Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum\015 The mop use to steam,but in half way the light turn off & it wont turn on anymore,try to others outlet still the same resault,wont turn on,wont steam.Whats wrong w/ it ?Thanks.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

Check if the mop is properly plugged into the outlet and turned on. If it is on and still not functioning, try resetting the mop by plugging it into a different outlet. Add water to the tank if it is empty then try selecting the `STEAM` setting once more.
Not Plugged In

You will notice a blinking blue light on the front of the device when plugged in correctly. If the light fails to come on then try to plug into a different outlet.

First, check to make sure the unit is plugged in and is in a working outlet. Next, check to make sure there is water in the tank. It is very important to make sure you are ONLY using water to fill the tank. Other solutions may cause breakdown of the gasket and/or other parts of the machine.
The Cleaning Nozzle is clogged

Calcium and other minerals may build up in the nozzle, so you may need to clean the nozzle in order to produce steam. To do this, either use the nozzle cleaner provided with the Steam Pocket Mop, or use a straightened-out paper clip.

Manually turn your shark robot upside, find and press the power button for about 10 seconds, give it some 10 – 15 seconds, then turn it back on. Your shark robot will reboot and reset in the process. You can also use the Shark Clean app to factory reset your shark robot.
If your Shark`s LED headlights are flashing, nine times out of 10 it means that your brush roll is clogged up. Follow the above steps (under the “solid red light” section) to get that brush roll spinning the way it should once more.
The lights will flash when the unit is charging, with 1 light representing it has a low charge, while 3 lights represents the unit is fully charged. When the unit is in use, the number of illuminated lights will go down as the battery becomes depleted.
check the cap of the water tank to make sure it is correctly and securely attached to the water tank. check your water tank to make sure it is securely and correctly fitted in to the body of the garment steamer – incorrect placement of the water tank can block water from feeding in to the body and boiler of the steamer.
We have had some customers who have had their steam cleaners for 5-8 years and are still going strong. For less expensive models like the steam mops or handhelds, you should probably expect more like 3-6 years of consistent use.
Sometimes the battery may have gotten dirty or slipped away from its contacts inside the Shark robot vacuum. Cleaning and repositioning it may fix your problem. But if it`s an old battery or there are clear signs of damage, you should order a replacement battery that matches your model.
The spray tip may be clogged. Use a paperclip and insert it into the spray tip to remove a clog. Now plug back in, making sure you are using a working outlet. You will know, as the Ready light will begin to blink when plugged in.
The vacuum has a safety feature that turns off the vacuum when the vacuum gets to a certain high temperature or overheats. This happens because the vacuum has a motor protective thermostat. If the vacuum turns off due to overheating, the thermostat has to be reset before you can use it again.
First, make sure your vacuum is plugged in. If it is plugged in and the power button is on, you may need to reset your circuit breaker. If that option doesn`t work, try resetting the motor thermostat. The steps to reset the motor thermostat can be found on the troubleshooting page.
To reset your shark vacuum, put the Power button in the On-Off position and keep the vacuum unplugged. If necessary, clear the hose. Once it has cooled completely, plug the vacuum back in again.
If you checked your brush roll, floor setting, and belt but your brush roll is still not spinning, that means you probably need a Shark micro switch replacement. This small switch tells the vacuums brush when to start spinning.
The BMS doesn`t only consist of the actual battery but also the circuitry and other components; together, they ensure the right range of voltage and current reaches the battery for a duration of time. So, in that respect, you can`t overcharge your handphone or vacuum cleaner.
A thermal cut off is a heat-sensitive device that automatically disconnects the power to a vacuum`s motor when the operating temperature exceeds a safe value.
The LED Shark Light is a perfect combination of art and technology. The flat 2D etched graphic is magically transformed into an illuminated 3D image with the use of 7 energy efficient LED lights integrated in the base. use the touch button to change the mode or select from 7 different colors.
If the Clean RED or Max light is flashing, it means that the robot may be stuck on an obstacle or the front bumper may be jammed. To fix this error, relocate the robot to a different location and inspect the bumper. If light continues to flash, try to remove the front caster wheel and clean the wheel housing.
Our testing has found that all steam mops remove stains fairly well, with marginal differences, and are likely slightly better than a regular mop and bucket due to the heat and vapour produced by the steam.
Aim for a replacement every two to three months or sooner if it looks very dirty. Your floors are only as clean as your mop head; a soiled and worn mop will not be effective.
Do Steam Cleaners Use Soap or Chemicals? These appliances use only clean, cold, tap water. No chemical or detergents can, or should, be used in these systems.
If you have “hard” water, mineral deposits will most likely accumulate (eventually) in the machine and cause it to stop steaming. (Hard tap water is probably the #1 reason for premature failure in appliances that use water like steam irons, coffee makers, steam mops etc.).

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Shark Euro pro mop the ligt wont turn on anymore.
ANSWER : My husband fixed my shark steamer by taking it apart and testing it wire by wire .the problem ?a fuse hidden inside the unit..unscrew the screws and get inside the steamer .at the bottom of the steamer there is a gold orange foil looking piece .under that is a small fuse .unless you can find another fuse just cut that one off and rewire the wires together .shark now comes on

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

For some reason, our shark steam mop stop working. Usually after I plug the steam mop, the power light would light up then you would hear & see steam coming out of the mop’s head but all of
ANSWER : HEATING ELEMENTS BURNT OUT. WILL COST OVER $100. TOFIX. SHARK NOW HAS A NEW MODEL “SHARK 3” MUCH BETTER

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

No manual on my shark steam mop – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}..Hi,
.
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.Here also is a link to get any of the Shark Manuals that you need.
.
.heatman101
.
.
.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Can you use vinegar in the shark steam mop – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}....
..Hi,
Yes, a bit off vinegar should not be a problem, but it may cause other problems…

..
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.
.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Shark S3501 steam mop will not make steam – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : I posted this video showing how to clean the heater core of the S3501.

http://youtu.be/S4NglGXVv50

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Mop wont power up – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Hi,

Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head…

Euro-Pro Shark Steam Mop Problem

Here also is a link to get any of the Shark Manuals that you need.

heatman101

c

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Shark steam mop no steam coming out of it – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}....
..Hi,
..
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.
.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

The shark steam mop stopped steaming – Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum
ANSWER : Normal. 0. . . . . . . MicrosoftInternetExplorer4. ...... /* Style Definitions */. table.MsoNormalTable.\011{mso-style-name:”Table Normal”;.\011mso-tstyle-rowband-size:0;.\011mso-tstyle-colband-size:0;.\011mso-style-noshow:yes;.\011mso-style-parent:””;.\011mso-padding-alt:0in 5.4pt 0in 5.4pt;.\011mso-para-margin:0in;.\011mso-para-margin-bottom:.0001pt;.\011mso-pagination:widow-orphan;.\011font-size:10.0pt;.\011font-family:”Times New Roman”;}.. ..Hi,
..
.Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it may.not be getting steam to the head…
.
.Euro-Pro Shark Steam Mop Problem
.
.heatman101
.
.
.

Read Full Q/A … : Euro-Pro Shark Steam Mop – Gray/ Purple Vacuum

Hi, my name is Mea Archer, owner of the vacuum cleaner blog, the niche website that I have developed to provide the most up-to-date news, reviews and the latest advice and information for all things vacuum cleaner related.