Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Description. The SteamVac® with CleanSurge® Carpet Cleaner has powerful, rotating brushes that groom carpet fibers from all sides to lift away dirt and grime. Now, you can clean carpets and upholstery without the hassle of renting a machine.
HOOVER® SteamVac™ cleans carpet fibers by applying, scrubbing and removing hot tap water and cleaning solution.
Fill the water tank with hot tap water.
All Hoover carpet cleaners have a clean water tank and dirty water tank. Remove the clean water tank at the top by pressing on the lock on the handle. Unscrew the cap to the water compartment and fill the tank up to the fill line with water.
Although vacuum cleaner and the short form vacuum are neutral names, in some countries (UK, Ireland) hoover is used instead as a genericized trademark, and as a verb. The name comes from the Hoover Company, one of the first and more influential companies in the development of the device.
A steam cleaner uses hot water vapor and a cleaning solution to displace and extract dirt, dust, and tough stains on your carpet. A vacuum uses an electric motor to suck dirt, dust, and hair from your carpet and hard-surface floors.
Steamers are best for a hygienic clean, removing invisible dirt and allergens. They can loosen fresher stains on a carpet, too. They are often smaller and easier to use. This makes them great for a quick refresh or targeting smaller zones such as high-traffic areas if you don`t need to do a full deep clean.
Steam cleaning is a really effective and efficient way to lift build up from the carpet fibers, including mold and pet scents. It also is effective at improving the appearance of carpets that have been neglected over time.
After you get out your carpet cleaner, fill the clean tank to the line with hot (not boiling) tap water. Hot water does a better job cleaning than cold but, if you boil it, you run the risk of melting parts of your carpet cleaner.
“Most experts agree, hot-water extraction does the most complete job of removing all soils.” If carpets are more effectively cleaned using hot water, helping to protect IAQ, then one of the goals of green cleaning—protecting human health—has been accomplished.
The short answer is that you should not use vinegar for carpet cleaning. There is truth to the idea you can use vinegar as a natural disinfectant for cleaning but it cannot remove dirt or soil from a surface or from carpet.
You can use most carpet shampoos in any type of carpet cleaning machine. However, some solutions may have specific requirements, such as an upright or water-based machine.
Laundry Detergents aren`t Formulated for Carpet Cleaning
Cleaning solutions are specifically formulated to clean and not damage the machines they`re used in and the material they`re treating. Laundry soap is designed to be used in washing machines to clean clothing.
So a 1000W vacuum cleaner will use 1 kilowatt (1000 Watts) of electricity in 1 hour. The point here is that it is a consumption measurement, rather than a power output measurement… it tells you nothing about suction. If you want to use more electricity, then use a vacuum cleaner with higher wattage.
The BISSELL performs better on all surface types, and it has an alternative configuration for cleaning harder-to-reach places. However, the Hoover has better storing capabilities, a longer range, and virtually no recurring costs. It`s also significantly easier to maintain.
Cons of Steam Cleaners
There are a few disadvantages to using steam cleaners. One is that they can be expensive. Another downside is that they require a lot of water, which means you will need to empty and refill the tank often. Finally, steam cleaners can take longer to clean than other methods.
In a nutshell, indeed, vacuum first! Before using a steam carpet washer or cleaner, the carpet should be vacuumed thoroughly with a standard household vacuum cleaner. This would get rid of any small soil particles as well as any gravel or sand that has made its way through the building.
The best method of cleaning carpets is usually steam cleaning, which removes over 90% of dirt and bacteria from carpeting. Dry cleaning carpeting is also effective for ensuring carpets are ready for foot traffic as quickly as possible.
Because steam cleaning uses high temperatures, it actually destroys bacteria, viruses, and allergens, which makes it a much more effective cleaning method than others that provide only superficial aesthetic benefits.
There are two types of way to clean your carpets either dry cleaning or wet cleaning. Dry carpet cleaning uses no-moisture or “very low moisture” (VLM) method. Wet carpet cleaning uses water, known as the hot water extraction method. Wet cleaning is more commonly referred to as carpet steam cleaning.
Your carpet will be only slightly damp to the touch after your cleaning. Most carpets typically need 6-10 hours to dry completely. However, it could take up to 24 hours to dry depending on the time of year your carpets are cleaned, and the air circulation, humidity and temperature in your home.
A general rule of thumb
A good rule of thumb is to have your carpet professionally steam cleaned at least once a year, twice if you seem to track a lot of dirt in. This way you get a good, deep cleaning and don`t let the dirt build up.
Detergent left in a carpet, serves as a magnet for new dirt. When finished shampooing, run a tank of clear water over the heavy cleaned areas (e.g. entrances and walkways). This will help remove excess shampoo and keep those areas cleaner for longer. It also helps to rinse out the shampoo from inside in the machine!
