Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum\015 Want to use my Bissell Pro Heat 2X Clean Shot. Have never used it before although it was taken out of box. I am now unable to find the instructions. Thank you.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

No it can not be used aa a vacuum cleaner., it is a carpet cleaner, to be used as cleaning Did you read your instructions?
Fill up with warm water.

That`s why we recommend filling up your carpet cleaner`s tank with warm water. Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process.

Our ProHeat 2X® Revolution® Pet Pro Carpet Cleaner is another great option for area rug cleaning. It has a CleanShot® Pretreater built into its foot, so you can treat and attack spots and stains on rugs before you clean them.
Your dirty water tank may not be secured tightly. Check the rubber tab on the dirty water tank and press firmly on all edges to secure it tightly. The accessory hose door also needs to be closed securely. Check the door and make sure it is locked in place.
Pre-Vacuuming:

Before you begin using your Bissell Carpet Cleaner, it`s important to make sure that the surface of your carpets is free from dirt and debris. To do this, use a regular vacuum cleaner to remove any loose particles or hair before beginning your cleaning session.

Full Return Instructions and Refund Details: Learn more

Fits all ProHeat 2X ModelsEasily attaches to the bottom of your machine for use on hard floor surfacesSafe for use on virtually all sealed hard floor surfaces including sealed hardwood, linoleum, vinyl, ceramic tile, granite & marble.

Fill clean water tank with warm tap water. This machine uses HeatWave Technology™ which helps maintain consistent water temperature throughout the cleaning process by redirecting the heat of the motor to help maintain the temperature of the water.
The BISSELL ProHeat 2X Revolution Pet Pro Carpet Cleaner is a powerful, lightweight and easy to manoeuvre carpet cleaner that achieves professional results and the powerful suction helps carpets dry in 30 minutes.
Use Bissell 2X Concentrated cleaning formulas.

Once the tank is filled with water, add the cleaning solution. For Deep Clean mode, add 74 milliliters of formula. For Express Clean mode, add 37 milliliters of formula.

The BISSELL ProHeat 2X Revolution Pet Pro Carpet Cleaner is a powerful, lightweight and easy to manoeuvre carpet cleaner that achieves professional results and the powerful suction helps carpets dry in 30 minutes.
Use Bissell 2X Concentrated cleaning formulas.

Once the tank is filled with water, add the cleaning solution. For Deep Clean mode, add 74 milliliters of formula. For Express Clean mode, add 37 milliliters of formula.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Want to use Bissell Pro Heat 2X Clean Shot. Have
ANSWER : You can download a user manual from the Bissell website

I purchased a Pro Heat self propelled Bissell rug cleaner model 7950 from Target wherehouse on 4-26-06. I used it once and all was fine. The next time that I went to use it the smart mix for the cleaning formula would not dispense formula.I called Bissell consumer services and was told to take it to Starks Vaccumn in Sherwood, Or. That was on 10-30-06 They said that it was working so I tried it again and not a drop of formula was or has been used since.I took it back 2-13-07 and the replaced the
ANSWER : I assume that it is spraying water? Is the smart mix knob turning freely from one point to the end? If not then there is a problem with the smart mix asm. With liquid in the soap bottle, push the valve in to see if liquid comes out ok, couild be that the valve is bad. Is the seal on the valve at the bottom of the bottle, it has to be on that and not just sitting in the hole. You might try running a mix of water and vinegar thru it, maybe it is clogged up.

Hoover Jet and Wash 1500w S6254 001. Used once with great difficulty as assembly and use instructions are hard to follow.Now will not work as carpet shampooer at all, although assembly is correct as far as I can see and both motor and pump appear to be working and I am using the recommended cleaning fluid.Hoover website is no use at all in solving the problem.No cleaning fluid is being drawn up from the tank in to the cleaning fluid hose.There is suction from the suction hose so the problem appe
ANSWER : I am having the same prob my uncle got me one i cant find the manual anywhere to set it up the prob i have is where does the handle to make the water go out connect tooo ??? on the main pipe that sucks it back up i have tried every which way but not the right way obviously lol as for it not spraying mine did for all of 2 secs but think it was because i got a bit happy with the solution so gunna just try water and if its too hot it stops it spraying properly too !!

My bissell proheat 2x carpet cleaner is not spraying from the bottom or sucking up when turned on. The hand tool works just fine. I have made sure it was on floor cleaning when I used it to try and clean my carpet. the busshes are working but nothing else is happening this cleaner is about 21/2 years old and has only been used maybe 5 times so it has not had alot of use.
ANSWER : Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101.
.w56y

My Bissell Pro Heat Select 2X does not pull up the dirt from the carpet into the water. The water just slowly disappears. The first time I used it the water got really dirty. The very next time I used it it worked differently and the water just disappeared until it was all gone. I’ve only used it a couple times and I don’t see where it is working. Has anyone else had this problem?
ANSWER : Inside the plastic suction lid is a little red plastic filter that has to be cleaned out every time you use it because it sounds like your vaccum is not picking up all the hair and debri before you clean the carpet causing the water to be injected into the carpet and disappearing and not filling the tank with dirty water. Steve

This was my grandmothers machine and when she passed there was no owners manual so I am not sure how to use the settings on it or oil it properly. I so want to use it cause it was hers but don’t want to mess up the machine. She never even got a chance to use it before she passed away. I just have no owners manual. I know how to use sewing machines but this one is older and I don’t want to mess it up.
this was passed down to me. and a manual would help in so many ways. even if it was sent in a
ANSWER : May I get the manke and model # so I can help you more

Roomba keeps saying clean brushes yet are clean!
ANSWER : Make sure you take off the little cap at the end (the one that spins — just grab it and pull it straight off) and clean under it too. The rest of the brush may look perfectly clean but what happens is that hair gets stuck under spinning cap and, like a slowly growing washer, it pushes the whole brush toward the gear box. When it gets pushed over enough, the large yellow ring starts to rub against the side of the brush deck making it harder for the motor to turn the brush and you get that “remove and clean brushes” message.

Bissell Pro Heat 8910 clogged?
ANSWER : Why the motor sounds muffled I am not sure. When the water is sucked up, it goes directly into the tank. The motor only creates the suction so it can do that. There should be a filter on the rim of the recovery tank lid, is it clean? Other then pulling the top cover off, and then the motor cover so you can inspect the motor, I really don’t have a good answer for you. I t may be that that clump of hair when down the chute and into the fan, I have seen that happen with vacuum motors before.