How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
The most popular and well-known sewing machine brands are Singer, Brother, Juki, and Janome. These brands make machines in the most popular pricing categories for home sewers.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
The machine probably requires about 2 amps or less under normal operation.
Being a 3.0 amp slow blow fuse, it will withstand short bursts of extra current when your machine gets temporarily overloaded.
Just make sure the machine is properly lubricated and runs freely. The fuse will definitely blow if your machine should get jammed or something like that.
I think I know where I can score some. Cost of postage only. 🙂
Email me if you like.
Subject: T3.5/250v glass fuse
Sorry about the catagory…but you do not have sewing machine on list.
.I have this machine. I use it for my heavy sewing, as it will go through anything. I would be happy to copy the manual and send it to you for copy costs. Just let me know. I would love to know what knowledge you have gained about this machine. It does not appear to be an easy machine to find info on, may not have produced a lot? I had no idea it was not a European produced machine.
We have brought the Bernina in, set it up, oiled it as specified in the manual, with the original sewing machine oil. We have correctly threaded the machine and the bobbin thread is up.
When we press on the pedal to sew, the machine gets electricity and buzzes
From what you describe there can be only 2 causes…Either the machine is still stuck ..and the motor buzzes cause it can not spin it ..and in this case it needs to be oiled more..and be spun by hand until it moves well and free…and after that it will work ..or during the storage ..from condense or so ..the motor is stuck ..and needs to be checked…In this second case ..it probably need to be oiled too (the motor ) ..and the coils changed..
Have a nice day ..!
1st: Sewed one inch OK; moved fabric and it stopped sewing, motor made thudding noise. When push-button (NOT pedal) is used, gives error E6,
consistent with motor noise.
2d: In order to check threading had to manually PULL bobbin case toward me or it was UNDER needle plate. Cleaned a fair amount of dust out. Reinstalled bobbin, etc., per manual, rethreaded.
3rd: Will sew 2-3 stitches, then packs up again just like in 1st instance above. Have st
.The manufacture recommends using only “#69 Bonded Nylon Thread”
.You should have a 18 to 20 gauge needle for that size thread. Needle type is 135×17
.To be completely honest, these machines look like they are 20 to 30-year-old designs meant to be “store branded” machines (Woolworth, K-mart, Sears, …). As demand at these types of stores dried up, they may have tried (successfully) to remarket them as “tuff” machines. Almost all older machines used all metal gears – it doesn’t make them tough or high quality. The poor level of technical support and documentation would upset me too.
.I really hope the recommended thread and needle help with your problem.
Make sure your needle matches your application. example: heavy denim needs a heavy needle (90-100) instead of the “universal” needle that usually comes with a machine.
Also make sure that when you thread your machine that you have the pressure foot in the up position. Many machines release the tension discs in this position allowing for proper threading. Also make sure there is no fluff, lint, etc., in your tension areas.