Kirby G4 Bagged Upright Vacuum
How to Identify and Fix Common Vacuum Problems ?
Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :
Check that the vacuum cleaner is plugged into a working power outlet and that fuses and breakers don`t need resetting. An activated thermal cut-out due to a blockage is the next most likely cause of the problem. Check for blockages in the hose and filters, and remove any obstructions that you find.
– Some vacuums have an in-line thermal fuse (often located between the switch lead and the motor coil). If the fuse is blown it will need to be replaced. – Check your home circuit breaker – it may have tripped. – Some vacuums have a brushroll on/off control.
Kirby vacuum cleaners are made of die cast aluminum where most other vacuums are made of plastic. This makes the Kirby vacuum more durable than other model on the market. This is why the average lifespan of a Kirby is over 30 years.
The Dyson vs. Kirby vacuum cleaners debate can be complicated, as these brands are so different. If it comes down to price or size, Dyson will probably get the upper hand — but for all other vacuuming considerations, Kirby is the way to go.
Kirby vacuum prices are higher than many vacuums found at big-box stores, but that`s because Kirby vacuums are made of durable materials that will last for years. Why replace an inexpensive vacuum over and over again when you can purchase a Kirby vacuum? This complete home cleaning system that will last for a lifetime.
Overheated Motor
If your vacuum was working fine and then suddenly shut off, it may have overheated. Most vacuums are equipped with a thermal protector safety switch that won`t allow the motor to run when it becomes overheated. You will need to wait for 30 minutes to 2 hours, depending on your machine, to try again.
There is a fill line on the disposable bag and when the dirt reaches this line you should replace your disposable bag because it is no longer filtering properly. Be sure to utilize only Genuine Kirby filter bags, available here to ensure your Kirby system is cleaning properly.
At a minimum, aim for every other month. However, if you use your vacuum most days, a new filter bag every month is your best bet.
On most Kirby vacuum cleaners, filtration is managed by the filter bag that is used to collect dust and debris.
Fuse boxes are typically located in your home`s basement, garage, or utility room. If you have an older home, you may have a fuse box instead of a circuit breaker. Fuse boxes are not as common as they once were, but they can still be found in some homes.
Q: It smells like the belt is burning. What is wrong? A:It is likely the belt isn`t turning freely on the brush roll. Flip out the belt lifter handle and turn it clockwise until the green arrows line up.
The price of vintage Kirby vacuum cleaners can vary widely, depending on their age and condition. The least expensive ones are probably worth about $100 and high-end models might sell for $2,000 or more. But if you`re looking to buy one that hasn`t been refurbished, expect to spend several hundred dollars.
How Vacuum Switches Work. Once the switch registers a change in the negative pressure based on the preset sensitivity of the setpoint, the diaphragm of the switch will open or close the attached circuit, turning off or powering on a device. Vacuum switches can be used with NO and NC states.
Manufacturing Date: 1993 – 1997
– The Kirby G4 model featured a brand new 3-position handle locking mechanism as well as other improvements that made it easier to maneuver and function! It also included optional accessories and attachments to enhance the cleaning power and versatility of this specific model!
Their vacuum cleaner prices range from $995 to $2500. Now, you might be wondering if they are worth the large price tag.
This rebuild program is unique to Kirby. It`s certainly possible to repair older Rainbow vacuums and return them to impressive functionality, but the like-new condition cannot be guaranteed. Hence, while Kirby and Rainbow vacuums are built to last, Kirby ultimately gets the edge on longevity.
Kirby: Right Back at Ya!, known in Japan as Kirby of the Stars (星のカービィ, Hoshi no Kābī, Japanese pronunciation: [hoɕi no kaːbʲiː]), is a Japanese anime series based on Nintendo`s Kirby franchise.
The unique pink ball with big eyes is still starring in titles that top the charts, 30 years after the original game`s release. For Eliza Sharp, founder of online Kirby fan account Kirby Informer, the character has stood the test of time because his games have been so distinctive from the competition.
The average life expectancy of a mid-range vacuum cleaner is about six years. You can fix or replace things like blocked filters, jammed brush rolls, frayed hoses, worn-out stick vac batteries and broken accessories yourself.
A strong odor from the shellac that coats the copper coil windings is an indicator that the motor is about to or has burnt out. If the motor is still running, even if it turns on and off by itself as it is heating and cooling, you can still run the motor until it gives up for good.
If you don`t vacuum your carpet, the dirt will break down carpet fibers and create a breeding ground for dust mites and bacteria. In addition, your home will begin to smell musty from the dirt, mites, and other organisms settling into the fibers.
The Kirby Home Company warrants that the product shall be free from defects in material and workmanship for three (3) years from the date of purchase when the Kirby system is used for residential consumer purposes.
