Vacuums\015 I have a eureka boss 4d.\302\240 The suction works, but the motor that turns the belt is not working, any suggestions\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
If your vacuum cleaner has lost suction power, it`s time to empty the container. Vacuum cleaners come with various foam or mesh filters. These might get clogged over time if not cleaned or replaced properly. This will cause your vacuum to lose suction.
All vacuum cleaners operate based on air flowing from the opening at the cleaning head or tool, through the vacuum cleaner and the bag and/or filter system and then out the exhaust port. This airflow is created by the vacuum motor, which also may be referred to as the suction motor.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
One of the easiest ways to increase vacuum cleaner suction is to empty the dust bag or container. Dust containers need to have enough space for airflow, otherwise, they could get clogged and have less suction power. Regularly check your dust compartment and empty or change it when it`s already 70-80% full.
Vacuum cleaning is one of the household chores that may leave us with pain. That is because while using a vacuum cleaner, weight is transferred back and forth between the back and the front lower limbs. Vacuum cleaning also involves bending which indirectly puts pressure on the lower back.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
The type of dust collector or vacuum cleaner bag and the size of it affect the suction power of a vacuum. When a vacuum cleaner bag has an extra filter, the vacuum needs a higher suction power. That way, the air will flow outwards through all the filters.
vacuum, space in which there is no matter or in which the pressure is so low that any particles in the space do not affect any processes being carried on there. It is a condition well below normal atmospheric pressure and is measured in units of pressure (the pascal).
Suction Power
This is an indication of how good the vacuum cleaner is to clean – i.e. the work to be done. The suction power is measured in Watt (W) and is typically between 250 W and 450 W for machines with 1 motor.
The most common problem with a vacuum cleaner is also the easiest to remedy: clogs in the hose or attachments. Also the electrical cord, motor, switch, fan, brushes, and motor bearings can all need repair or replacement. The drive belt may need replacing; and the attachments, hoses, and filters may need unclogging.
If the filter bag or canister is too full, it cannot pick up any additional particles and will simply jam or the motor will overheat and shut down. So, when you suspect your unit is about 75 per cent full, empty it!
So, the usual areas that cause suction loss include the wrong height setting, stuck rollers, a faulty gasket, a broken vacuum belt, a filled bag, or a clogged hose.
Take your time. Vacuuming slowly will allow your machine to suck up more dirt and dust, and ultimately get your rugs and carpets much cleaner. Slow vacuuming allows the brush to agitate the carpet properly and suck up the unclean bits that emerge.
Sometimes pieces of string or other objects get wrapped around your vacuum`s rotating brush or around the wheels of the vacuum. Unplug your vacuum. Turn it over and have a look at the wheels and brush. If you see any pieces of string or objects lodged there, remove them.
Just like the slouching tendency, keeping your spine rigidly over-extended while vacuuming is potentially damaging. In this case, though, it may irritate spinal arthritis-related issues. Or, it can intensify your normal low back curve, which, in turn, may lead to extra tight (and painful) back muscles.
If you don`t vacuum your carpet, the dirt will break down carpet fibers and create a breeding ground for dust mites and bacteria. In addition, your home will begin to smell musty from the dirt, mites, and other organisms settling into the fibers.
A vacuum cleaner gets power from a regular electrical socket, with the average upright design requiring between 450 and 3000 watts. However, the most often used versions use around 1400 watts, equivalent to approximately 1.4 kilowatt-hours (kWh) of electricity each hour.
Vacuuming will only remove some of the dirt and dust on the surface of your carpet. Even vacuum cleaners with the most powerful suctioning action will leave things beneath the surface such as dust mites, bacteria, dead skin cells, pollen, pet dander, and allergens.
Vacuums cleaners can smell from for various reasons; pet dander, moisture was sucked up… The most common cause is old dirt sitting stagnant in the collection chamber, bags, or filters. Vacuum bags should be changed every four to six weeks or once full.
Blockage – when a vacuum cleaner becomes unusually loud, it is normally because of a blockage of some sort. This is a problem that is easily solved by turning off the cleaner, check for blockages in the pipes, and remove them. You can also check and empty the canister to remove any possible blockages there as well.
Max(4000 PA): It can deeply clean the place that needs cleaning, dust cleaning is up 80%, garbage collection is up 30%, and the cleaning times are up to 80 minutes.
The Roborock S5 offers 2000Pa of suction power. Pa is short for Pascal Pressure Unit. The higher the number, the higher the suction power. Could you imagine what 2000Pa means? It means that the Roborock S5 has enough suction to pick up AA batteries off your floor.
Ultimately though, a suction force of 1000 Pa or more serves as the general rule-of-thumb benchmark for quality vacuuming performance. I did my research to compare the suction power of current vacuum cleaners, from robot vacuums to regular vacuums.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Vaccum problem I turn the vaccum on and it does not run but the light on the vaccum works. Bissell bagless vaccum cleaner
ANSWER : No sound at all? or the motor runs but no vaccuum?
