Dirt Devil Hoover Uh70085 Pet Cyclonic? Upright Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Consumers give high marks to some Dirt Devil models like the Breeze canister and the Featherlite bagged vacuum – where both get on average 4 out 5 stars based on over 200 ratings. That means that Dirt Devil has designed the perfect vacuum for the majority of home users.
Should you find that the mains cord has tangled inside the machine and will not feed out, you could try a firm pull on the cable – this should untangle it. Pull it out until you see the yellow warning marker on the flex appear at the cord entry.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
On your DC23’s cord is a red indicator to show the maximum length the cord should be extended – pulling it further than this could cause damage to the machine. If this appears to have happened to your machine, please get in touch with us so we can provide further assistance – you can call us on 0800 298 0298 (UK), or 1-866-693-9766 (US).
We’ll look forward to helping you resolve this issue.
Best wishes,
Jack
Dyson Online Customer Support
http://www.dyson.com/
If the your machine’s hose has been over-extended and damaged, I’d encourage you to get in touch with us directly so we can provide further assistance. You can reach our customer Helpline on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA), or 1800 239 766 (AU).
Please have your machine to hand when you call so we can run though some quick checks to determine the best way of resolving the issue.
We’ll look forward to hearing from you.
Best wishes,
Jack
Dyson Online Customer Support
http://www.dyson.com
but to get to them you need to remove the button (the one that unlocks the flap to empty the dust out) There is a small rectangular hole on the other side of the button, pushing a small screwdriver (3-4 mm jewellers ) will release the button this will reveal one of the three remaining screws , removal of the plastic section retained by this screw will reveal the remaining two
Possible the motor can be faulty, or test the belt if is crack and replace. However you must see if there are some debris inside. Please see the section troubleshooting in your user manual. Download Biseel.com or www.fitness.manualsonline.com or www. retrevo.com or www.manualsfactory.com
God bless you
Before opening the vac, gently push the cord back inside the housing.
2 possibilities:
If the spool rotates and allows the cord to push in , the body must be disassembled, and the cord winder removed and the spring reloaded. This is tricky work. you will need to wind the entire cord onto the spool, then load 3.5 rotations onto the coil spring for tensioning, then reassemble. It’s a bit like working on a land mine of you’re new at it. Wear safety glasses.
BUT if the spool is locked from the outside and the cord wont push in or pull out, a fine , long blade screwdriver can be inserted diagonal to the body through the cord slot and with luck you can lift a cog of the spool releasing tension and the rewind will work. try that first , but be gentle . You must release the cord spool allowing a a dog ear catch cog to release inside by gently lifting upwards.
Post back to say how you made out,
Or look for an AERUS Electrolux service shop.
.
.hope this helps