Dyson DC17 Animal Bagless Upright Cyclonic Vacuum\015 Why wont my dc 17 dyson vac turn on?\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If your dyson vacuum isn`t turning on, don`t panic – there are a couple possible causes. It could simply be that the vacuum overheated and shut itself off. If that is the case, wait 24 hours and turn it back on. However, another problem with dysons are failed power switches.
This Dyson vacuum comes with an automatic safety system that will turn off the machine if it begins to overheat. If you find that your machine is turning off intermittently, the filter in you vacuum is most likely full and covering the ventilation system. An easy fix for this is to empty and wash the filter.
To reset the Brush bar press the Brush bar control button twice or switch the machine off and back on. Please note: In normal use, the Brush bar automatically turns off when the machine is upright and automatically turns on when the machine is in the vacuuming position.
It`s possible there`s a power consumption issue, with there just not being enough residual charge to run the machine. A new battery should fix this. My other thought is that it`s overheating. If too much power is pushed through the motor, which MAX power does, it could stop after a few seconds if it become hot.
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
Most problems arise because of a blockage – if not a dirty filter or cyclone unit, then something could be caught in the wand or the brush bar. Once again, the lack of suction could be caused by a dirty filter or a blockage somewhere in the vacuum`s system.
One of the main reasons your Dyson Airwrap won`t work is because of a damaged power cable or plug. Check your power cord for any physical damage, and look for signs of wear or tear. If you notice any fraying, tears, or exposed wires, then it is likely that the cable needs to be replaced.
3 cleaning modes Power button Press the power button to start cleaning. Lean to clean Lean handle back to start a clean. Leave upright to direct suction to the wand. The wand or tools are attached to the end of the hose.
Over time, all batteries are subject to degradation. So if your run time has declined when the machine is not in Max / Boost mode, it might be time to buy a new battery. All our machines come with a 2-year initial warranty that includes the battery.
Dyson has put as a safety feature that the machine will turn off after 8+ hours of use when heating. This is to avoid overheating the unit but also any accidents caused by leaving it running all day. Consider it a `sleep` feature.
Summary. Dyson batteries should last around 2-6 years before needing to be replaced. This wide range reflects the fact that how you care for and maintain the battery will affect how long it lasts. If you want your vacuum`s battery to last longer, make sure it`s stored at room temperature.
Loose connections will cause your vacuum cleaner to lose suction. Make sure that the dust container, the hose, the tube and the brush are all attached properly. If the problem continues, your vacuum cleaner might have a technical problem. If you suspect this to be the case, contact an authorised service agent.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
A Dyson vacuum cleaner has a lifespan of around 10 years. This is considerably longer than most other vacuums. So, if you`re looking for a high-quality vacuum cleaner that will last you for a long time, a Dyson could be a good choice. However, remember that Dyson vacuums are expensive.
One of the main reasons your Dyson Airwrap won`t work is because of a damaged power cable or plug. Check your power cord for any physical damage, and look for signs of wear or tear. If you notice any fraying, tears, or exposed wires, then it is likely that the cable needs to be replaced.
When your Dyson no longer powers on even after charging the most likely cause is a damaged battery. This means the battery will no longer hold a charge and will need to be replaced. Once a new battery is purchased you can learn how to replace it by visiting our battery replacement page here.
Plug your machine into a working plug socket and press the yellow `Test` button. Once the red `Reset` button has popped out, unplug your machine from the plug socket. While unplugged, press the red `Reset` button. Plug your machine back into a working plug socket and test the power again.
When your Dyson no longer powers on even after charging the most likely cause is a damaged battery. This means the battery will no longer hold a charge and will need to be replaced. Once a new battery is purchased you can learn how to replace it by visiting our battery replacement page here.
Plug your machine into a working plug socket and press the yellow `Test` button. Once the red `Reset` button has popped out, unplug your machine from the plug socket. While unplugged, press the red `Reset` button. Plug your machine back into a working plug socket and test the power again.
To reset the machine, turn the power off (using either the power button on the remote or the Main body), wait 60 seconds and then turn back on.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Why wont my dc 17 dyson vac turn on?
ANSWER : Hi its Darran at Dyson.

If the machine will not switch on and it has been like this for more then 2 hours, please call our Helpline on 1866MYDYSON. One of our advisors will be able to run through some very simple checks and be able to talk you through the options available to you.

Kind regards
Darran
Dyson Customer Service

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

LlllSteam vac ws working very well–shilfted to using hand vac on furniture–when I shiftead back to wanting to use the floor vacuum using the 6
brushes and the floor vac system, the r6 rotaty
brushes will not turn or function. What do IO havae to do to get them to turn and function?
The lever on the side ils set for carpet terrain.
What do I do now to get brushed to turn and scrub
as they should and did previously.
James Yerges
1’630-232-2798
JMYerges&comcast.net
ANSWER : What is the exact model number of that unit. There are several with that name. The only things that it could be are the handle mechanism that activates the brushes or the indicator is not working nad the level that selects the brushes is not working. The unit has no belts.

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The brush wont turn on my dyson DC 14 – Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
ANSWER : Sounds. as if you need to replace the brush belt.

Jim

Let me know if this helps.

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

My Dyson DC07 will not turn on. I was just using it and moved to a new area and plugged it in and it turned on for a split second and then it turned off and now it won’t turn on at all. Any suggestions?
ANSWER : Loose wire, bad switch, or thermal cut-out. In any event, you will have to use a voltmeter to troubleshoot the problem, there is no way of knowing the problem otherwise

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I turn my dyson on and it runs for 5 min then turns off
ANSWER : The symptoms you describe are typical of overheating. That indicates that there’s a blockage somewhere. Follow the instructions in your user manual for removing blockages (or you can download a copy from Dyson website if you need to), and make sure the filters are clean too. That should solve the problem.

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Filters have been clogged with wet cat litter and now the vac will turn on but shuts off and wont cont to vaccume. can we clean/rinse the filter out. filter light has come on and then turns off once the vac shuts down.. thanks
ANSWER : Using a vacuum cleaner for wet cat litter??? Not a good idea at the best of times! The machine’s cutting out because it’s overheating. You don’t tell us the make or model of your machine – some filters are washable, many are not. Your user manual should tell you. As a general rule, cloth- or sponge-type filters are probably washable, paper ones are not. If you do wash the filter, give it at least 24 hours in a warm place to dry thoroughly before re-using.

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

The brushes on the Hoover All Terrain Steamvac won’t turn. However, when I try to turn them manually they will turn. So, why won’t they turn when the machine is turned on?
ANSWER : Some vaccums have a belt on the brushes. might need a new one if it does have the belt

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Hoover u5781-900, motor shuts off (intermittent)when you shake vac or make jerky movements.If you move vac to up right position the vac starts right up.When you giggle vac, motor starts and stops no mater if you just started up or vac for ran for 45 min. Thanks Lucy C.
ANSWER : Lucy
.you have a bad connection somewhere in the unit
.this is a fire hazard and you should not use this until its been fixed
.could be a pinched wire or broken connections

Read Full Q/A … : Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Hi, my name is Mea Archer, owner of the vacuum cleaner blog, the niche website that I have developed to provide the most up-to-date news, reviews and the latest advice and information for all things vacuum cleaner related.