Bissell Healthy Home HEPA Bagless Upright Vacuum – Metallic Blue\015 When I turn on the vacuum, it starts to smell like something is burning.\015

How to Identify and Fix Common Vacuum Problems ?

Our sources include academic articles, blog posts, and personal essays from experienced Vacuum Technicians :

If you`re smelling rubber, the belt has either burned out and snapped or the belt has become so stretched out that the roller is not moving and the vacuum belt is getting super heated from the motors RPM.
Carpet cleaner smells like burning and may be caused by overheating debris in the machine or a malfunctioning motor. To resolve the issue, unplug the cleaner, inspect for blockages, clean the filters, and check for damaged components. If the problem persists, contact a professional or the manufacturer for assistance.
The Bissell steam cleaner may have a burning smell if the device is operated without water in the tank. While the lack of steam from the nozzle should alert users to the fact that something is amiss, some may try to continue to operate the machine before checking the tank.
The air intake pipeline of the brush accessories may be clogged, or the roller accessory may be blocked due to dirt build-up. If you keep using your vacuum while these parts are not fully functioning, there may be an unpleasant burning smell coming from your appliance. Clean these parts and remove any dirt build-up.
In many cases, the smoke you see is actually mechanical pump oil vapor. Many people tend to think that whenever there is smoke emitting from the pump, it means there is something wrong with the machine. But, oil vapor or oil mist is a natural by-product of creating vacuum in an oil sealed mechanical pump.
As the cleaner head and filter fills with dirt and debris over time, all the built-up debris begins to emit a burnt-smelling odour. You may need to remove and clean out the vacuum`s filter. We need to advise you to stop using your machine and request that you contact your local customer support team.
How long does it take carpets and upholstery to dry after carpet cleaning? On the average, it will take approximately 2-4 hours for carpet and upholstery to dry after being carpet cleaned. To expedite the drying process, you will want to use a fan and increase your air circulation.
Burning smell can indicate motor damage

If you suspect that the motor is damaged, you should not continue to use the vacuum cleaner! The cause of motor damage is usually wear and tear or damage caused by prolonged improper use (e.g. overheating). In most cases, it is not worth repairing.

An electrical fire smell is often described as a “burning plastic” smell. This is because when wires overheat, the insulation surrounding them begins to break down and release chemicals into the air. These chemicals can have a strong, acrid smell that can be difficult to ignore.
Add a teaspoon of vanilla powder to the canister on your bagless vacuum, and hoover away! As you move around the house with the cleaner, the smell will start to permeate, and you`ll be left with a pleasant aroma.
Put Dryer Sheets Inside The Bag

Place a dryer sheet into the dust bag of your vacuum cleaner before cleaning to improve the fragrance of the vacuum cleaner itself. In addition, you may use some orange peel or a few drops of essential oil on a piece of paper towel to remove the odor.

When a thermal cut off activates, it shuts the motor down. This prevents the motor from overheating to a point where it will no longer function and will need replacing.
If there is a strong burning smell coming from the motor area of your Dyson DC14 or DC07 then it is most likely that your motor has burnt out.
Check the LED light to determine the battery level. A solid blue light indicates that the machine is in normal operating mode. A flashing blue light indicates that there is no power, and the battery needs to be charged for a minimum of 3.5 hours.
A plastic burning smell in house situation can occur from a number of sources. Faulty wiring or an overheated appliance can have an odor that smells like burning plastic. If it`s coming from your HVAC system, it could be from an overheated blower motor — possibly due to heavy dust buildup or a clogged air filter.
In general inhalation of plastic fumes can lead to an increased risk of heart disease, respiratory side effects such as aggravated asthma, skin irritations, headaches, nervous system damage, and other organ damage such as the kidney, liver, and reproductive system.
If you smell burning plastic in your home, the first thing you need to do is open all of the doors and windows to ventilate the space. There are a few possible causes for this odor, and none of them are pleasant. The most apparent reason is that you accidentally melted or burned plastic.
Just empty the water out of the tank after each use. Doing so will prevent leaking and extend the life of your filter.
Bissell Crosswave Pet Pro All in One Wet Dry Vacuum Cleaner

A: Yes, you can leave clean formula/water in the tank when not in use.

