Eureka 3276AZ Pet Lover Bagless Upright Vacuum\015 Will not suck up debris on carpet\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Often when your machine is not picking up it is due to loss of suction. If your vacuum cleaner turns on but won`t pick up on carpet or bare floors, something is impeding suction. You may need to change the vacuum bag, unclog the hose, replace/clean the filters, replace the hose, change the belt, or repair the motor.
The most common cause of loss of suction is that the filters have become blocked. They may require cleaning or replacing. Another cause could be that the vacuum cleaner hose is blocked.
Check the Rotator Brush and Wheels

Sometimes pieces of string or other objects get wrapped around your vacuum`s rotating brush or around the wheels of the vacuum. Unplug your vacuum. Turn it over and have a look at the wheels and brush. If you see any pieces of string or objects lodged there, remove them.

The air filter traps particles as the air travels through the vacuum cleaner. If the filter is clogged, the vacuum cleaner will not have proper suction. If your vacuum filter is clogged, refer to your owner`s manual for cleaning instructions.
The level you set your vacuum depends on the height of your carpet. For bare floors, use the lowest or bare floor setting, for short and medium pile carpets use a medium setting and finally, for plush carpets use the highest setting.
1. Vacuuming only removes dirt and dust from the surface of your carpet. Even the most powerful vacuum cleaners leave things lurking beneath the surface of your carpet, including dust mites, dead skin cells, bacteria, pet dander, pollen, and allergens.
You vacuum too quickly

Vacuuming slowly will allow your machine to suck up more dirt and dust, and ultimately get your rugs and carpets much cleaner. Slow vacuuming allows the brush to agitate the carpet properly and suck up the unclean bits that emerge.

Bag: The most common method to capture the debris vacuumed up involves a paper or fabric bag that allows air to pass through, but attempts to trap most of the dust and debris. The bag may become clogged with fine dust before it is full. The bag may be disposable, or designed to be cleaned and re-used.
Pros of Upright Vacuums:

They are effective at cleaning thick carpets and rugs because they employ powered brushes. Your foot can easily manage the transition between bare flooring and carpeting. Unless you use a hose attachment, you won`t have to bend your back.

Check for a plugged hose:

Plugged vacuum hoses are sometimes the reason for a loss in suction. Hoses can get clogged with hair, dust bunnies, string, or anything else that can`t pass through the other end of the hose. Airways inside the machine should be looked at as well. Wherever there is an air passage, check it.

Clog located in the vacuum hose

Turn the unit on and feel the suction at the end of the hose handle. If there is no or low suction, then the clog is in the hose. You can remove the clog by running a long, stiff object through the hose, such as a butter knife, starting at the wall end.

Putting in the incorrect amount of oil, putting in the wrong type of oil, and oil contamination can all cause the pump to not reach full vacuum. For this reason, you must check the oil regularly to ensure that it is not only clean, but also properly filled.
Prepping Your Vacuum –

The first step before starting to vacuum should always be to check the filters and recovery bag. If the bag is anywhere near full, it should be changed before starting your job. A typical vacuum with a bag that is over 50% full can lose up to 80% of its vacuuming performance.

A vacuum cleaner is designed for dry debris and a carpet cleaner is for stains. For example, a carpet cleaner is better suited for a pet stain, but a vacuum should be used to tackle their loose fur. In instances where you need to clean a mixed medium like mud, it`s safer to use a carpet cleaner.
The most common problems found in vacuum cleaners are low suction force, excessive noise, burning smell, vacuum not turn on, and overheating. These issues can be fixed by either cleaning the device or replacing some parts of the device. At times, it is best to seek a professional to fix the cleaner effectively.
“We would recommend vacuuming at least once or twice a week—and more often if we have pets—with the right tools to remove dust quickly and effectively,” Patel advises.
Soil and Plant Debris

Soil and plant debris can clog a vacuum, and damp or wet leaves can lead to mold in the bag or canister, so it`s best to use a broom or your hands to pick those up.

