuum to cool; then plug in the vacuum. Turn the power switch to the “I-On” position to start the vacuum. If the vacuum still does not start, contact Customer Service at 1-800-798-7398.
One of the first things to do when your Dyson vacuum cleaner keeps starting and stopping is to empty the bin. It may be full, or the machine may simply perceive it as too full to continue working. Dyson vacuum cleaners require constant airflow through them to work, and a full bin can stop this from happening.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on.
The problem may lie in your vacuum cleaner`s adapter, charging dock, or battery and the electrical outlet. Try plugging your vacuum cleaner in to another outlet. If it is now working, the problem was in the first outlet that you have used. You should contact a certified electrician if you need to fix that outlet.
Besides getting jammed with dirt and debris, the major problem that cordless vacuums face is a weak battery or failing recharger. Some cordless vacuum batteries are easily replaced while others are not and require that the entire unit be replaced.
To reset your shark vacuum, put the Power button in the On-Off position and keep the vacuum unplugged. If necessary, clear the hose. Once it has cooled completely, plug the vacuum back in again.
Manually turn your shark robot upside, find and press the power button for about 10 seconds, give it some 10 – 15 seconds, then turn it back on. Your shark robot will reboot and reset in the process. You can also use the Shark Clean app to factory reset your shark robot.
Over time, all batteries are subject to degradation. So if your run time has declined when the machine is not in Max / Boost mode, it might be time to buy a new battery. All our machines come with a 2-year initial warranty that includes the battery.
When your Dyson no longer powers on even after charging the most likely cause is a damaged battery. This means the battery will no longer hold a charge and will need to be replaced. Once a new battery is purchased you can learn how to replace it by visiting our battery replacement page here.
3 cleaning modes Power button Press the power button to start cleaning. Lean to clean Lean handle back to start a clean. Leave upright to direct suction to the wand. The wand or tools are attached to the end of the hose.
The first thing to establish is that the battery is charging correctly and that it is fully charged before you use your sweeper. You should also check for any obstructions, such as blockages and debris, which may be preventing the brush bar from turning freely and causing the sweeper to operate less efficiently.
Most problems arise because of a blockage – if not a dirty filter or cyclone unit, then something could be caught in the wand or the brush bar. Once again, the lack of suction could be caused by a dirty filter or a blockage somewhere in the vacuum`s system.
Locate the brush reset button on the lower back right of the vacuum. Press the button to reset the brushroll To ensure the brush has been reset, plug the vacuum back into the electrical outlet.
Make sure the power cord and the plug are not damaged. If either are, contact our Consumer Care team. Make sure the outlet works by plugging in a cell phone charger or small appliance. If it doesn`t work, check another outlet.
A damaged vacuum hose, clogged motor air filter or bad suction motor can cause the vacuum cleaner to shut off during use. A tripped overload on the vacuum suction motor can shut off the vacuum cleaner during use. If your vacuum has a reset button, push it; if the vacuum seems hot, let it cool off first.
A strong odor from the shellac that coats the copper coil windings is an indicator that the motor is about to or has burnt out. If the motor is still running, even if it turns on and off by itself as it is heating and cooling, you can still run the motor until it gives up for good.
The most common problem with a vacuum cleaner is also the easiest to remedy: clogs in the hose or attachments. Also the electrical cord, motor, switch, fan, brushes, and motor bearings can all need repair or replacement. The drive belt may need replacing; and the attachments, hoses, and filters may need unclogging.
If you checked your brush roll, floor setting, and belt but your brush roll is still not spinning, that means you probably need a Shark micro switch replacement. This small switch tells the vacuums brush when to start spinning.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
It`s possible there`s a power consumption issue, with there just not being enough residual charge to run the machine. A new battery should fix this. My other thought is that it`s overheating. If too much power is pushed through the motor, which MAX power does, it could stop after a few seconds if it become hot.
It`s possible there`s a power consumption issue, with there just not being enough residual charge to run the machine. A new battery should fix this. My other thought is that it`s overheating. If too much power is pushed through the motor, which MAX power does, it could stop after a few seconds if it become hot.
