Eureka 5892AVZ Bagless Upright Cyclonic Vacuum

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Not all vacuum cleaner dust bags are the same. With a wide range of brands and specifications on the market, this article explains how to choose the best replacement dust bag for your vacuum cleaner and why it is so important.
Locate the model number. This will often appear on the box or the back of the vacuum cleaner, hidden by cords and hoses. Once you have this information, contact a local store that carries vacuum cleaner bags and provide the associate with the make, model and model number of your vacuum cleaner.
Make sure the bag fits well and that it`s the correct size – a bag that`s too big or small or a different thickness from the branded one can affect suction. Check for excess dust in the compartment after the first use, as this is a sign of an ill-fitting bag.
Bagless vacuums, as the name suggests, don`t use a replaceable bag that collects the dust and dirt from the surface. A bagless vacuum cleaning machine is compact and uses a dust cup or chamber to store the dust and dirt. The dust cup used in the vacuum cleaner can be easily emptied and cleaned.
Can you use any bags in a vacuum sealer? No you cannot. For a bag to be able to both have the air removed from it as well as have a material appropriate too keeping air out of it once sealed you must match the type of sealer you have with the appropriate bag for it.
A: No! Unlike other similar units (which can cost up to four times as much as ours), you do not need to buy a certain type of bag for this machine. The bags you use do, however, need to be bags designed for use as a vacuum bag.
Vac with a cartridge filter or reusable dry filter: If you are picking up large to medium size debris, you do not need to use a collection bag. If you are picking up fine debris, you need to add a high efficiency filter bag or HEPA collection bag to trap the fine dust.
Leather, silk, cashmere, thick wool garments, and any natural fiber materials that could be damaged by compression should not be vacuum sealed. This may include woven items, hemp, or items with feathers. Basically, if a garment should not be compressed or squashed, it should not go into a vacuum-sealing bag.
Don`t be tempted to reuse vacuum cleaner bags. Your motives may be pure, but your air won`t be, and your vacuum cleaner may bite the dust (pun intended) years before its time.
So, you don`t need some sort of special vacuum sealing apparatus to suck the air out of most plastic vacuum seal bags. As long as your vacuum can pull air through its hose, it can be used to remove the air from a plastic vacuum sealing bag`s valve.
There are different types of vacuum bags. The most common ones are made from nylon or polyethylene. They are transparent, and they are not reusable.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

I had a real heck of a time with the bag installation, because after the pop i zipped it up and started to use it and then the bag of the vac, not the replaceable bag fell off and i kept putting it back on but it kept falling off and when i looked inside the bag to reattach it to the vac cleaner i noticed that the dust was all inside. i haven’t even used it that much as i keep it to do the upstairs bedroom only. i love that it is so lightweight and easy to use and i hope that someone can co
ANSWER : Mary, I have some wonderful news for you and your Oreck XL2600 Vacuum, I called 1 800 989 3535 customer service and inquired about your bag attach problem, it seems to be a docking station problem that “may” be warranteed, however if it is missing then it is assumed not a manufacturers defect and therefore must be purchased, however they assured me the price is reasonable and inexpensive.
.Please call the 1 800 # above with the model XL2600 upright and they will assist you in locating a repair store nearest yoou or you may go online to www.oreck.com and visit there store locator using your zip code, please dont try to glue…. I hope this works for you Mary, and please have a wonderful day!!!!

I’m using (or WAS using) a Eureka ”the boss” model 8803. The belt broke, no biggie, so I replaced it with a Eureka model U belt, the problem is when I put the new belt on and turn on the vaccuum, the belt breaks again. I am also having trouble getting the brush roller to fit right when the belt is in place. I can’t find any sharp edges that would cut the belt,nor can I find where any small bits may have broken. Anyone have a solution for me?
ANSWER : First, make sure you have the right belt, second, i am thinking that you are not lineing the roller up right, it will only fit one way. look at the ends of the roller and the grooves where it slides in, you should be able to see clearly how it goes.

I replaced the belt in our Eureka Boss Smart Vac, it still seems loose, it uses a type R belt. The beater belt still doesn’t seem to turn properly and seems that it doesn’t pick up very well when I use it on my berber carpet. We have 2 dogs and I like to use it frequently. I have changed the bags and belt……
ANSWER : Check to see that the beater brush is not frozen up. Pull the brush and clean it, spraying some WD40 on each end piece that holds the brush in place..Also be sure the belt is properly installed so that the brush turns in the correct direction..If the brush is not turning or not turning in the correct direction, it will not beat the dirt from the carpet so that it can be picked up by the vacuum’s suction.

Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.

How to place disposable bag inside vaccum /what type bags to use
ANSWER : Hello, lillie

I was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would take some of my personal time to see if Ican help. Even though this Informational site may not have your exact model orbrand, this site will help you a lot. Here is a site link about everything you want to know about vacuumcleaners and possibly yours, from repair to trouble shooting it. http://home.howstuffworks.com/vacuum-cleaner.htm

Please if this helped you at all, if you can find the time and in your heart torate my help and some kind words written would be appreciated for my free help, I would appreciate it.

Here is also my direct link to my own pages of other areas of my expertise forother problems you might have in Automotive, Appliance, and Electronics. DropIn anytime for my help.

Thanks, Mike

Vacuum Bags what type of bags do i use for this model and can i find them at walmart?
ANSWER : If you can provide the name make and model of the vacuum we could help with this issue.

What bag fits the 7618 eureka boss lite – Eureka 7618 Bagged Upright Vacuum
ANSWER : It takes the Eureka Style U Bag

I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the Hepa filter on this model (*this model uses a vacuum cleaner bag also).
ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=794479
.Generic problem for all Vacuums
.I own a self-propelled Hoover
.Posted by gohornsgo on July 17, 2008
.I own a self-propelled Hoover Wind Tunnel vacuum cleaner (Model U6425-920). I do now have an owner’s manual and was wondering how to clean the HEPA filter on this model (*this model uses a vacuum cleaner bag also).
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The best way to clean the HEPA filter is to take it outside and use a blower over the trash can and blow off the dust and dirt, or use things like an old paint brush and brush it off, or you can vacuum it off with another canister vacuum or shop vac if you have an extra one. For the best filtration is to replace it, there fore the air flow will catch most of the dust and dirt and then you would have to watch how fast it gets dirty and then do the maintenance.

.So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://www.hoover.com Telephone
Contact our Customer Service Department at 1.330.499.9499
Monday through Friday
8 a.m. – 7 p.m. EST

.Thanks, Don the Vac Man
Go Ahead. Use Us.

.