the wand release button on my actual Dyson…..the manual pictures don’t look like the parts on my Dyson….I don’t have a hose with a wand release button….the hose just goes straight up inside the handle….Can someone help me? Thanks 🙂
Dyson DC07 Bagless Upright Cyclonic Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

The Dyson DC07 was introduced in 2001 with brand new Root Cyclone technology.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
Most cases of a jammed or stuck brush bar are quick and easy to fix, simply pulling the debris gently from the brush bar. Alternatively, if you need to clear a problematic blockage, you can take the brush bar out of the housing easily, for quick maintenance.
There are two filters on a DC07, the first is the pre-motor filter, which are washable and is recommended by Dyson to be washed at least every 6 months.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
Depending on your Dyson model, you may be surprised by the amount of dust and debris you`ll find inside it. So, `detach the hose from the wand, then clean its insides using a cloth pushed inside with the help of a broomstick or anything similar. `
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
Hot environments speed up battery aging. So it`s best to avoid cleaning the car in hot weather or leaving your vacuum in rooms that experience direct sunlight for prolonged periods. The same goes for cold porches and garages in winter.
Give it a break

By letting the battery run down to empty at least once a month, you`ll help to prolong its life.

Dyson DC07™ Upright vacuum cleaner (Clutchless)
The Dyson DC07 Animal has been designed specifically with pet owners in mind. It comes complete with a HEPA filter, a 3.5 litre bag capacity and a clutch that makes it perfect for all floor types.
TL;DR: On May 22, Dyson announced a new suite of home products(opens in a new tab) including upgraded cordless vacuums, air purifiers, and a robot vacuum. As of June 6, the Gen5 vacs(opens in a new tab) are the first models up for public purchase. Dyson is entering a new era in 2023.
TL;DR: On May 22, Dyson announced a new suite of home products(opens in a new tab) including upgraded cordless vacuums, air purifiers, and a robot vacuum. As of June 6, the Gen5 vacs(opens in a new tab) are the first models up for public purchase. Dyson is entering a new era in 2023.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

This is embarassing, but I have just looked at the Dyson DC07 manual and at my Dyson for about 20 minutes, and I can’t for the life of me find the wand release button on my actual Dyson…..the manual pictures don’t look like the parts on my Dyson….I don’t have a hose with a wand release button….the hose just goes straight up inside the handle….Can someone help me? Thanks 🙂
ANSWER : Hi the wand release button is located directly above the the Cylinder release button. The wand release button looks like the picture below. In order to releease the wand you must firstly make sure the Electrical cable is not wrapped up for storage. So unwrap the electrical cable. then find the item as in the picture. Press this button in and at the same time lift the wand. This will realease the wand from the spine of the Dyson. dumfriesdon.jpg

Lost Part I have a 6.5 hp 18 gallon shop vac ultra pro. There is a part that goes into the inside of the tank and screws into the collection hose that attaches it to the tank. This part accidentally got thrown away when someone dumped it and now I cannot attach the hose to use the vacuum. Can this part be purchased separately?
ANSWER : I found a manual online for the shop vac and found the part number. Did locate part online.
.Thanks,

HI, I’m trying to find a part for a Sharp upright vacuum. Its the back part of the handle where the cord is stored. I have taken it off but can’t find any part # on it. The model number for the vacuum is EC12TWT4. I was thinking that if I could find a free owner’s manual, that would give me the part # and then I could look for it on the net.
ANSWER : Any vacuum repair shop should be able to get it

We replaced the short hose that connects the sucking part to the hole where the dirt goes underneath my Dyson DC07 but now the side of the hose that needs to attach to the machine falls off.
ANSWER : I know the hose you are talking about it is called the DC07 internal hose. Over time the ends can stretch and perish which will mean you need to purchase a new one. Amazon or VacuumSpot will be able to help you out here. If you have some gasket adhesive you could use some of that on the end (use gasket adhesive not glue because gasket adhesive can be removed whereas glue will make a mess).
I will also post a video which show how to properly dismantle this part of your dyson in case you may have made a assembly error.

I am trying to find a Manual for my dyson dc07 to find some replacement parts. I have the original dc07. but having pulling up a manual
ANSWER : You can view the manual here:

Dyson DC07 Manual

I have a Dyson DC07 animal ( purple). If you are standing behind the vacuum I am missing the lower righthand connection…therefore whatever is suctioned up comes out at that point just over the back wheel. I would like to purchase a replacement for this part. In the manual I believe this part is labeled as C. Can this part be purchased separately ?Please Help….
ANSWER : Hi there SmartAlec from NelsonVacuums.com.au i am not sure if you are based in australia but if you are you can contact me and ill supply the part for you no hassles!. Happy Vacuuming.. 🙂

I’m using Miele Medivac vacuum and I just sucked in a small plastic eye drop container by accident(I sometimes take off the brush part to **** in ‘small enough’ articles). And it is jammed in the part where the plastic hose connector bends. I think I can take it out if I can just disconnect the long necked plastic hose connector that connects the metal wand part and the hose part.

Is it designed to be disconnected or should I not even try it?

ANSWER : I love the fact that the filter bleeped out s.u.c.k ha ha!

Hoover U5344-900 – where can I find a parts manual on line? All I seem to find is the part numbers with no pictures – no help at all.
ANSWER : Hi There,
.
.Here’s a parts diagram for your Hoover U5344-900. This will give you the drawings and the part numbers for all of the parts on your vacuum cleaner. If you need to purchase any of these parts, please feel free to contact us, we’d be more then happy to order anything for you. If you have any questions, please use the repair clarification request form here on Fixya.
.
.Here’s the Parts Diagram:
.http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/hoover-U5344-900-parts-schematics.pdf
.
.I hope that this information was helpful to you. If you found this helpful, please be sure to rate the repair and leave feedback. This is greatly appreciated.
.
.Thanks,
.
.Chris J.
.GoVacuum.com
.http://www.govacuum.com/info.html