Why is the vacuum is blowing dusty air out of the back? Simple: the bag or canister is full and the vacuum has nowhere to store the dust it is collecting. Empty the canister or bag. If that doesn`t fix it, the vacuum filter needs to be cleaned or changed.
Airborne dust particles(road dust, pollen, pollution, etc.) can come in through open windows. Carpeting acts like a filter, trapping the particles, which eventually accumulate and settle. Pet and human hair and dander, composed of skin flakes, gets trapped in carpet fibers.
Add a few drops of soap or detergent into a bowl of hot water. Submerge the filter and squeeze it so it absorbs the cleaning solution. If the water becomes dirty, empty the bowl and refill with more soapy water. Once the water runs clear after soaking the filter, take it out and rinse the suds away.
The moving air particles rub against any loose dust or debris as they move, and if the debris is light enough and the suction is strong enough, the friction carries the material through the inside of the vacuum cleaner. This is the same principle that causes leaves and other debris to float down a stream.
A carpet sweeper is a mechanical device for the cleaning of carpets.
It uses light sensing technology to measure the amount of dirt picked up and can thus be used to glean which parts of the house are dirtier than the others. The signals can also potentially be used to understand the size of the dirt picked up by the robotic vacuum cleaner.
In general, bagged models tend to work more efficiently than bagless vacuum cleaners because they have an extra layer of protection for their filtration system. If someone in your household lives with allergies or asthma, it`s in your best interest to choose a model that will filter out the air as best as possible.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I’ve tried all the settings on the brush and nothing works. It has done this since new
ANSWER : Sounds like there is a clog..
.
.Usually its in the hose – look closely.. Stretch the hose out straight and look in there good..
.
.Or a clog could be in the vac close to where the hose conects to the vac on either end..
.
.This is most case scenario with these types of vacs..
.
.I hope this helps !!
.Please rate me good ;o)

My filter queen just had the motor rebuilt last year and was basically a brand new unit when I got it back. It is not picking anything up now when I vacuum. The beater bar on the carpet attachment is turning fine and when I take all the attachments off the hose I can feel the suction being created like it should be picking up debris just fine. I have emptied the canister even when it did not have much in it; however, it still will not pick anything up off the carpet. It picks up debris tempo
ANSWER : It sounds as if you have a clog inside the “Power Nozzel”. They mention that there are “no user serviceable parts within the Majestic® Power Nozzle” My advice would be to see if you can see a clog with in reachable distance and try to remove the clog. One way to check for a clog which may work for you is to remove the attachment and shine a flashlight on one of of the attachment and look through the other side and see if you see light, if no light, most likely a clog. Past that you might void the warrenty if you try and open it up the Power Nozzel itself. You may want to ask a Phone service rep about clog removal.

My carpet cleaner (bissell proheat plus) is not steaming, dispensing cleaner. Seems like there’s a little thingy that should be spinning or turning….. When I work a small area of carpet, it just leaves behind dry blobs of carpet gunk like pet hair. I had to use a carpet sweeper to clean up. FYI – I filled the cleaning fluid container and after trying to clean the carpet, it did empty out but the carpet isn’t wet. Any tips? The manual doesn’t help.
ANSWER : You need to replace the pump belt. Here is the belt you need:

Bissell ProHeat Belt

Why wont my kirby carpet cleaner pick the foam and water off the carpet leaving my carpet soaking wet?
ANSWER : Is the carpet washer attached to unit is the belt hooked up? don’t use the vacum head you well get shocked.be careful

I recently ( approx. 2-3 months ago ) purchased a dirt devil. Now it is not picking up properly. When I push vacuum forward it picks dirt up a little bit, when I pull it back all the dirt falls out of the bottom. I replaced the filter today and it has not solved my problem. I dont know where my warranty is. Can you please help me?
ANSWER : Hi sounds like your line is stopped up somewhere , check ur suction an make sure your brushes are spinning, if they are try a wire clothes hanger to the hose at the bottom hose to dislodge anything that mite be stuck

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Bissell bagless sweeper sucks up dirt but will not put dirt in the canister cup. It will pickup until it clogs, then it will stop picking up dirt. It will really hold quite a bit of dirt before it stops completely up. Thanks for any help.
ANSWER : I had the same problem, called Bissell over 10 times! They send me 3 plastic inserts for the dirt chamber, not the problem. I solved it by throwing the Bissell away and buying a Eureka bagged vacuum, no more problems.

We have a Bissell Proheat Cleanshot 2X Model 9500 Steam carpet cleaner. The first time we used it things were great. The second time we used it it left tracks in the carpet. We have no idea what caused this. We tried using the machine on an entirely different carpet and it did the same thing. After vacuuming the carpet about 10 or 12 times, the tracks are still embedded in the carpet – HELP!!!! We’re read and reread the manual and contacted customer service and received no help.
ANSWER : First things first. It’s only the second time you have used the machine, so it must be fairly new. If you have a receipt and the unit is less than a year old you should take it to an authorized Bissell repair center and have the machine inspected under warranty.
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck