Kirby Heritage II Vacuum\015 My vacuum keeps breaking the belt. I am wondering if I have the wrong size. Can you help me?\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
The Heritage II introduced our revolutionary Zippbrush.
The Heritage model introduced a bright red look and introduced the Turbo Power with the turbo brush, turbo groom and turbo sander. This model had new packaging, pistol grip handle and a bag top cover with wire form support. What Brush Roll Does The Kirby Heritage Use?
The Tradition model was the very first model to include a disposable filter bag. It also featured the portable carrying strap, massage cup, curved extensions tube, duster buffer.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
1 – one or both bearings are worn so armature (rotating part) wobbles as it is spinning and cause motor brushes to wear fast. Solution – change bearings too.
2 – Whoever replaced brushes – did not use some brush seating sticks to make cmutator smother and contour brushes to the shape of the comutator (not likely). Solution – appropriately install new set of brushes.
3 – Comutator is so warped that seating sticks do not help anymore – solution – new armature or turn the old armature.
4 – The fact that ONLY ONE brush was worn may mean that there is something wrong with the brush or housing. Maybe it could not move freely within the housing? I think this may be most likely cause it it may be a combination of all 4.Is it worth to fix? Hmm depends how much will it be. If this is 100+ – I’d say get newer Kirby for 300 ad enjoy the tech drive (Heritage does not have tech drive so it is much harder to vacuum with than the newer models)
.I see no one’s given you a solution yet.
.Well, I’ve searching online for Shampooer instructions and I found some at http://www.greatvacs.com/shampoo.shtml
.As for the manual, I looked at kirby.com and found a #:
.1-800-437-7170.
.Hope those help.
.Love in Christ, Passionatehearts
.
US—————-(1)-800-437-7170
.Europe————(1)-800-547-9272
.Africa————(1)-800-203-222
.Kirby Heritage 84
.Posted by sixbrocks on Jun 23, 2008
.I can’t figure out how to get the belt engaged on my Kirby Heritage 84. There are very simple instructions on the front assembly; however, the belt doesn’t engage with the rotor, and the beater bar does not spin. When I have the front twisting section on the “Belt On” setting, it seems as though it actually disengages the belt. I see no faults in any of the mechanical parts, but just can’t get the belt to go on the rotor.
(I purchased this machine @ a garage sale on Saturday. It’s in perfect condition.)
My vacuum cleaner is a Kirby 84 Legend.
Help! Jennifer
.
.Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always check your owner’s manual but the Kirby has a dial on the front of the machine and you needs to dial the belt off of the fan pulley counter clock wise and to check to see if the Kirby bell housing will release @ the top so that you can remove the bell housing. If not then remove the bottom plate and take out the brushroll on one side and then slide the belt off of the brushroll. Then you can slide the new belt onto the brushroll to the center and then re-insert the Kirby brushroll with the screw heads facing downward then you can replace the bottom plate – then use the Kirby spoon or hook to dial the belt onto the fan pulley clock wise. Once that is done then plug in the Kirby and try to vacuum to see if the Kirby is picking up properly, if not repeat the process. If you have a question, feel free to contact your local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
.http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
.Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
.Mail To:
.Consumer Relations
.The Kirby Company
.1920 West 114 Street
.Cleveland, OH 44102
.Thanks, Don the Vac Man
Go Ahead. Use Us.