Over time, all batteries are subject to degradation. So if your run time has declined when the machine is not in Max / Boost mode, it might be time to buy a new battery. All our machines come with a 2-year initial warranty that includes the battery.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Won’t start. My son was using the vacuum & Didn’t change the bag. The vacuum was making the full bag smell, but the light was’t on & it didn’t stop. I stopped him, changed the bag, checked the filter, closed the compartments & turned on the vacuum. Nothing happened. I checked to be sure that it was plugged in, that wasn’t the problem. I’ve let the vacuum “rest” for several days, It still won’t start. Any suggestions?
ANSWER : There is a reset button at the back of the powerhead. The user manual can be downloaded from the electrolux website, although I didn’t find it very useful. There was some info on how to change the powerhead drive belt.
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
Problem starting Sometimes will not start at all. Sometimes will do a quick start and stop. Other times it starts and runs fine????
ANSWER : This can happen if you have an intermittent short in your cord. Try plugging it in and then wiggling the cord around where it goes into the body of the vacuum with the switch set to “on.” (If you’re not sure whether it’s on or off, just click it back and forth occasionally.)
.If the motor kicks on there’s a short, which usually requires a cord replacement. If that’s the case, it’s a relatively simple fix for most dyson models.
.If not, you could have a short in your switch or somewhere else in the electrical system of the machine.
.
.-R
.If the motor kicks on there’s a short, which usually requires a cord replacement. If that’s the case, it’s a relatively simple fix for most dyson models.
.If not, you could have a short in your switch or somewhere else in the electrical system of the machine.
.
.-R
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
Press the power button on – good got a green light (new battery)
press the clean button – got a green light
press the clean button – got a green light
iRobot runs for a couple of seconds and stops, then starts, then stops. After two or three times I now have a red light on for the Status.
All of the wheels seem to be clean. I used compressed air to clean the underside. But still have the start stop problem.
ANSWER : How many times does the red light blink before it pauses?
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
My Singer Izek sewing machine starts and stops and wont sew continuously. When I push down the pedal it sews about 2 inches then stops and light starts flashing, I have to let off of the pedal and push it again, over and over. It did this once before for awhile and then just started sewing right for awhile and now its started it again. I’ve checked everything.
ANSWER : If it’s not the thread and not the pedal then it’s definitely a power problem. You need to replace the power cable and then check again the functionality.
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
My roomba backs away from docking station then starts to go then stops and spin left then stops and spins right after a few times stops and beeps many beeps. What is the problem
ANSWER : It sounds like the 9-beep error. You can fix it by buying a repair kit from www.eesolutions.ca. I fixed mine in about an hour and a half.
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
My Dyson DC07 vacuum started to run slower after being on for a little while and then would run normally again. I have switched on today and it has just stopped. When I push the start button, on occasions it almost starts and then doesn’t. I am wondering if there is a problem with the switch and if so how can it be fixed?
Thankyou.
ANSWER : The motor running slower was the motor starting to burn out. The “almost start” is the brushes making intermittent contact with the armature in the motor. .
.Your machine needs a new motor Pam.
.Your machine needs a new motor Pam.
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
Won’t start I was Sweeping & the Blanket Cornor got caught. Now the sweeper won’t start
ANSWER : Did you verify that the switch did not get moved to BARE FLOOR rather than CARPET. If it is not on CARPET the brush will not spin.
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
When I turned on the sweeper it would not start. I put a different power cord on it and it worked fine. now it won’t start but the light on the brush and the bag full will flash when i turn it on and off but it wont start. i have 2 of these doing the same thing. do you have any idea what could be wrong. I have checked for clogs but have found none. Bob
ANSWER : Its sounds to me like the computer board inside the machine has gone bad. Keep in mind that the filters in these machine do need to be replaced regularly to keep the vacuum working correctly. Any good vacuum shop should be able to fix your problem. Reguardless of what they might tell you there these really are one of the best machines on the market and definatly worth having repaired.
Read Full Q/A … : Euro-Pro Cordless Bagless Upright Sweeper – Blue/Gray