Yes, you should keep cleaning the carpet until the water is clear. This will ensure that your carpets are clean and free of dirt, dust, and other allergens. However, you should be careful not to scrub too hard or use too much water. Doing so can damage the carpet and lead to more stains in the future.
Most cleaning methods simply can`t remove all the old hair, dust mites, dirt, soapy residues and chemicals. After the cleaning crew leaves, the gunk remaining in your carpeting acts like a magnet for a whole new layer of grime.
Burning Plastic: The acrid odor of an electrical fire is often described as that of burning plastic. This is because wiring insulation, connectors, and many other electrical components are made of plastic materials. Electrical fires often start behind walls, so you`ll sometimes start to smell rather than see one.
Electrical Fires Not Only Smell Bad, But They`re Also Toxic

This results is toxic fumes that include ketones and aldehyde gases that are harmful to inhale. Polychlorinated biphenyl (PCB) by-products are also emitted from electrical burning equipment that can cause cancer and other serious health issues.

Relevant Questions and Answers :

the most relevant questions and answers related to your specific issue

Rainbow Vacuum smells like something is burning.
ANSWER : Your belt is worn and that is why there is a burnt rubber smell. You need to change your belt. You can find a replacement belt and instructions here:

Rainbow Replacement Belts

Dirt devil vacuum cleaner–trouble vacuuming dirt and pet hair on carpeting –is the problem with the spinning brush which contacts the floor,  not contacting the carpeting??  I thought (when I bought this vacuum) that the aforementioned brush was adjustable to various heights of carpeting.  Sometimes, it seems like nothing is being vacuumed up –unless I have just put a new bag on the vacuum… Do I need or can I replace the spinning brush on the bottom of the vacuum so it kicks up and vacuums
ANSWER : Try replacing the belt. Rubber belts stretch out after about a year.

Burning smell I had purchased a hoover widepath tempo vacuum two years ago and recently when I turn it on to vacuum it smells like something is burning.
ANSWER : The belt needs changed. its slipping. make sure its not clogged with carpet or string ect. first. if not buy a belt at walmart. in stock…

The original belt on my upright Kenmore Progressive broke and I replaced it with the spare that was in the vacuum. The vacuum and spare belt are about 10 years old. Then the spare broke after one vacuuming session and there was a burning smell coming from the vacuum. I ordered new belts and replaced it with the new belt. It seems to be working fine with no smell. I checked the belt after I vacuumed the family room and although it was in tact, the belt was very hot. Is that normal? Should t
ANSWER : The belt heats up due to the friction, as well as being in contact with the shaft of a hot motor. It is normal.

Motor is sparking and smells like burning rubber. When it first happened I thought the vacuum had something jamming the beater bar. That was the smell it had, like when the belt gets burned. But when we turned it over, it wasn’t jamming. Took off the base plate and turned it on. The motor area is sparking and it makes a weird noise (I assume that is because the motor fails and restarts). I looked for loose wires, can’t find any. I believe I need some sort of part replaced, maybe even a n
ANSWER : From sound and description most possible is motor is burnt up sparks usually mean metal on metal either bearing or bushings went on motor if u can jiggle the shaft thats bearing if u rotate the shaft by hand and feel and or hear rough grinding the brushes are damaged and the (windings)are also would need to replace motor oreck has a costumer service 800 989 3535 number give them a call not always but some times they will ship a replacement part for free

Burning Smell coming from the moter
ANSWER : This could be a motor problem. There is always a slight blue arcing that occurs when an electrical motor runs and can be visible through the exhaust vent, but any excessive arcing indicates a problem. If the carbon brushes are sticking, this will cause excessive arcing and can be corrected by an experience service person, but if there is any electrical failure, the motor would have to be replaced. There are no parts available for these motors and the expense of replacing an armature (the likely culprit) would be more than the motor. This could also be as simple as a worn belt, but usually, belts will not produce the smell your describing. When a motor is burning out, it will produce an acrid odor that will linger for a long time.

Bissell lift off pet revolution vacuum smells bad when I vacuum!
ANSWER : Put a BOUNCE sheet inside the filter

I purchased a brand new Eureka Pet vacuum, sorry don’t know exact name but it the one that has the self cleaning duster on it. Last night I used the vacuum on my carpet, it was working fine until I accidently sucked up the corner of a scarf that was hanging off a couch. I shut the vacuum off, pulled out the scarf and and resumed vacuuming. Much to my dismay the suction on the vacuum had ceased. Can you tell me if there is a reset button on the vacuum? The vacuum does not appear to be damage
ANSWER : If the motor is running, there should be suction. Possible problems depend on whether it’s a canister or upright and are:
.A clog in the hose, UR or canister. Detach hose. Drop small coin in one end and lift hose causing it to roll out the other. If it does, no clog in hose. Drop same coin into hose opening on power head. If it rolls out, no clog in PN.
.Broken fan blades, UR. Needs to be taken to shop for repair/replacement.
.
.A reset button is for use if the motor isn’t running, so won’t have anything to do with the suction.