Kirby Ultimate G Bagged Upright Vacuum\015 I thought your guide was great and I would like to get my replacement parts from you, but I didn’t see it on the e-bay web site store. I think I need a new pivot assembly switch which is what the handle plugs into. the handle just kind of flops around and frequently tips the whole vacuum cleaner over. I think the switch needs replacing. I can get the part but how difficult is it to crack the case and fix this? I noticed that it looks like I’ll need hex wrenches to crack the case. I just don’t want to get into the middle of something if it’s something I can’t or won’t be able to handle. thank you.’.nancy s.\015
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Filters can become clogged with dust over time. It is important that you regularly clean your filters to increase the airflow. Over time filters may require replacing, it is recommended that HEPA filters are changed once a year minimum to maintain a healthy vacuum.
The Kirby is built in America by employees dedicated to their craft.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps…
.Marci
.POSSIBLE CAUSES:
.
.
.Please note……The Kirby has TWO safety switches that need to be engaged before it will operate. One is on the fan case in the front. It is activated by having an attachment attached to the front. (hose, power nozzle, etc.) .The other switch is on the side of the Kirby where the cloth bag attaches and is engaged by the little tab that sticks out from the side of the hard plastic cloth bag “boot”. The bag boot MUST be completely engaged to activate the safety switch and allow the Kirby to power on. If you are having trouble getting the bag to properly engage, (sometimes they are STUBBORN) simply lubricate the black gasket that the boot fits onto with gasket lubricator, VASELINE, or try a tiny drop of DISHWASHING DETERGENT or HAND CREAM. It doesn’t take much, so use the smallest amount possible to get the desired effect. You should hear a slight “pop” when the bag completely engages.
.If neither of these things are indicated, it is probably again, either the power cord, switch or the carbon brushes.
.
.If your Kirby is sparking there are a few causes…
.
.PROBABLE CAUSE (MOTOR): Worn out carbon brushes, bad armature or perhaps BOTH
.PROBABLE CAUSE (CORD): The cord has a short in it. Replace the power cord
.PROBABLE CAUSE (POWER NOZZLE): There is something metallic stuck in the fan or power nozzle
.
.I think you have a problem with the carbon brushes and amature because of where you describe seeing the sparks. I would suggest taking it to an authorized dealer for repair if it is the motor that is going bad.
.
.http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTIONS_W0QQugidZ10000000004594992
.
.Marci