.did it stop while using it? might have overheated due to dirty filters… strange that the light comes on but no motor at all… that would suggest to me that the motor is shot…
.
.Here is a link the the manual.. there is no reference to any user accessable fuse or breaker…
.
.
.Peace,
.did it stop while using it? might have overheated due to dirty filters… strange that the light comes on but no motor at all… that would suggest to me that the motor is shot…
.
.Here is a link the the manual.. there is no reference to any user accessable fuse or breaker…
.
.
.Peace,
Read Full Q/A … : Vacuums
The steam mop was only used 3 times.stopped working. It has now stopped working altogether. I have only had it for a month. I did not save the receipt because after the third time working I thought it was okay. I am very disappointed and have a hand shop vac of Sharks which has been working for a year. I have been discouraged from buying another one of your products now that the steam mop has quit working after 3 times. I followed the exact instructions how to use it. Model S3101/ 120V 60HZ
ANSWER : Hi,
Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…
Euro-Pro Shark Steam Mop Problem
Here also is a link to get any of the Shark Manuals that you need.
heatman101
,/../m,/.
Read Full Q/A … : Vacuums
I have a 2 fluorescent light fixture in my bathroom. The right side light quit working. I took the starter out of the left side and put it in the right and it worked. Starter, right? I bought a package of 2 Leviton starters FS 2 15w. They didn’t work. Thinking bad, I returned it for another package. Still not working. The original starter is a Sylvania FS 2. Is it possible to have FOUR bad “new” starters? Do I need to replace it with the EXACT same starter? This light fixture is 38 years old. No
ANSWER : It is not likely that you had 4 bad starters.I assume you have more modern lights in it too(not 30 yrs old).Here is a link to Sylvania.It may be just that it requires certain something(who knows what)that only Sylvania has.It seems strange because they are all basically the same and a generic one seems like it would work.I also googled flourescent light starters and under one that talked about operation,it did refer to some older models.But like I said,it probably has newer lights so who knows what the heck.Well,here you go.You may also just want to call Sylvania and ask where you can find a replacement instead of paying $5 to ship $2 worth of parts.
.http://www.sylvanialightbulbs.com/sylvania_starters_accessories_ballasts.html
.Good luck! Greg
.http://www.sylvanialightbulbs.com/sylvania_starters_accessories_ballasts.html
.Good luck! Greg
Read Full Q/A … : Vacuums
I have only had my shark steam mop for about a month and only used it twice. I tried to use it yesterday and it would not work. The green light came on and it worked for maybe ten seconds, then it completely shut off. I tried switching outlets and draining the water but nothing worked. It still doesn’t work today either. What do you think is wrong? Does this product have a warranty?
ANSWER : Yes has warranty call Shark/europro.
Read Full Q/A … : Vacuums
Rainbow vaccum I have a rainbow vaccum and it stopped working. The on and off switch may not be working. I am not sure how to change that switch?
ANSWER :
Make sure the bowl has the pin on it. The Vacuum has switch in the bottom that keeps the Vacuum from running if the bowl in not on or the little pin is broken off.
..
..
Ralph Wakeman
..
Read Full Q/A … : Vacuums
Water and cleaner not coming out, The machine is only 6m old and was working fine, I have cleaned every where I can to see if there was a blockage but nothing is working. The heater is working, there is a suction but the water and soap will not realease when triger is pulled. it will not work on on the tool spay.
ANSWER : Check the complede length of the hose. You may find a crimp in the most inconvenient place. You say you cleaned everything … can you blow through the hose where the cleaner comes out? (don’t drink anything!)
Read Full Q/A … : Vacuums
Water is not being discharged. I have filled the reservoir that holds the carpet cleaner fluid And I have filled the water container. I know how to use the cleaner, it has always worked, But now, no water is being discharged to the carpet. I turn it on, squeeze the trigger, but nothing comes out. The wheel that is suppose to spin (to indicate that water is being discharged) is not spinning. Everything else works. I.e. the suction works, and the hand held accessories work.
ANSWER : That means that the pump belt is worn and it needs to be replaced. You can get a replacement belt and view the manual here:
Read Full Q/A … : Vacuums
How can I get my DAB radio working again?
I have a Sony XDRS100CD with DAB radio. The DAB radio has stopped working although I can still use the CD and get FM radio. The unit has a readout on the front that usually shows the time and this stopped working too, presumably because it got the time via the DAB radio.
The unit works from mains and batteries although I have only ever used it on mains.
I have a Sony XDRS100CD with DAB radio. The DAB radio has stopped working although I can still use the CD and get FM radio. The unit has a readout on the front that usually shows the time and this stopped working too, presumably because it got the time via the DAB radio.
The unit works from mains and batteries although I have only ever used it on mains.
ANSWER : I have the same problem… did you ever get a fix..
[email protected]
[email protected]
Read Full Q/A … : Vacuums
