Vacuums
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
The first thing to know is that sewing machines needles are standardised. They are compatible across the range of brands, including Janome, Brother, Husqvarna, Elna, Pfaff etc.
With needles, there are two important measurements to consider. Gauge: The diameter, or thickness, of the needle. The higher the number, the finer or thinner the needle. For example, a 30-gauge needle is smaller than a 27-gauge needle.
21g needles are the most common gauge of needles used for routine blood draws and venipuncture. The gauge is small enough in which it does not cause any significant pain or discomfort during use.
Needle gauges are sized numerically, with the smaller numbers correlating to larger needles and larger numbers correlating to smaller needles. In general, the smallest appropriately sized needle is used. The most common sizes are 18, 20, and 22 gauge.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Sorry about the catagory…but you do not have sewing machine on list.
.
.I have this machine. I use it for my heavy sewing, as it will go through anything. I would be happy to copy the manual and send it to you for copy costs. Just let me know. I would love to know what knowledge you have gained about this machine. It does not appear to be an easy machine to find info on, may not have produced a lot? I had no idea it was not a European produced machine.
.
.Lisa
xl-2620 what type of needles do i need
1st: Sewed one inch OK; moved fabric and it stopped sewing, motor made thudding noise. When push-button (NOT pedal) is used, gives error E6,
consistent with motor noise.
2d: In order to check threading had to manually PULL bobbin case toward me or it was UNDER needle plate. Cleaned a fair amount of dust out. Reinstalled bobbin, etc., per manual, rethreaded.
3rd: Will sew 2-3 stitches, then packs up again just like in 1st instance above. Have st
regards
We have brought the Bernina in, set it up, oiled it as specified in the manual, with the original sewing machine oil. We have correctly threaded the machine and the bobbin thread is up.
When we press on the pedal to sew, the machine gets electricity and buzzes
From what you describe there can be only 2 causes…Either the machine is still stuck ..and the motor buzzes cause it can not spin it ..and in this case it needs to be oiled more..and be spun by hand until it moves well and free…and after that it will work ..or during the storage ..from condense or so ..the motor is stuck ..and needs to be checked…In this second case ..it probably need to be oiled too (the motor ) ..and the coils changed..
Have a nice day ..!
Thanks
Tim
http://www.allfreecrafts.com/sewing/needle.shtml
Check the above links it will help you to gain knowledge
The machine Model is ABM 3600. I hope this is the only information that you need. Thank you very much.
Please check this page:
http://www.manualsonline.com/ex/thread/view/idThread/166697
The link is marked “Welbilt_ABM3600_Manual.pdf”
Could you please check it and inform us if this is the right one? If it is not, we will look somewhere else for the manual you need, OK?