Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum\015 I’ve misplaced my owner’s manual for my Kenmore Progessive vacuum. Is there a button to push to switch the flow of suction when I disengage the hose to apply the attchments?\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Item Weight (lbs.) 20 – 24 lbs.
Upholstered Surfaces

Use the upholstery attachment on mattresses and fabric surfaces. Work in a horizontal or vertical motion from top to bottom. Use the crevice tool in the tight corners and seams. Use the dust brush on leather furniture to reduce any risk of scratching.

The Kenmore DS4095 Elite Cordless Stick Vacuum has a brushless motor and reaches a quiet noise level of 65 decibels. In fact, our testers found it “incredibly easy to carry on a conversation while the vacuum sucked up everything in its path.”
noun. : a weight equivalent to the one obtained by weighing a body in a vacuum but actually computed from ordinary weighing by vacuum correction using the known volume of body and weights and the known density of the air.
Almost all upright and canister vacuums come with a variety of attachments—extra brushes, hoses, and other tools—to make it easier to clean more than just the floor. “These tools are meant to help clean different surfaces and difficult-to-reach spaces,” explains Frank Rizzi, who conducts Consumer Reports` vacuum tests.
A: To determine what accessories fit your vac, you need to determine the diameter of your hose. To do this, measure the opening of the accessory end of the hose. Shop-Vac® brand hoses will measure roughly: 1.25″, 1.5″ or 2.5″.
32mm is the most common size used for vacuum cleaners, ducted vacuum cleaners and backpack vacuum cleaners. However some less common sizes are 35mm, 36mm or 38mm. The best way to find out what size will fit your vacuum cleaner is to measure the INTERNAL diameter of one of your old vacuum cleaner tools.
Upholstery Tool: The upholstery tool has a small, flat head and powerful suction, this attachment works well on fabric surfaces such as mattresses, couches, chairs and other fabric based pieces.
One caveat: Handling this vacuum`s 23 pounds takes some muscle. In our member survey, Kenmore canisters earned a very good score for predicted reliability and an average rating for owner satisfaction.
They can damage the ears and cause loss of hearing. Q: How much louder than a 20-decibel whisper is the 60-decibel sound of a vacuum cleaner? A: This is a 40-decibel increase. With every 10-decibel increase, the intensity of the sound is 10 times greater.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

After using my attachments I have a hard time getting suction when using upright again – how do I get the suction on my upright? It’s a Hoover blue widepath Tempo~ thank you
ANSWER : It may be clogged underneath the vacuum where the roller is. Take the bottom plate off and look into the intake port. There may be some blocking the port.

No suction My vacuum does not seem to have much suction when in use. The agitator brush is rotating but I’m not able to get much off the carpet. The suction is fine when I use the attached wand.
ANSWER : If the belt is stretched, then it can’t turn the brush rol under load, if you haven’t chenged it in the last 6 months, then I would put a new one one. Also check the dirt inlet by the brush roll for a blockage.

No suction Just received my refurb. dyson animal bagless. Finally figured out how to get it all together, turned it on and there is no suction coming up thru the beater bar. The hair is just collecting around the bar and not going up into the canister. It appears all the suction is going thru the open red end of the attachment hose, which has a vented cover piece. Am I missing a piece or is there a switch to turn of the attachment suction?
ANSWER : So the red hose isn’t connected to a part on the vaccum so like it is connected to the connester but not to an opening just above the beater bar, this is the only idea i can supply you with. good luck, maybe i got lucky and helped you out.

How do I attach and use the shampooing attachment so I can clean my couch?
ANSWER : Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=579274
.How do I attach and use the shampooing attachment…
.Posted by rottylvr on May 08, 2008
.I have a Kirby Vacuum and Carpet Cleaner that I know how to use, all except the attachment that I am not sure about. I am not sure if it is a vacuuming attachment or can I attach it and use it to clean my couch, I do not have the user guide for my vacuum as I got it from my son’s ex girlfriend in lieu of money she owed me. It looks like it should be used for shampooing things like stairs and furniture, but for the life of me I cannot figure it out! Can you please help me? Tell me how to attach it if it is supposed to be used to clean stairs and furniture or tell me where I can find the user guide to look at and see how to use it……Oh by the way I have a 160 pound rottweiler that tries to live on my furniture and my couch is in desperate need of cleaning, this is my only day off and I have spent all day cleaning carpets due to my dog and would love to clean my couch before returning to work and putting my dog in the back yard now that it is warm enough for him to be outside all day.
Thanks,
Desperate to reclaim her couch


.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. My suggestion is that you contact the Kirby Co in Cleveland listed below and they will instruct you either to down load a owner’s manual or they will mail one out to you, there might be a local Kirby dealer in your area that might have a manual as well. Also, there is a separate shampoo head that will be in the owner’s manual, you remove the vacuum head and bag assm and attach the shampoo head, make sure you use genuine Kirby shampoo for the carpet. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

.http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
.Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
.Mail To:
.Consumer Relations
.The Kirby Company
.1920 West 114 Street
.Cleveland, OH 44102
.Thanks, Don the Vac Man
Go Ahead. Use Us.

I don’t have any suction when i use the vacuum, if i use the tools adaptor i still have suction. how do i get the suction back to the vacuum?
ANSWER : Plugged lower,, hair,, carpet etc.

My dyson slim dc18 has suction in hose attachment but no suction in floor attachment. Tried to clear any obstruction by running clothes hanger in rectangular opening that empties into cannister and also tried to blow air through there also but still can not get suction
ANSWER : Hi its Darran at Dyson.

It would be worth checking that the brush bar is turning when the machine is in the vacuuming position. If it is not turning, please press the re-set switch located on the cleanerhead.

If this starts the brush bar turning but does not solve the problem, please check the cleanerhead for blockages and remobve any threads or hair trapped around the brush bar.

Shoudl you need any further help or advice, please contact our Helpline on 1866MYDYSON.

Kind regards
Darran
Dyson Customer Service

Suction only works using the hand held mode, there is no suction when try to use on carpet mode,
ANSWER : There must be a clog in either the hose, dirt inland by the brush roll, or bad filters. If you have suction at the end of the hose, then look lower all the way to the brush roll.

Hoover Jet and Wash 1500w S6254 001. Used once with great difficulty as assembly and use instructions are hard to follow.Now will not work as carpet shampooer at all, although assembly is correct as far as I can see and both motor and pump appear to be working and I am using the recommended cleaning fluid.Hoover website is no use at all in solving the problem.No cleaning fluid is being drawn up from the tank in to the cleaning fluid hose.There is suction from the suction hose so the problem appe
ANSWER : I am having the same prob my uncle got me one i cant find the manual anywhere to set it up the prob i have is where does the handle to make the water go out connect tooo ??? on the main pipe that sucks it back up i have tried every which way but not the right way obviously lol as for it not spraying mine did for all of 2 secs but think it was because i got a bit happy with the solution so gunna just try water and if its too hot it stops it spraying properly too !!