The ideal temperature range for carpet cleaning is between 100°F to 150°F. At this temperature, there would be enough heat to accelerate the chemical reaction during cleaning, but it will not be hot enough to create problems with the carpet or the carpet cleaner.
It`s really straightforward – all you need to do is sprinkle a generous among of baking soda over your wet carpet and let it sit. The baking soda not only absorbs moisture, but it`ll also absorb any nasty odours.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
My carpet cleaner (bissell proheat plus) is not steaming, dispensing cleaner. Seems like there’s a little thingy that should be spinning or turning….. When I work a small area of carpet, it just leaves behind dry blobs of carpet gunk like pet hair. I had to use a carpet sweeper to clean up. FYI – I filled the cleaning fluid container and after trying to clean the carpet, it did empty out but the carpet isn’t wet. Any tips? The manual doesn’t help.
ANSWER : You need to replace the pump belt. Here is the belt you need:
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
We have a Bissell Proheat Cleanshot 2X Model 9500 Steam carpet cleaner. The first time we used it things were great. The second time we used it it left tracks in the carpet. We have no idea what caused this. We tried using the machine on an entirely different carpet and it did the same thing. After vacuuming the carpet about 10 or 12 times, the tracks are still embedded in the carpet – HELP!!!! We’re read and reread the manual and contacted customer service and received no help.
ANSWER : First things first. It’s only the second time you have used the machine, so it must be fairly new. If you have a receipt and the unit is less than a year old you should take it to an authorized Bissell repair center and have the machine inspected under warranty.
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
.
.Otherwise, The jets on this unit clog easily, there are two of them and you can locate them under the recovery tank towards the front of the machine, and blow them out with an air compressor. To prevent the jets from clogging in the future make sure to flush all shampoo out of the machine with clean water when done using it. That is most likely your problem.
.
.If it is leaving black streaks on your carpet it could be coming from a burnt belt or melted brushroller part, in which case inspect the belts and brushrollers and replace the damaged pieces.
.
.I hope this helped
.
.Good Luck
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
I have a Bissell Pro 2x carpet cleaner. The water heats properly as well as spraying the cleaning product. However, when I go to suction the water from the carpets, the 2 in 1 water tank bladder works properly but there is no dirty water outside the bladder. I have only used this carpet cleaner ~ 5 times and in the beginning I had to empty the suctioned water quite frequently as it was dirty and it could not not hold any more water. So I have done 1 room and all the dirt remains in the carpet
ANSWER : Check that the suction cone is not blocked. Check that the filter or hose to the bladder isn’t blocked as well.
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
BRUSHES WONT TURN ON HOOVER STEAM CLEANER – Hoover F5891-900 Steam Cleaner
ANSWER : Belt probably broken. unplug from power and remove the plate from the bottom of cleaner.belt should be visible on one side or other.
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
No steam My SV1000 steam cleaner will not make steam. It heats up, but I think the small portholes where the steam comes out are clogged up. Are parts available to change the steam line?
ANSWER : I used the straw to prime the lines and 50/50 mix of vinager and water and it worked perfectly. I then mixed the water container with the same mix and ran it through the system. All works fine now.
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Carpet stained recently cleaned my cream coloured carpet in my entrance hall with a carpet cleaning product, wet foamy spray type, ran out of this and found a part bottle of a different brand in my cupboard, used this to finish off however must be some sort of reaction and carpet gone a greenish colour i think (colour blind sorry ) any idea’s of any product that might restore my carpet, will try anything, nothing to loose. thank you Peter McGurk Goole East Yorks
ANSWER : Ok in the future try to have carpet cleaned only by a pro. For spot cleaning use white paper towels or dish towels and warm water. (ONLY WHITE) 99% of fabric is white and then dyed to color and if you use a color cloth you might pull the dye from the cloth into the carpet. Now what you can try is your basic dishwashing detergent like electrosal with warm water and a dishtowel. little at a time try to blot not rub. try AFTA if that doesnt work. wet the rag first with warm water. pour the afta on the wet rag not on the carpet.
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
I have a Hoover SteamVac SpinScrub with Clean Surge Carpet Cleaner. I loaned the cleaner to my son, who lives 3 hours away from me. My son returned the Steam Cleaner to me on Easter Sunday. My son failed to return the Owner’s Manual. I need to clean my ottoman. I have never used the upholstery & stair cleaning tool. Would you be able to e-mail me the instructions for this chore? My e-mail address is: [email protected]. My name is Kay. Thank you!
ANSWER : Hi,
I would be glad to send that. But, you never Mention the Model Number and there are Various Models introduced by Hoover.
Let me know the Manual and within Few Minutes, i would be able to send you one more email which would have the Manual Details.
Let me know, if needed further assistance.
Hope i helped you.
Thanks for using ‘ Fixya ‘ and have a nice day!!
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
I have a Hoover steam vacuum carpet cleaner Model
ANSWER : The lever on the handle should be pressed when you want to apply solution to the carpet
Read Full Q/A … : Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
