The Best Vacuum for Concrete Floors

The modern vacuum cleaner market offers a wide range of harvesters of different models. When choosing an assembly, determine the set of basic parameters that determine the functionality and performance of the device.

What is the Best Vacuum for Concrete Floors

One of the main indicators of the efficiency of the vacuum cleaner is its power. Distinguish the power consumption of the vacuum cleaner and the power of dust absorption.

The power consumption of the vacuum cleaner ranges from an average of 1000 to 2000 watts.

The maximum power consumption is effective for several minutes after the vacuum cleaner is switched on.

bisselle Hard Floor Expert Canister Vacuum 1547

The buyer is mistaken, believing that the more power is consumed, the better the cleaner collects dust.

The efficiency of cleaning is not directly dependent on the power consumption. It is influenced by other indicators. Therefore, several vacuum cleaners with the same power consumption may differ in suction power.

When choosing a vacuum cleaner, pay attention to the ratio of power consumption and suction power, which will suit you for power and energy efficiency. The efficiency of cleaning depends on the suction power.

The average effective suction power is the ability of the vacuum cleaner to suck in dust for a long time with a certain power. It is determined after the first 5 minutes of the vacuum cleaner.

Dyson V7 Motorhead vacuum cleaner

The maximum suction power is the power with which the vacuum cleaner sucks in the dust for the first few minutes. It is 15-30% larger than the average effective suction power. This is the highest index of suction power.

The average suction power decreases as the dust container becomes dirty and filled.

When choosing a vacuum cleaner, pay attention to the average index of suction power, since vacuuming is a longer process than the first 5 minutes.

The greater the suction power, the stronger the intake air flow inside the vacuum cleaner.

The consumer has the opportunity to independently choose the suction power of the vacuum cleaner, using the switch depending on the degree of contamination of the room being cleaned. Buy a cleaner with more power and use the regulator to increase or decrease the suction power, based on the degree of surface contamination.

The suction power of the vacuum cleaner is determined through the discharge (h) and the air flow (q) and is equal to their product.

The suction power depends on both criteria, on their normal ratio. If the air flow is good, and the discharge is weak, then any resistance will cause a decrease in the efficiency of the vacuum cleaner.

If the discharge is sufficient, and the airflow is weak, then the heavy particles will remain on the floor or carpet.

For cleaning small apartments a vacuum cleaner with a suction power of 250 W is suitable.