How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Model and serial numbers are printed on a label, which is usually located on the back or on the base of the unit. The serial number follows the model number.
To begin, make sure your machine is unplugged. Your machine comes with two filters. To locate the Pre-Motor filter, press the tank release button and remove the dirt tank. To access the filter, press the Filter Button found on the front of the tank and remove the foam filter from the tray.
Push the filter through the bottom of the tray to remove it. To remove light dust and debris, gently tap the filter on the side of a waste basket. With regular maintenance and genuine Bissell replacement parts, your Bissell CleanView vacuum will continue to provide superior cleaning performance.
REGISTER YOUR NEW BISSELL PRODUCT
You can find your product serial number on the label, which is usually found on the back of the unit base, the serial number follows the model number.
An optional step that we recommend if you have time is to go back over the cleaned carpet again with only hot tap water in the tank (no formula this time). This will remove any leftover formula and give your carpets an extra clean.
Fill up with warm water.
That`s why we recommend filling up your carpet cleaner`s tank with warm water. Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process.
In most homes, you`ll find your air filter housing located right next to your heating or cooling system`s air handler. This is a large metal box with a fan motor and fan inside it. Most air handlers are installed in the basement, attic, or utility closet.
Yes, you should keep cleaning the carpet until the water is clear. This will ensure that your carpets are clean and free of dirt, dust, and other allergens. However, you should be careful not to scrub too hard or use too much water. Doing so can damage the carpet and lead to more stains in the future.
Yes, it is safe to leave cleaning formula in the clean tank when not in use.
Carpet cleaner manufacturers recommend you deep clean your carpets at least 2 times a year. If you have children, pets, allergies or smoke, you should wash your carpets with a carpet cleaner at least 4 times a year with continuous spot cleaning in between.
If you`re wondering whether you can use the Bissell Crosswave without water, the answer is yes!
A: Yes it can be used as a vacuum without water.
The BISSELL ProHeat® and ProHeat 2X® series feature built-in heaters that heat hot tap water up to 25 degrees hotter for maximum cleaning effectiveness.
It is recommended to clean or replace your filters every 3-6 months depending on use. This filter is washable – Clean by hand washing in warm water.
The colored light represents an indoor air quality indication of which can be blue/good, yellow/moderate, and red/poor. The number ranges as your air quality decreases are blue: 002 – 099, yellow 100 – 274, and red 275 – 999.
Keep it simple.
In many cases, using plain water in your carpet cleaning machine is enough to flush out soil and dirt. You can even add a bit of dishwashing detergent to help freshen the carpet. (Dishwashing soap with grease-cutting capabilities can even help remove certain oil-based stains.)
Check to see if the collection water tank outside the bladder is full. The float will activate to cut off suction. Empty the collection tank and test for suction. If there is still no suction at this time, please visit a BISSELL Authorized Service Center.
You can try using 1 cup of white vinegar in your Bissell Spot Cleaner. Pour in the Vinegar, then fill the rest of the Bissell Spot Cleaner tank with hot tap water. Just be sure to follow normal safety guidelines that go with using vinegar as a cleaner.
For maximum cleaning results, BISSELL does not recommend using cleaning products other than BISSELL specified in the Big Green. BISSELL formulas are specially formulated with more “active” ingredients, contain no dyes and are designed for use in the BISSELL Big Green.
On the average, it will take approximately 2-4 hours for carpet and upholstery to dry after being carpet cleaned. To expedite the drying process, you will want to use a fan and increase your air circulation.
Laundry Detergents aren`t Formulated for Carpet Cleaning Of course not! Cleaning solutions are specifically formulated to clean and not damage the machines they`re used in and the material they`re treating. Laundry soap is designed to be used in washing machines to clean clothing.
When you use a vacuum cleaner without a HEPA filter, these particles are stirred up and put back out into the air through your vacuum`s exhaust. Regular filters can`t remove these harmful particulates and this puts the people in your home at risk.
“Most vacuum cleaners will have two filters – pre-motor and post-motor. In general, the pre-motor filter would be made of foam or fabric and can handle a larger quantity of dust before needing cleaning. The post-motor filter would more likely be folded or pleated and made from a finer filter medium.
Ways to recycle air filters:
Contact an HVAC company or supplier. Some will accept used filters for disposal. Use a mail-in recycling company that sends prepaid mailers to send off used filters for recycling. Purchase reusable filters as opposed to disposable ones.