Bissell Upright Vacuum – The Pet Hair Eraser 1 ea Vacuum\015 My Pet Hair Eraser vacuum doesn’t vacuum with the regular floor attachment on. It doesn’t seem to pick anything up! I’ve cleaned out all the hair and pet fur and the rollers seem to roll fine- but it’s hard to push now and it doesn’t vacuum anything up!I’ve changed the belt, I’ve cleaned the filters, I’ve cleaned out all the hair and it just doesn’t work! It sucks up fine whenever I take the regular attachment off- but there’s only so much I can do to clean my place with a hose!\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
The suction power indicator tells you when the air flow in your vacuum is reduced due to dirty filters or a clog in the hose. The suction power indicator will remain green until the airflow is reduced.
The BISSELL® Symphony™ All-in-One Steam Cleaner combines a vacuum and steam cleaner into one machine, so you can enjoy the benefits of steam cleaning while also vacuuming your floors. Steam mops, like the Symphony™, let you clean your hard floors without a mop and bucket or harsh chemicals – all they take are water!
A: Yes it can be used as a vacuum without water.
Does the product truly have an advantage for tackling pet hair or does it equate to additional accessories?” Generally, vacuums designed with pet hair in mind are made with unique bristles or special filters for dealing with fur and dander; they often come with accessories that can be used to remove pet hair from the …
Vacuum and wash floors at the same time and in one easy step! A must-have for homes with or without pets, BISSELL® CrossWave® Pet Pro Multi-Surface Cleaner (with Tangle-Free Brush Roll and innovative Pet Multi-Surface Formula) cleans better than a sponge mop and bucket – and in less time.
Good question, this cleaner is for water extraction so it`s not designed to be used for dry vacuuming. If you needed to spot or deep clean every day then you certainly could with this cleaner.
What is a Good Suction Power for a Vacuum Cleaner? An upright cordless vacuum cleaner should have at least 100 air watts to effectively clean a variety of floor surfaces, with the best Samsung vacuum cleaner reaching up to 210W*.
It is obtained by measuring how many inches up a tube the vacuum motor`s intake can pull up, or lift, the water. For the Water Lift test, there is no air moving through the motor. It is a sealed suction measurement to find the pure suction force of the motor.
Unplug and check to see if your clean tank is seated properly. Also, remove the dirty water tank and make sure there are no clogs in the hose below it. Remove the filter and clean both the screen and filter of any build up or debris and empty the tank before replacing it.
For most models, the lowest setting is optimal for bare floors or thin carpeting. The middle setting offers the best suction for slightly fuller carpets. The highest setting is best for plush carpets or area rugs.
BISSELL® carpet cleaners are ready when you need them. From upright carpet cleaners to portable carpet cleaners, BISSELL makes spot and stain removal a cinch.
If you`re wondering whether you can use the Bissell Crosswave without water, the answer is yes!
Vacuuming should always be followed by wet mopping to eliminate any bonded soils. Wet mopping should also be used on an as-needed basis to clean up spills. Floors are burnished on an interim basis for deeper cleaning.
A self-emptying system provides a dock for the robot vacuum to rest in that not only charges the device, but also connects it to a series of vacuums that pull the dirt and debris out of the dustbin and into a much larger storage bin. Think of it like the bag on a traditional vacuum cleaner.
Most robotic vacuum cleaners use one or two spinning brushes along with a rolling brush. These brushes collect dirt towards the center of the room, where the electric motor creates suction. Dust, hair, and everything else collected by the vacuum cleaner is sucked and stored into a removable dust container.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
Try replacing the belt. Rubber belts stretch out after about a year.
I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.
Vacuum doesn’t vaccum!
Sounds like there is a clog near where the hose conects to the lower brush part.. Try to look up in there.. Under the brush there should be an opening that goes into the hose.. There might be a clog there..
I have a Eureka Boss Power Plus and the beater bar is rolling, the belt is turning, but after vacuuming up around the litter box (not a lot of litter), when I turn the vacuum off, the litter, or even household dirt, falls out. When I hold the vacuum back to turn it off so that it doesn’t fall on the floor, it’s sitting in the cubby where the wheels are. The bag is empty, the hose is not plugged, the hose is securely fitted on both ends of the unit. This vacuum was purchased in July and is being
Even though the brush is spinning, you probably need to replace the belt
because it is stretched. It is probably slipping on the beater bar. This is normal and you shouldn’t be alarmed. There is nothing wrong with your vacuum. 🙂
Infinity Vaccum by Shark, model number NV31COS, will not start. The vacuum was running just fine until it grabbed the edge of a curtain. Turned it off to release the suction. Turned it back on and was working fine. About a minute later the vacuum was making an odd noise. Every 2 seconds or so it would “heave” (lack of a better word) then go away, then come back and so on. Turned the vacuum off and checked for blockage, none that could be seen or felt, and now the vacuum won’t turn. Any suggestio
Carpet brush won’t turn when vac on
I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
I have a Simplicity S24 canister vacuum. It’s about 3 yrs. old. In the past year I have had it in the shop 4 times because when using the rug piece, the piece turns on & off, on & off. The actual vacuum doesn’t… just the rug piece. I recently spent $65 on a new part, after spending countless dollars the other 3 times it was in the shop for this problem. I’m ready to buy another name vacuum altogether as I feel this vacuum is not worth the money that was spent on it. I’m very frustrated.
Repair shop has not fixed the problem? complain until they fix it properly. This is a pressure fault / jamming issue or slipping drive. Repair shop should have fixed it 1st time.
Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)