Filter pops out and it makes a screeching noiseThe filter on my cat and dog meile vacuum cleaner keeps popping out and makes a horrendous screeching sound. If i push it down it works but is hot. If i take the beater bar attachment off it screeches again .

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Empty your dust bin

An overflowing or packed dust bin may lead to a shrill noise as the vacuum can`t fit any more debris inside. Check your dust container and make sure it is entirely empty.

Check the machine. A high pitch whistle could indicate a seal is damaged or the machine is blocked. If the noise occurs without the Wand and Cleaner head, it is likely to be caused by either the bin or cyclone.
“Acoustics and sound engineering are an important part of technology development at Dyson,” said Richards. “Whilst some companies might set out to create a signature sound, the `boing` noise you might notice when you turn off some of Dyson`s newest machines, is actually a characteristic of our technology.”
It is fairly common to hear rattling sounds in your vacuum cleaner. Often if you vacuum up a piece of hard debris like crumbs you might hear an immediate rattling sound. The sound can continue as items move around inside of the vacuum`s hoses and inside the canister. However, the sound usually subsides quite quickly.
It`s caused by a worn-out motor belt. The burning smell can also be as a result of the rubber belt burning due to the loss of elasticity. All in all, the belt is worn out and needs replacement. To fix the burning smell problem in a vacuum cleaner, you will have to replace the motor belt.
Sound cannot be heard in a vacuum, because there are no air particles to vibrate and carry it.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
If you find that your machine is turning off intermittently, the filter in your vacuum is most likely full and covering the ventilation system. Remove the filter, then empty and wash it. Allow the filter to dry for at least 24 hours, or until it is completely dry.
The Dyson V6 is designed so that you can store the unit on the charger. Storing the Dyson on the charger will not harm the battery and it is not necessary to use the unit until the battery is depleted.
Why is the vacuum is blowing dusty air out of the back? Simple: the bag or canister is full and the vacuum has nowhere to store the dust it is collecting. Empty the canister or bag. If that doesn`t fix it, the vacuum filter needs to be cleaned or changed.
Vacuum noise is quantum noise related to the zero-point fluctuations of the electric field in the vacuum state. Such fluctuations exist even though the vacuum state has a photon number of zero. Figure 1: When a beam splitter is used to attenuate a beam, vacuum noise enters via the open port.
If your vacuum cleaner whistles, this is usually a sign that your device can`t suck in sufficient air. Often, it`s the dust container or bag that`s full. Check these first and exchange them if necessary. If that`s not the case, it could be that the device is blocked.
In many cases, the smoke you see is mechanical pump oil vapour. It is easy to assume that whenever there is smoke being emitted from the pump, it means there is something wrong with the machine. Oil vapour or oil mist is a natural by-product of creating vacuum in an oil sealed mechanical pump.
A: Sound can`t be carried in the empty vacuum of space because sound waves need a medium to vibrate through such as air or water.
Sound is caused by the simple but rapid mechanical vibrations of various elastic bodies. These when moved or struck so as to vibrate, communicate the same kind of vibrations to the auditory nerve of the ear, and are then appreciated by the mind.
I would not use with filter off. This must be a feature of the newer models. This one blows air even with the filter removed. The suction is reduced by a considerable amount.
Wash filters in cold water only

(don`t use detergent or wash in a dishwasher or washing machine). Rinsing under the water supply then gently squeezing the water out of the filter. Repeat until the water runs clear.

A clogged filter in a Dyson vacuum can create a muffled sucking sound or a high-pitched squealing during use. Additionally, as the filter fills with dirt and debris over time, all the built-up debris begins to emit a burnt-smelling odor. You may need to remove and clean out the vacuum`s filter.
In the event of an airways obstruction the machine is designed to pulsate. This is an audible feature that not just indicates a restriction of airflow, but also helps in preventing damage to the motor.
Your Dyson ball cylinder vacuum has two filters; a pre motor filter and a post motor filter.
Dyson filters aren`t consumables. You wash them out and reuse them. I`m pretty sure there aren`t any reusable HEPA filters regardless of vendor. Lots of units will have a washable pre-filter, but that`s to pick up big stuff and extend the life of the disposable part.
Dyson battery life

On average, it has been seen that Dyson battery of these handheld vacuums will last for around 4 years. Generally, it is seen that lithium-ion batteries tend to wear-off after the first year of its usage, as they are limited to a few charging cycles.