A full vacuum bag can also cause the motor to overheat and eventually fail, resulting in costly repair expenses or the replacement of a new vacuum. If you are using an upright vac with a belt-driven system, a full bag will increase the amount of force required to spin the brushroll, which can damage the belt.
Kirby Battle RoyaleEdit
In multiplayer modes, the player has the option of changing Kirby`s color, as well as the colors of other characters.
Relevant Questions and Answers :
the most relevant questions and answers related to your specific issue
Electrolux Epic 6500SR Full Bag sensor working, Does not Reset properly
ANSWER : The problem was a sticking switch that was not being reset. The vacuum on/off switch mechanism is comprised of two switches. One is the main switch that turns the vacuum on and off. The second is a shut off switch that gets tripped when the full bag sensor is engaged. This second switch is supposed to get reset when you push the on/off switch on the outside of the machine. The full bag shutoff switch was stiff and it, therefore, was taking a couple of presses of the on/off switch to move the shutoff switch back into the running position.
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
Where is the safety switch on the kirby g 4 – Kirby G4 Bagged Upright Vacuum
ANSWER : One is at the front to the left of the fan as you look at the fan spindle with the front brush housing removed, detecting that the front attachment has been fitted correctly and the other is on the right hand side behind the hose outlet to the bag ensuring the bag or exhaust attachment has been fitted correctly, both have to be operated in order for the machine to work. These work in conjunction with the on/off switch at the rear.
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
I have a Kirby G4 Vacuum Cleaner – MOdel G4 D. I have never had any problems or repairs done to it in the past ten plus years that I’ve had it. This is an upright vacuum. I was vacuuming the carpet floor and was not having any trouble at all. I switched the vacuum off and moved it into a different room. When I tried to turn on the vacuum, it would not turn on. I checked with different outlets, used both front attachment and hose attachment. Checked the front part of the motor/ spiral case. This
ANSWER : Hello,
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci
.My educated guess is that it’s either the switch or the power cord. Here are a couple of guides to help with diagnosis and repair…
.
.http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312
.
.http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
.
.Hope this helps!!
.Marci
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?
ANSWER : Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I’m surprised it lasted as long as it did.
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)
.This is where a vacuum that won’t run without a bag would have been nice. (Aerus for one)
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
How do i clean the chromr on kirby g4 vacuum – Kirby G4 Bagged Upright Vacuum
ANSWER : The Kirby is polished aluminum. It is best cleaned with mag wheel polish, and lots of “elbow grease”.
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor, not contacting the carpeting?? I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting. Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
While vacuuming the red light for the bag of the vacuum came on and the vacuum stopped. The bag was no where near full so I replaced it with a new bag – same problem. It vaccumes for a minute or then stops with bag light on. It is the correct bag for the machine – so what’s the problem?
ANSWER : I’m assuming this is the Epic 6500 or similar model.
.Detach the hose, turn vacuum on. If it runs, place palm of hand against inport hole. If it shuts off the problem is with either the control valve setting or the control valve assembly itself.
.For cvs, turn dial on top of vacuum all the way to the largest dot, and try above test again. If that doesn’t work, then it’s the CVA. It needs to be cleaned or replaced, which is an in shop job. Fro repair, take it to the nearest Aerus Electrolux store. I recommend a full clean and service to remove any dust/dirt from the motor, fan assembly, and other internal parts.
.
.Another problem, which relates to the dial setting, is that fine dust will quickly clog the pores of the bag, resulting in the machine “thinking” the bag is full. Turning the dial to the proper setting helps get the bag fuller. The middle setting is the normal setting, and is for areas without fine dust and sand.
.Detach the hose, turn vacuum on. If it runs, place palm of hand against inport hole. If it shuts off the problem is with either the control valve setting or the control valve assembly itself.
.For cvs, turn dial on top of vacuum all the way to the largest dot, and try above test again. If that doesn’t work, then it’s the CVA. It needs to be cleaned or replaced, which is an in shop job. Fro repair, take it to the nearest Aerus Electrolux store. I recommend a full clean and service to remove any dust/dirt from the motor, fan assembly, and other internal parts.
.
.Another problem, which relates to the dial setting, is that fine dust will quickly clog the pores of the bag, resulting in the machine “thinking” the bag is full. Turning the dial to the proper setting helps get the bag fuller. The middle setting is the normal setting, and is for areas without fine dust and sand.
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
How to change a band on a kirby vacuum? – Kirby Ultimate G Bagged Upright Vacuum
ANSWER : I think you mean belt??
.
Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on the front until it locks, when it grabs the belt it will be hard to turn. Re-install the nozzle on the machine and lock it down. Turn the knob again all of the way, this will release the belt unto the pulley.
.
Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on the front until it locks, when it grabs the belt it will be hard to turn. Re-install the nozzle on the machine and lock it down. Turn the knob again all of the way, this will release the belt unto the pulley.
Read Full Q/A … : Kirby G4 Bagged Upright Vacuum