Summary. Dyson batteries should last around 2-6 years before needing to be replaced. This wide range reflects the fact that how you care for and maintain the battery will affect how long it lasts. If you want your vacuum`s battery to last longer, make sure it`s stored at room temperature.
If your vacuum cleaner keeps turning off, this could be due to the following reasons: Blockages – check the hose and head for any obstructions. Filter – always check your filters, if these are clogged this could be causing the vacuum cleaner to work harder and lose suction power.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

HEPA Filter My vacuum came with a sponge over the filter and the directions said I could wash the filter. Do the directions mean to wash the black sponge or the actual filter? Is the sponge part of the filter or is it trash? Filter F27 Dirt Devil Purpose Cleaner for Pets Upright Bagless Vacuum Model #1LY2108-000
ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=618630&thid=730623
.HEPA Filter
.Posted by jenski66 on Jul 02, 2008
.My vacuum came with a sponge over the filter and the directions said I could wash the filter. Do the directions mean to wash the black sponge or the actual filter? Is the sponge part of the filter or is it trash?
Filter F27
Dirt Devil Purpose Cleaner for Pets
Upright Bagless Vacuum
Model #1LY2108-000

.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Typically the top filter of which is the sponge is washable but the HEPA filter is not, it can be brushed off and vacuum off with another vacuum, but the best filtration is to replace the HEPA filter and to wash the sponge filter, if the sponge filter get to bad then replace the sponge filter as well. Or, you can check with your local vacuum cleaner dealer in your area or to contact the manufacturer’s website and or phone #. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

.http://royalvacuums.com/ Customer Service 1-800-321-1134
.Hours are: 8:00 AM to 7:00 PM (EST)
.Thanks, Don the Vac Man
Go Ahead. Use Us.

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)

High pitch My Hoover fusion vacuum cleaner began making a high pitch sound that makes it very annoying to vacuum. I cleaned all the things I could clean. I even cut out all the hair that was entangled in the brushes. Any idea what is causing the sound. It sounds like an siren is going off.
ANSWER : The Hoover Fusion has design flaws in the motor, including a metal plate that is too thin to contain the forces acting on the motor, particularly the constant strong tension from the drive belt, and a plastic plate that is attached to the metal plate by two screws that gradually loosen over time. Assuming the filters and canister are clean, a high-pitched noise coming from the motor indicates it is about to fail as a result of these problems. You can replace the motor after it fails, but the problem will eventually occur again. For those very mechanically inclined, when the motor first starts making the high-pitched noise, you can dismantle it and tighten all screws.

Bad Motor I have purchased two of the Kenmore direct drive beltless systems with Progressive systems. The first died after a year, the vacuum motor start making a grinding noies. I pulled the side HEPA filter and could see a fine coating of graphite like dust. Took it to a vacuum repair shop. They said the brushes were going and thus the motor was shot. I liked the vacuum and bought a second, 1 year later the motor is making a slight noise that and removing the HEPA filter I find a slight metall
ANSWER : That dust is from the carbon brushes on the motor. You may need to check them, and also clean out the motor compartment. A slight noise could be a motor bearing starting to go. Does the smell like rubber or electrical. If rubber, then the belt has stretched and needs to replaced. If electrical, then something is causing the motor to run hot, like a clogged filter, or it could be a motor going bad.

Kenmoore Intellivac w direct drive suddenly started making internal sound like something was stuck. Hose is clear, and sound is made when hose is detached from main unit. Vacuum sounds find at lower pressure, only makes sound with bag door closed and/or placing my hand over the end of hose.
ANSWER : Shut off the vac and open container and remove the bag. Try dropping a coin into the hose, then raise up to see if it falls thru to the bag area. If it does check the throat of the vac where the dirt is sucked upward to dump into the bag itself.

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

My vacuum is making a loud whirring sound and is hotter than normal.
ANSWER : Hi Kelsey! I understand how frustrating this must be. Dirty filters or a clog can cause the vacuum to change sound and be hotter than normal.

Here is a quick link to troubleshooting the excessive noise:.

http://www.bissell.com/FAQDetail.aspx?id=1362&cid=ccsocial